Applied Performance 802-011 Stage 1 Turbocharger
1999.5-2003 Ford 7.3L Powerstroke
Applied Performance Products
The Applied Performance Products 802-011 Stage 1 Replacement Turbocharger is a direct bolt-on that is designed as a true stock replacement for your 99.5-03 Ford 7.3L Powerstroke. Featuring a ported-shroud style compressor housing and a Billet CNC Compressor Wheel, this turbo spools fast and keeps your temperatures down while eliminating turbo bark and compressor surge. Fueling upgrades are recommended to take advantage of the additional airflow supplied by this turbocharger.
This turbo utilizes factory mounting points and retains the factory air control valve for a safe and hassle-free installation. The turbo is equipped with a 62mm inducer and an 92mm exducer which, when combined with the lightweight billet CNC wheel, results in reduced turbo lag and maximum performance and power. These performance upgrade turbos are equipped with a billet aluminum heavy duty adjustable wastegate actuator pre-set at 24psig. The wastegate actuator is a quick-adjust design which eliminates the need to disconnect the actuator from the wastegate valve.
To keep the bark and surge issues under control we have designed this turbo from the groud up to take advantage of the lighter, stronger, billet CNC compressor wheel. For trouble-free operation, the traditional turbine oil seal has been replaced with a step-gap oil seal to minimize oil-burning and build-up on the turbine wheel. Our turbos out-perform the competition with faster spooling, lower EGT's, Higher Max HP Supported, a Step-Gap Oil Seal, a Billet CNC Compressor Wheel with Extended Tip Technology, and much tighter quality control... and no nagging Bark/Surge problem!
- Billet CNC Compressor Wheel
- Extended Tip Compressor Wheel Technology
- Step Gap Oil Seal on Turbine Side
- Quick-Set Wastegate Actuator
- 5-Year Warranty
- Compressor Inducer - 62mm
- Compressor Exducer - 92mm
- Turbine Inducer - 79mm
- Turbine Exducer - 68mm
- Exhaust A/R - 0.84
- Adjustable Wastegate Pre-Set - 24psi
- Extended Tip Compressor Wheel
- Manufactured by Applied Performance Products USA
IMPORTANT EMISSIONS NOTE: This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a ""Race Only"" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.
- Reduced EGT's
- Spools Faster than OE Turbo
- Direct Bolt-In Replacement Turbocharger
Note: Exhaust Backpressure Valve (EBPV) shown in image is not included.
Customer Reviews - Include your order number for a chance to win a $100 GiftCard
3/26/2014 7:54 PM
I purchased the turbo on the recommendation of the XDP salesman and he was right. It's a great value, spools fast, and is definitely made well. I'm glad I purchased it and is a good step towards the end goal of a fast show truck I can still drive everyday.