S&B Filters Performance Intake Elbow 76-1007
Manufacturer: S&B Filters
Mfg. Number: 76-1007
XDP Part Number: SBF76-1007
|Multiple Ports, Many Possibilities.
Our new elbow provides 8 ports so you can inject & monitor until your heart's content. We've also provided airtight plugs to cover any unused ports.
Yes, we tried to blow it up.
Authorized Testing Inc. performed the burst testing on our new CNC elbow. To perform the test, both ends of the elbow were sealed, and water was pumped into the elbow until the point of failure. The S&B elbow withstood up to 300 psi before it cracked at the weld. A stock truck would see no more than 30 psi. A truck with all the bells and whistles should see no more than 100 psi.
Better than our competitors
Advanced flow software technology is a huge technical edge that allows our engineers to eliminate dead areas, pinpoint optimal velocity, streamline the airflow, and beat the other guys!
The standard procedure for attaching an elbow to an intake has been to run two bolts through the interior of the elbow. This restricts airflow and hinders performance. Our new elbow attaches with four bolts on the outside of the elbow resulting in a tighter seal, increased airflow and better performance.
- 100% Machine Cut & Tig Welded Aluminum
- Increased Flow, Spool-Up & Throttle Response
- 8 Pre-Drilled & Tapped Ports
- CARB EO Number: D-590-7
4/1/2011 8:48 PM
must agree with 1st guy voke school tap job!!!!!!!!!!!!!!
makes a difference
4/6/2010 8:36 PM
I cannot say that it is not worth the money, but these guys need to learn how to tap holes straight, very aggravating. To aid, make sure your run a 1/8" pipe tap through the holes first, you will have a much clearer view of how to start the threads.