H&S Performance 209006 Cummins 5.9L XRT Pro Street Tuner
06-07 Dodge 5.9L Cummins
Mfg. Number: 209006
XDP Part Number: HS209006
The H&S XRT Pro Street Tuner will ONLY work with the factory emissions equipment installed.
The XRT Pro Street tuner is the perfect combination of high performance and value. The XRT Pro Street offers multiple power levels to exactly match your needs. Whether you simply want some extra power to pass when towing, or want an all-out high performance tune, the XRT Pro Street has you covered!
Power Levels can be adjusted on-the-fly at the touch of a button after Installing the Download to the vehicle. To adjust the Power Level, select Change Power Level from the Main Menu.
- Stock HP
- Tow: 60 HP
- Street: 120 HP
- Performance: 200 HP
This option allows for the adjustment of the factory rev limiter. Most 5.9L Cummins trucks have a 3500 RPM rev limiter from the factory. The limiter can be adjusted from 3000 RPM to 5000 RPM. This option can only be adjusted during the Install Download process.
Torque Management (Automatic Transmission Only)
This option allows for the disabling of the vehicles torque management for those equipped with automatic transmissions. This is recommend for those running standalone aftermarket TCM/transmission packages but will also slightly improve throttle response on a stock truck.
Note: By turning the torque management OFF, the PRNDL display will be lost.
Tire Size CalibrationOverdrive Transmission Software
This option allows for the re-calibration of the factory speedometer to adjust for non-stock sized tires. For the most accurate speedometer reading when using non-stock sized tires, it is best to measure the diameter of the tire using a tape measure rather than going by the printed tire size. In addition, using a GPS is a great way to dial in your factory speedometer. Entering a larger tire size will cause the factory speedometer to read higher while entering a smaller tire size will cause the factory speedometer to read lower. The tire size can be adjusted from 24” to 42”. This option only takes a few seconds to change and can be adjusted at any time from the Tire Size Calibration menu.
Custom tailored to mate with H&S engine tuning, the 5.9L Overdrive software includes modified torque converter lock/unlock strategies that will command the TC to lock in 3rd gear under wide open throttle and hold it locked through 4th gear. Light throttle torque converter strategies have also been changed to lock-up sooner, keeping more power directed to the road instead of wasted in heat and friction. Shift points are modified to take advantage of the available horsepower and torque output. On a 2006 Cummins with a stock 48RFE, we have seen 0.2 to 0.3 second quicker 1/4 mile times JUST from the addition of the H&S Overdrive tuning! An additional unlock fee may apply.