Answer All of the above. The Edge Products 38305 Dash Pod fits the old Juice With Attitude along with the new Color Screen (CS) and Color Touch Screen (CTS) versions. Please note that if you are using this for the CTS you will need the pod adapter listed in the related items below.
You can also find a direct link to it here:
http://www.xtremediesel.com/edgeprodu...
Edge Products was not able to supply us with an on-line version of the specific instructions for the Edge Products 38305 Dash Pod. The Dash Pods will all install in the same fashion. Here's some installation instructions for another model which will be very similar.
1. To secure the pod: locate the metal brackets and the pod in your evolution box. Note
that the brackets are numbered and should be placed in the appropriate numbered
locations inside the pod. Use the permanent double sided tape to secure the brackets
to the inside of the pod, be sure that the numbers match
TIP: Be sure to check the position of the brackets while the Pod is resting in its
desired location on the dash prior to attaching them to the Pod with the double
sided tape. This will help you avoid repositioning the brackets after the tape has
adhered.
2. Clean the pod location on the dash with hot soapy water and rinse, or use 70%
Isopropyl alcohol. Thoroughly dry the location. Attach the supplied Velcro to the
bottom of the mounting brackets in the pod. Leave the protective backing on the
bottom piece of Velcro, and test fit the pod so you have an idea of where you want it.
Once you have determined the appropriate positioning, remove the backing paper
from the Velcro, place the pod in it’s desired location, and firmly press down on the
brackets (through the front of the pod) to secure the Velcro in place.
3. After the pod is secure, insert and seat the rubber gasket into the Pod opening and insert the Evolution into the pod.
If you have any further questions on the installation of this pod, please feel free to contact one of our Performance Specialists at 1-888-DIESEL-4