ATS 5029814248 Edge Attitude Angled Overhead Mount w/ Switches
Use the ATS 5029814248 Edge Attitude Angled Overhead Mount w/ Switches in your 01-07 GM 6.6L Duramax to Mount your Edge Products attitude in the overhead compartment in your truck.
- Single piece of brushed aluminum
- Switches can be used for any accessories
- Angled for easy viewing
- Extension cable may be required
EXTENSION CABLE BELOW MAY BE REQUIRED.
Does not work with sunroof option.
| To install the Attitude Mount:
First, remove the center console off the headliner by removing the screw out of the front, slide unit out and down. Disconnect the wires and take the unit out. Remove the black lower piece out of the console.
Next, take the screws out of the back of the Attitude Monitor. Separate the two halves. Remove the sticker that is placed between the two halves and put it on the back of the display. Sandwich the unit into the mount hole and put the screws back in place. Now, push the mount into the console from the back (it will stay in place with friction). Guide the wire from the mount through the headliner to the driver's side 'A' pillar and route it down through to under the dash. Plug in the wires for the lights and reattach the center console back to the roof.
Customer Reviews - Include your order number for a chance to win a $100 GiftCard
10/1/2009 10:45 AM
The only way to go!!! Perfict fit looks great an its not as noticeabul as a dash mount when you get pulled over for blowing the doors off of those other guys lol. The only down side is voiding the warenty on the module but i would do it agine!
Attitude Angled Overhead Mount
1/5/2007 2:27 PM
the aluminum mount looks hott in the overhead consol; but if you were looking to use the attitude monitor as your main speedometer you should probably mount it closer to the dash. because it is not as easy to see than you might think. I like it because its up and out of the way yet it still looks cool, and is a great use of space. the switches are also convenient.
Tim C. 2001 GMC Sierra 2500 4x4
8/8/2007 11:28 AM
I like the Fit, and finish of the product. As for view of the display I have no problem. The only thing I'm not to happy with is having to split the case on the Attitude. To mount the monitor. Which voids any warranty.