BD-Power 103036X ProTect 68 68RFE Pressure Control Kit
|BD’s ProTect 68 Trans Pressure Control kit adds 150% more torque holding force to stock transmissions like no others can. Kit includes a new designed valve body separator plate and a Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% more holding force above stock to prevent clutch slippage. All of this without modifying the transmission pump or removing the transmission.
The ProTect 68 Electronic Pressure Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/ engine load. The modules dynamic control ramps up the much larger sweep right up to 250 PSI mainline pressure as needed dependent on engine load which creates turbocharger boost dynamically. This is not accomplished with any other aftermarket engine tuner.
Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A “fresh” stock transmission will have the ability to handle up to 500hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.
- Adds 150% More Torque Holding Force
- Ability To Hold Up To 500HP
Proper transmission identification needs to be determined to select the right kit.
1030360 - 2007.5-2011 68RFE Early Model w/White connector*
1030361 - 2010-2014 68RFE Late Model w/Grey connector*
*2010-2011 model years could have either an early or late model 68RFE transmission which the color of the main connector on the driver’s side of the transmission can determine what model is in the vehicle. The color of the housing connector that protrudes from the valve body/transmission will either be White for early model or Grey for late model.
Customer Reviews - Include your order number for a chance to win a $100 GiftCard