|
|
|
|
|
Shop By Diesel
|
|
|
|
|
|
Shop By Brand
| | |
|
| |
| | |
|
|
|
|
|
|
PureFlow AirDog 150 Air/Fuel Separation System "Quick Connect" Cummins
|
|
List Price: $632.00
Our Price: $590.00
You Save: $42.00 (7 %)
Manufacturer: AirDog by PureFlow
Application: 89-12 Dodge 5.9L & 6.7L Cummins (moderate to extreme engines)
Product Options
| |
|
Reliability and Performance! Two powerful reasons to add an AirDog to your diesel pickup! The AirDog provides the proper pressure/flow of fuel to your diesel engine under virtually all operating conditions for PEAK EFFICIENCY with CONSISTENT and MAXIMUM POWER OUTPUT!
The compact AirDog provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog replaces the Cummins factory lift pump and filter system, and enhances the fuel delivery to the Powerstroke and Duramax with a commercial duty system.

Your High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion.
The AirDog eliminates the air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!

-
NEW Quick Connect / Dis-Connect Fittings - Drops Installation Time 30-45 Minutes!
-
Most Compact System Available for the Pickup Truck. Only 7” L x 3.2” W x 10” H
-
For Moderate to Extreme Engines!
-
High Efficiency, Long Life Gerotor Fuel Pump
-
Lower Cost Replacement Filters
-
3 and 5 Micon AirDog Fuel Filters Available *Stratapore Inside
-
Relay Controlled Wiring Harness
-
Low Fuel Pressure Warning Light Available
-
Includes Wire Screen Water Separator
-
LIFETIME LIMITED EXPRESS WARRANTY
-
Fuel Preporator Model Sizes Available for Diesel Engines to 14,200 cubic inches and Larger
|
The 'BEFORE' spray pattern picture, shows graphically the effect of air/vapor in delaying the pressure buildup
|
|
The 'AFTER' picture, with processed fuel from the Fuel Preporator®, represents how each and every spray pattern could and should be!
|
|
List Price: $27.00
Our Price: $23.00
You Save: $4.00 (15 %)
For use on AirDog Air/Fuel Separation Systems
|
List Price: $32.00
Our Price: $26.00
You Save: $6.00 (19 %)
For use on AirDog Air/Fuel Separation Systems
|
List Price: $76.70
Our Price: $59.00
You Save: $17.70 (23 %)
For use with all Airdog systems
|
List Price: $56.95
Our Price: $44.95
You Save: $12.00 (21 %)
03-07 Dodge 5.9L Cummins
|
Universal - 1/2" Push-Lock Fitting
|
List Price: $195.00
Our Price: $164.95
You Save: $30.05 (15 %)
Universal - Most Diesel Fuel Tanks (Cutting Required)
|
List Price: $1,150.00
Our Price: 975.00 On-Sale!
98.5-02 Dodge 5.9L Cummins
| | |
Product Reviews
| (133 Ratings, 19 Reviews) |
Average Rating:
|
air dog 150
Jake
(pa)
1/7/2013 10:19 PM
installing the air dog was a fairly easy thing todo except that the dip tube was a challenge as far as dropping the tank and re instaling it i love the pump but the fuel line going to the vp poped off while i was driving and ran the truck out of fuel the fittings make the instal quicker but honestly are crap
|
03 cummins
ralf
(mn)
5/21/2012 8:00 PM
Easy to install works good but it is alittle loud
|
01 cummins Quarter tank issues
Derek
(New york)
1/24/2012 12:35 PM
I dont understand why with this new fuel system i keep running out at a quarter tank if i new this i would have never purchased this product real disappointing they dont tell you that in the overview with my stock lift pump i was able to go below the E line even on hill very disappointed with air dogs work they say the same stuff happens with fass
|
easy as pie
got the mod bug
(va)
3/13/2011 2:57 PM
AMAZING...thats all i can say. took roughly 3 hours to install. this kit has everything you need, just boltt on, plug into your ecm, provide a ground and power, slpice the filler neck and BOOM...done. i think the thing that took the longest was bleeding the fuel system when everything was installed.
|
A+++ product
mike
(nashville)
10/1/2010 11:17 AM
Finally got a chance to get my pump on this weekend and couldn't be happier. I was a little worried about the install after reading some of the reviews about the long bed and short bed trucks using different brackets but i didn't have one issue getting mine on. They even go as far to say in the install sheet where to mount it if you do have a short bed Thanks Pureflow and XDP!! now i can run my Edge on lvl 5 without worrying about my VP44 crapping out on me again.
|
|
|