PureFlow Raptor RP-100 Fuel Pump (100 GPH) "Quick Connect"

Just Installed the Lift pump last night. Lucky for me the stock lift pump was still on the side of the block. Install wasnt to bad. Didnt have to lift the bed or drop the tank. Managed to squeeze my arm up there and get the lines on and off. Great pump for the price.

The install went pretty smooth, hardest part was having to lift the bed to install the draw straw V in the fuel canister due to having an in-tank pump. After the install I was having fuel pressure flucuation issues. Pump would average 17 idle, 15 driving but would have erratic fuel pressure that would drop to 0 go to 5 back to 0 then shoot up to 10 then sit at 15. After talking with Kyle at Pureflow he sent me a replacement pump. The day UPS delivered the pump, the pump died on my wife and left her on the side of the road. I don't know what caused the pump to die but it didn't blow the fuse in the harness. I put the new replacement pump Pureflow sent me and after driving 10 miles it's acting up again but it seems worse. I don't know what to do now, but I wouldn't suggest this pump to anyone. Maybe it's getting air in the lines, but I've checked them so many times and it did it with a full tank. Maybe it's to much pump for the ECM (OEM lift pump)I'm actually considering running a Holley Black pump now.

a great buy for the money

So far, great pump for the money. Pressure stays around 17-18 @ idle, and only drops to round 13-14 under heavy load. Easy to install in your own garage even if you have just average mechanical skills.

Strong little pump. Install instructions could have been clearer, but preformance wise, there is now no delay from when you turn the key to the engine starting up. Unlike the stock OEM lift pump in the tank. ('05 dodge) Too bad they didn't sell the truck with these pumps on them already!