Amsoil Multi-Vehicle Synthetic Automatic Transmission Fluid (ATF)
Recommended for transmissions, hydraulics, power steering systems
Synthetic Universal Automatic Transmission Fluid (ATF)
Package sizes include:
1-Quart Bottle #AMATFQTEA
1-Quart Bottles (case of 12) #AMATFQTCA
1-Gallon Bottle #AMATF1GEA
1-Gallon Bottle (case of 4) #AMATF1GCA
2.5-Gallon Bottle #AMATFTPEA
2.5-Gallon Bottles (case of 2) #AMATFTPCA
30-Gallon Drum #AMATF30EA
55-Gallon Drum #AMATF55EA
AMSOIL Signature Series Multi-Vehicle Synthetic ATF is engineered to outperform conventional automatic transmission fluids and exceed the performance requirements of most North American, European and Asian vehicles. This sophisticated formulation provides outstanding performance and protection in the severe operating conditions of today’s most advanced transmission designs.
Transmissions in commercial vehicles, SUVs, trucks and vans – particularly those used for hauling or towing – are subjected to severe-service operation and increased heat. Elevated temperatures cause fluids to break down, allowing damaging metal-to-metal contact and the formation of sludge and deposits. The problem is worse in modern transmissions with more gears, clutch packs and narrow oil passages that require clean, high-quality fluid to achieve maximum performance and life.Protects Against Thermal Breakdown
AMSOIL Signature Series Synthetic Automatic Transmission Fluid is specifically formulated to withstand the rigors of heavy towing, elevated temperatures and challenging terrain. It remains fluid in sub-zero temperatures and provides reserve protection during heavy use and even abuse.
Signature Series Synthetic ATF is formulated with high concentrations of antioxidants, making it naturally heat resistant. As a result, it provides outstanding protection against sludge and varnish deposits that clog narrow oil passages and contribute to clutch glazing. After 100,000 miles in severe service, fluid analysis revealed Signature Series Multi-Vehicle Synthetic ATF contained 41 percent of its original oxidation inhibitors, proving its long-lasting resistance to thermal breakdown.
Outstanding Wear Protection
Varying speeds and loads causes torque multiplication and extreme stress on gears and bearings. AMSOIL formulated Signature Series Synthetic ATF with high film strength and premium anti-wear/extreme-pressure additives to help prevent wear during severe service. In the industry-standard FZG Gear Wear Test, Signature Series Multi-Vehicle Synthetic ATF that had been used for 100,000 severe-service miles achieved a “Pass” at stage 12 – the highest stage. The results exceeded the Ford MERCON V and Chrysler ATF+4 specifications for new fluid, demonstrating the lubricant's long-lasting wear protection.
Cold, thick automatic transmission fluid lengthens shift times and reduces fuel economy. Signature Series Synthetic ATF is wax-free and delivers extraordinary cold-flow properties (< -60°F pour point). It helps improve shift response, energy efficiency and warm-up times.
Today’s transmissions are smaller and must withstand higher horsepower and torque while delivering smoother shifts, all with longer fluid life recommendations. AMSOIL Signature Series Synthetic ATF is formulated with friction modifier additives that deliver outstanding clutch-holding capacity (static friction), torque-transfer ability (dynamic friction) and anti-shudder properties (slipping torque-converter clutches). Analysis reveals that after 100,000 miles in severe service, Signature Series Multi-Vehicle Synthetic ATF provides nearly identical friction properties as new fluid for smooth, reliable shifts.
AMSOIL Signature Series Multi-Vehicle Synthetic ATF is recommended for transmissions, hydraulics, power steering systems and other applications that require any of the following specifications:
- Ford MERCON®
- MERCON® V
- GM DEXRON® III
- Chrysler ATF+4®
- MOPAR® AS68RC
- Allison C-4
- Audi G 052 162, G 055 025, G 052 990
- BMW 7045E
- LA 2634
- LT 71141
- Honda ATF-Z1 (not CVT)
- Hyundai / Kia / Mitsubishi SP-II and SP-III
- Idemitsu K17
- JASO 1-A
- JWS 3309, 3314, 3317
- ATF Red-1
- MAN 339F, 339 V1, 339 V2, 339 Z1, Z2 & Z3
- Mazda ATF-M III, ATF-MV, ATF-FZ
- Mercedes Benz 236.1, 236.2, 236.3, 236.5, 236.6, 236.7, 236.9, 236.10, 236.11, 236.81
- Nissan Matic-D, Matic-J, Matic-K
- Shell 3403, LA 2634
- Subaru ATF, ATF-HP
- Suzuki 3314 & 3317
- Texaco ETL-7045E, ETL-8072B, N402
- Toyota Type T-III and T-IV
- Voith 55.6335.XX (G607), 55.6336.XX (G1363)
- Volvo 97340, 97341
- Volkswagen G 052 162, G 052 990, G 055 025
- ZF TE-ML 03D, 04D, 05L, 09, 11B, 14A, 14B, 14C, 16L, 17C
Note: Not for use with CVT or Ford Type F applications.
Normal Service: Follow the vehicle manufacturer's normal-service drain interval.
Severe Service: Double the vehicle manufacturer's severe-service drain interval.
Change at the vehicle manufacturer's recommended drain interval outside U.S. and Canada.
|Typical Technical Properties
|AMSOIL Signature Series Multi-Vehicle Synthetic ATF
|Kinematic Viscosity @ 100°C, cSt (ASTM D 445)
|Kinematic Viscosity @ 40°C, cSt (ASTM D 445)
|Viscosity Index (ASTM D 2270)
|Pour Point °C (°F) (ASTM D 97)
|Flash Point °C (°F) (ASTM D 92)
|Four Ball Wear Test @ 75°C, 1200 rpm, 40 kg, 1 hr, Scar, mm (ASTM D 4172)
|Brookfield Viscosity, cP (ASTM D 2983)
Customer Reviews - Include your order number for a chance to win a $100 GiftCard