Shop By Diesel


MBRP 4" Dual XP Series Turbo-Back Exhaust System S6202409

List Price: $1,087.05
XDP Price: $879.99
You Save: $207.06 (19 %)
Manufacturer: MBRP Performance Exhaust
Manufacturer Number: S6202409
XDP Part Number: MBS6202409

Application: 99-03 Ford 7.3L Powerstroke F250/F350 (All Bed & Cab Config.) 4X4 Only

XDP $5 Pricebeat Guarantee
XDP - MBRP Authorized Online Retailer XDP is a MBRP Factory Authorized Online Retailer ID# 600207727. We would like you to shop with confidence knowing your purchase is covered by the manufactures warranty.   

The Best Systems Start with the Best Materials

MBRP's XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This system's rugged sixteen gauge T409 construction can be counted on to withstand everything from salt to rocks, tar to grime. We have had such success with this line that we back it with a Lifetime Warranty.

Built to Perform
You count on your truck to tow all of your gear to where you want it. With your MBRP performance exhaust you can make that happen with up to18 HP more horsepower and 28 ft/lb more torque. Give your truck more pulling power and much improved throttle response with an MBRP diesel exhaust system. Our systems are so much more efficient, it will be easy to see what your truck can really do.

Minimize Backpressure

The secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200ºF and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.

Easy Installation
MBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installing this on your truck a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.

Sound & Style

Performance is one thing but at MBRP we believe that appearance and sound is just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our MBRP brand etched on the tip and our unmistakable styling, there's no question that you have the hottest exhaust on the road - MBRP.

Features:

  • 4" T409 Stainless Steel Construction
  • Turbo-Back Dual Exhaust System
  • Lifetime Warranty
  • Rich, Mellow Exhaust Note
  • Installs With Common Hand Tools
  • Mirror Polished, T304 Stainless Steel Exhaust Tips

Dual Exhaust Systems are not recommended for use on trucks with in-bed hitch.


Buy Now and receive a MBRP mirror polished stainless steel angled cut exhaust tip(s) FREE!

Free MBRP Exhaust Tip




Product Reviews

Rate This Product:
or Create a Review
(7 Ratings, 2 Reviews) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Not as Advertised
Rob (Culpitt) 2/25/2012 11:01 PM
First the Turbo down pipe was a breeze the rest was a nightmare.. One hanger lined up correctly, clamps were subpar and had to be grinded to fit around pipes. etension pipe had to be cut on band saw at 6-7 inches for Ext Cab! Really I had to cut a 6" piece out of a 3' section of Stainless!! Waste!! Pipes rub on bed, heat sields and shocks... Sorry for the review but would not recomend to anyone.. $800.00 mistake and one lesson learned.
ratingratingratingratingrating
not impressed
Joe C. (PA) 6/25/2009 10:22 AM
Sounds amazing, thats it. you lose engine braking-pipes were scratched everywhere-had to clean out the pipes because they were filled with grease, metal shavings, and styrofoam peanuts-clamps don't tighten enough and when you try to tighten more they break-pipes do not line up right and for them to be close to even they rub everywhere, shocks, springs underside of bed, fuel tank shield, firewall, I am worried about heat/fire and am thinking about installing heat shields for protection, seems as if they weren't bent properly-the quality of the material is good but for the price it should fit like a glove and there should not be this type of aggrevation putting it on. Unfortunately I cannot return it now that it is installed so I will continue to tweak it to see if I can get it to fit better and will update later. I have been happy with all my prior purchases to this point. sorry for the bad review.

Related Products

MBRP Angled Exhaust Tip (4" Inlet, 5" Outlet) T5053 "XDP Special Edition"
List Price: $67.56
XDP Price: $39.95
You Save: $27.61 (41 %)
ratingratingratingratingrating
MBRP Angled Exhaust Tip (4" Inlet, 5" Outlet) T5053 "XDP Special Edition"
Universal - 5" O.D. Dual Wall Angled, 12" Length, 4" Inlet
MBRP Universal Muffler Delete Pipe
XDP Price: From $39.99 to $119.99
ratingratingratingratingrating
MBRP Universal Muffler Delete Pipe
Universal - All Makes, All Models - Many Sizes (fabrication required)
MBRP Pro Series Diesel Exhaust Tip
XDP Price: From $49.99 to $79.99
ratingratingratingratingrating
MBRP Pro Series Diesel Exhaust Tip
Universal: 4” and 5” inlets - 5”& 6" diameters - 12" & 14” in length
Google