Fleece FPE-CCBT Crankshaft Barring Tool
Manufacturer: Fleece Performance
Mfg. Number: FPE-CCBT
XDP Part Number: FPE-CCBT
|The Fleece FPE-CCBT Crankshaft Barring Tool allows you to turn your 89-13 Dodge 5.9L & 6.7L Cummins over with ease. A new design that is much easier to use than the barring tool that interfaces with the flywheel housing and starter ring gear. To install, simply remove the 4 bolts holding the damper, install this tool, re-install the bolts and torque to spec. You'll never back a bolt out of the damper when trying to reach TDC and overshoot.
They are especially useful when removing and reinstalling a transmission. No need to use a pry bar on the starter ring gear to rotate the enter to R&R converter bolts.
- Built From 1018 Steel
- Accepts 1/2" Drive Ratchet
- No Need To Remove Once Installed
- Works w/ Factory Crank Bolts & Roll Pins
- Fits Vibratech Fluidampr & Factory Dampers
- Electorless Nickel Plated For Corrosion Resistance
Make barring easy
9/5/2014 1:27 AM
If your gonna install a cam, adjust your lash this tool makes it a permanent breeze. For a few dollars more than the Cummins barring tool you can mark your balancer and oil pan and rotate the engine with ease and hit the same mark every time and not run circles from the balancer to the flywheel using the Cummins tool.