AFE Stage 2 Cold Air Intake System Type XP 54-10932-1


List Price: $498.75
XDP Price: $359.10
You Save: $139.65 (28 %)

Application:
2003-2009 Dodge 5.9L & 6.7L Cummins
Manufacturer: AFE
Mfg. Number: 54-10932-1
XDP Part Number: AFE54-10932-1

XDP $5 Pricebeat Guarantee



  • Increases horsepower & torque.
  • Maximizes airflow for better acceleration and responsiveness
  • Improved performance results in greater fuel efficiency
  • Installs in less than 60 minutes using factory mounting points
  • No cutting or drilling to engine compartment is required
  • Replaces OE air filter with high flow high performance 360 degree radial flow air filter
  • Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed
  • Replaces factory air box with a heat-blocking shield that seals to the hood
  • Limited lifetime warranty
     
    Product Specifications:
     
    Airflow Increase
    292 vs. 161 cfm for Stock @1.5" Water
    Replacement Filter
    • 24-91026 (Standard)
    • 72-90021 (Pro-guard7)
    Pre-filters 
    • 28-10031 (Gold)
    • 28-10032 (Red)
    • 28-10033 (Black)
    • 28-10034 (Blue)
    Box Dimensions
    22.5 X 16.5 X 13.5"


  • Customer Reviews - Include your order number for a chance to win a $100 GiftCard

    Rate This Product:
    or Create a Review
    (7 Ratings, 5 Reviews) Average Rating:
    ratingratingratingratingrating
    ratingratingratingratingrating
    LANDLORD
    throttle (oklahoma) 11/25/2010 11:36 PM
    FLOWS MUCH BETTER THAN STOCK, AWESOME TURBO WHINE, EASY TO SEE WHY AFTER REMOVING OEM PARTS HUGE AMOUNTS OF RESTRICTION IN OEM TUBE! HOWEVER MOUNTING METAL HOUSING HAS MUCH ROOM FOR IMPROVEMENT, SHOULD RECONFIGURE WITH PUSH IN PINS AT BASE OF BOX, THAT WOULD SLIDE IN TO OEM RUBBER GROMMETS. BOLTS THAT COME WITH IT ARE MORE THAN DOUBLE THE LENGHT YOU NEED, IT IS A HUGE PAIN COMPARED TO WHAT IT SHOULD BE TO MOUNT AIR FILTER HOUSING BOX. TWO PEOPLE AND A AIR RATCHET WILL SAVE TESTING YOUR PATIENCE! RUBBER SLEEVE THAT CONNECTS TUBE TO TURBO HAS DESIGNATED LINES/BARS APPEARS TO BE CUT AT AN ANGLE IT IS NOT! HOWEVER IT WILL SURE APPEAR THAT WAY. IN STEP 9 PER INST.(TIGHTENING THE CLAMP) I SUGGEST YOU SNUG THE CLAMP NOT TIGHTEN IT. I PERSONALLY FOUND IT EASIER TO DROP TUBE INTO ENGINE COMPARTMENT WITHOUT FILTER INSTALLED. AFTER I HAD THE BOOT SLIPPED OVER TURBO I WENT AHEAD AND PUT AIR FILTER ON AND SNUGGED THE CLAMP. AT STEP 12 MAKE SURE BOTH CLAMPS ARE LOOSE HAVE A CREEPER HANDY AND MAKE SURE BOOT IS FLUSH AGAINST TURBO HOUSING FROM UNDERNEATH VEHICLE. AFTER THIS I TIGHTENED BOTH CLAMPS ON BOOT AS WELL AS AIR FILTER BE SURE AND CHECK BOTH SIDES AND FRONT OF FILTER ARE NOT RUBBING AGAINST BOX AND OR LINES I HAVE PURCHASED AND INSTALLED 4"TURBO BACK MBRP EXH. AND QUADZILLA XZILLARAIDER II WHICH I RUN ON 65 HORSE SETTING ALL FROM XDP LIKE DRIVING A COMPLETELY DIFFERENT TRUCK!!!
    ratingratingratingratingrating
    Flow and Turbo wistle
    451Mopar (Denver, CO) 2/15/2009 3:07 AM
    You will hear the turbo with this filter, and it seems to flow and filter well. Have had it for 60,000+ miles. Had to replace the coupler to the turbo as the original got singed during a long grade towing (must have gotten the turbo pretty hot.) Replaced with a higher temp coupler and no problems. Also, made pins from long bolts for mounting filter sheild to battery box. The pins slip in like stock, don't have to try bolting it into place from under the truck like the hardware that comes with the kit.
    ratingratingratingratingrating
    07 mega-cab 2500 cummins
    jason dew (hallsboro, NC) 8/26/2008 10:45 PM
    just like to say that if there is anyone wondering what intake system they should go with? make no mistake about it this afe stage 2 is the best performing and sounds the best of any intake ive ever heard,awesome soung and can here the turbo whistle a mile away,hats off guys awesome product worth every penny dont mind paying for somthing as great as this.oh, im running this with bully dog tripple pup in case u were wondering!
    ratingratingratingratingrating
    AFE stage 2 with Pro-Guard 7
    r3markey (Unknown) 10/24/2006 3:55 PM
    Great intake, it sounds great, flows great and has a huge air filter. It all fit perfect other than the hose going from the turbo to the intske. It was a little off angle but not bad. I'm not completely sure but I think with the stress of being slightly off make the hose split, but I haven't taken it out to see for sure yet, I just put rtv silicone on it to make sure there weren't any leaks. Overall great product and I would buy it again.
    ratingratingratingratingrating
    Big Air
    Anonymous (Unknown) 10/10/2007 11:34 PM
    This thing has to let a lot more air in. Fit great and was easy to install. Good parts and instructions. Be prepared for turbo whistle, much louder then stock.

    Related Products

    AFE 28-10033 Magnum Shield Pre-Filter
    List Price: $37.44
    XDP Price: $28.45
    You Save: $8.99 (24 %)
    ratingratingratingratingrating
    AFE 28-10033 Magnum Shield Pre-Filter
    Size: 8-1/2" to 9"B x 7"T x 9"H
    AFE 90-50001 Air Filter Restore Kit - Aerosol (Blue)
    AFE 90-50001 Air Filter Restore Kit - Aerosol (Blue)
    List Price: $22.44
    XDP Price: $16.16
    You Save: $6.28 (28 %)
    ratingratingratingratingrating
    AFE 90-50001 Air Filter Restore Kit - Aerosol (Blue)
    Used On Pro 5R (5 Layer) Media Blue Filters
    AFE BladeRunner Air Intake Manifold 46-10011
    List Price: $373.75
    XDP Price: $284.05
    You Save: $89.70 (24 %)
    ratingratingratingratingrating
    AFE BladeRunner Air Intake Manifold 46-10011
    2003-2007 Dodge 5.9L Cummins
    AFE Replacement Air-Filter #24-91026 (Standard Media)
    List Price: $111.19
    XDP Price: $80.06
    You Save: $31.13 (28 %)
    AFE Replacement Air-Filter #24-91026 (Standard Media)
    Flange: 6" | B: 9" | T: 7" | L: 9"
    Thermo Tec Cool Tube Heat Shield #14500
    List Price: $57.31
    XDP Price: $45.85
    You Save: $11.46 (20 %)
    ratingratingratingratingrating
    Thermo Tec Cool Tube Heat Shield #14500
    Universal - 2 1/2" to 3 1/2" X 36"