BD-Power P7100 Fuel Stop Plate
|Fuel Stop Plate Part#:||
1994-1998 Dodge 5.9L Cummins
Click FUEL PLATE SPECIFICATIONS to find your part number.
Looking for Big Daddy radical Power? You found it! At least 20 engineers were involved in designing the Fuel Stop Plate and Governor controls. The fuel stop plate controls the fuel quantity of the Bosch P7100 fuel pump that is the heart of the Cummins engine performance. The Governor controls the engine response to load and the maximum engine rpm
It only took 1 engineer to reverse design the BD Fuel Stop Plate. BD offers 6 different ramp designs of the Fuel Stop Plate that result in 30 to 150 hp and 70 to 300 lbs of torque increase and a calibrated boost tube orifice improves your turbo performance.
The Governor kit (new)opens up the engine rpm. Power will control the maximum rpm attainable. If you have power we can reach 3800 rpm. This is not an easy install; you may want to just order an exchange pump after you have determined this is beyond your eyesight and steady hand.
BD suggests a 14 cm turbine housing if you are going beyond the 250-hp level. The increased exhaust flow requires a larger turbine housing and should have a larger exhaust system for peak performance.
We recommend this kit be installed by one of BD’s dealers. It requires opening up the fuel pump and precise setting of the plate to insure the proper adjustment to prevent over fueling and damage to the engine.
Emission testing and certification that meets with California Air Resource Board is constantly being worked on. We do offer products that have CARB certification and others that are for RACE only. Please advise us of your needs.
Additional InformationInstall Sheet
Customer Reviews - Include your order number for a chance to win a $100 GiftCard
#6 fuel plate
12/3/2011 4:00 PM
Put the #6 plate in my 97 cummins. Great power, hits 34 lbs of boost. Will make the stock auto tansmission slip though if pushed hard.
10/7/2009 11:00 PM
96 Dodge 12 valve with the #10 plate is awesome but pay attention when it says factory clutch wont hold the power lol
number 11 plate
11/28/2007 5:59 PM
i have a 97 2500 and i put the number 11 plate in and it brought my truck from 215 to 280hp 660ft. i very happy with the product.