BD-Power TrackMaster Turbo 1045610
has a long history of working in cooperation with Borg Warner in
designing turbochargers that have changed the face of the marketplace
and are now common place with most Diesel aftermarket performance kits.
With BD's Track Master series of turbo, matching a unit to your
competition diesel is easy with a variety of BD compressor housing and
Borg Warner cartridge/turbine combinations.
The Borg Warner non-waste gated, low cost dual volute turbine
housings with A/R ratios ranging from 0.90 to 1.25 can easily be changed
out to match your engine rpm and find the sweet spot of low drive
pressure and peak boost level.
With BD's compressor housing, larger is not better — some other
competition turbo's on the market use larger outlets and piping which
reduces transient response and available power. BD's smaller outlet
retains air velocity at the most desirable speed of 240-350 ft/sec at
high C.F.M. flow. The BD compressor housing has a 5-inch inlet hose
connection for easier attachment to air filter while other require
reducers to neck down and make fit.
With four different configurations of compressor wheel inducer sizes
available ranging from 71.1mm to as large as 82.2mm, these housings
also have an external commitment ring built in for added strength and
protection. The compressor flow has been matched for the noted engine
power levels. To reduce big turbo lag and prevent poor spool up time,
add BD's Race Turbine Diverter Valve for the ultimate off-the-line
T4 turbochargers may require additional parts and fabrication for
intake connections and exhaust plumbing. T4 exhaust manifold or adapter
required. BD-Power Hardware Kit 1405610 required for assembly of turbocharger.
- CW Inducer: 80.30MM
- CW Exducer: 109.7MM
- TW Inducer: 87.37MM
- TW Exducer: 81.74MM
- C.F.M: 1740
- Lbs./Min: 121
- HP Range: 900-1000