Mishimoto MMINT-DMAX-02K Intercooler & Pipe Kit
List Price: $1,415.00
XDP Price: $1,273.50
You Save: $141.50 (10 %)
2002-2004 GM 6.6L Duramax LB7
|Fed up with high EGTs and an intercooler setup that isn’t keeping up with the demands of your Duramax? The solution is finally here with the Mishimoto Chevrolet/GMC 6.6L Duramax intercooler kit! This kit includes everything you need to improve airflow, substantially decrease air-charge temperatures, and support your truck at any power level. The first key component is the Mishimoto intercooler piping. Our engineers have maximized airflow by eliminating restrictive bends, resulting in a smooth and unimpeded airflow. The piping is constructed of mandrel bent aluminum polished to a flawless finish. For efficient holding power this kit includes Mishimoto silicone boots with DuraCore™ technology and constant-tension T-bolt clamps. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.
This package is rounded out with the Mishimoto intercooler featuring cast aluminum end tanks and a bar-and-plate core, all designed to allow for cool, dense air to your engine. The Mishimoto Duramax intercooler features greater core volume than the factory cooler; this provides reduced air-charge temperatures and EGTs. All the components in this kit are engineered to last, just like your truck. Offered with either a black or silver core, the Mishimoto 6.6L Duramax intercooler kit is protected by our signature lifetime warranty.
- High Quality Aluminum
- Increased Power & Cooling Efficiency
- 3.0" Polished Aluminum Intercooler Pipes
- Construction: Bar/Plate
- Overall Size: 45.6” x 23.4” x 8.2”
- Core Size: 38.27" x 18.86"
- Inlet: 3.00” (76mm)
- Outlet: 3.00” (76mm)
- Core Thickness: 2.05"
- Tank Wall Thickness: 4mm
Silicone Boots with DuraCore:
- Boot 1: 2.30”, 3.00”
- Boot 2: 2.30”, 3.00”
- Boot 3: 3.00”
- Boot 4: 3.00”
Constant Tension T-Bolt Clamps:
- (2) 2.75” Constant Tension T-Bolt Clamps
- (6) 3.25” Constant Tension T-Bolt Clamps
(2) Aluminum Intercooler Pipes
(4) Silicone Boots with DuraCore™ Technology
(8) Constant Tension T-Bolt Clamps
(2) Aluminum Mishimoto M Logo Badges
Limited Lifetime Warranty
Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.
A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.
MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.
Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
For all warranty claims, please contact Mishimoto.
Customer Reviews - Include your order number for a chance to win a $100 GiftCard