BD-Power TrackMaster Turbo 1045600
|BD has a long history of working in cooperation with Borg Warner in designing turbochargers that have changed the face of the marketplace and are now common place with most Diesel aftermarket performance kits.
With BD's Track Master series of turbo, matching a unit to your competition diesel is easy with a variety of BD compressor housing and Borg Warner cartridge/turbine combinations.
The Borg Warner non-waste gated, low cost dual volute turbine housings with A/R ratios ranging from 0.90 to 1.25 can easily be changed out to match your engine rpm and find the sweet spot of low drive pressure and peak boost level.
With BD's compressor housing, larger is not better — some other competition turbo's on the market use larger outlets and piping which reduces transient response and available power. BD's smaller outlet retains air velocity at the most desirable speed of 240-350 ft/sec at high C.F.M. flow. The BD compressor housing has a 5-inch inlet hose connection for easier attachment to air filter while other require reducers to neck down and make fit.
With four different configurations of compressor wheel inducer sizes available ranging from 71.1mm to as large as 82.2mm, these housings also have an external commitment ring built in for added strength and protection. The compressor flow has been matched for the noted engine
power levels. To reduce big turbo lag and prevent poor spool up time,
add BD's Race Turbine Diverter Valve for the ultimate off-the-line
Universal T4 turbochargers may require additional parts and fabrication for intake connections and exhaust plumbing. T4 exhaust manifold or adapter required. BD-Power Hardware Kit 1405610 required for assembly of turbocharger.
- CW Inducer: 71.08MM
- CW Exducer: 100.2MM
- TW Inducer: 83.47MM
- TW Exducer: 74.29MM
- C.F.M: 1378
- Lbs./Min: 95
- HP Range: 600-700