DTech DT60FICM Fuel Injection Control Module (FICM)
Manufacturer Number: DT60FICM
XDP Part Number: DT60FICM
03-07 Ford 6.0L Powerstroke
|The DTech DT60FICM is a direct replacement for your failed, factory FICM. This standard 48V remanufactured FICM is pre-programmed and does not require any "flashing" from Ford for F-250 through 550 models.
Application Note: Ford F650/750 applications use the VT365 engine with the Navistar engine management system. When the FICM is installed on the F650/750 the engine will run, but the check engine light will be turned on and a DTC is set. The DTC is 613. PCM/IDM software is incompatible. The FICM will need to be reprogramed with the appropriate Navistar device.
All DTech products
are warranted to be free from defects in material or workmanship for a
period of 12 months or 100,000 miles from date of original product
installation, whichever occurs first. We will replace any part that
fails during the warranty period and is determined to be defective in
material or workmanship. If defective product is replaced it will be
warranted for either the remainder of the original warranty period or
120 days, whichever is longer. We will also pay standard labor rates and
times for product removal and reinstallation