Pusher 24VSWCA Intake Manifold & Cross-Air
Mfg. Number: 24VSWCA
XDP Part Number: PU24VSWCA
* denotes required field
Number of Ports*
|The Pusher 24VSWCA Intake Manifold & Cross-Air for your 03-07 Dodge 5.9L Cummins taps into existing ports, one at the front and rear of the intake plenum. By splitting off the driver-side intercooler tube and creating two parallel paths of air flow in addition to the stock plumbing, cylinders 1, 5, and 6 can be better supplied with air. Built from all TIG welded, 3” mandrel bent tubing, with laser cut 1/2" flange and 1/4" dipstick mount. All intake manifolds come standard with two 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc. This is a complete kit that includes instructions, heavy duty 4-ply silicone couplers, stainless T-bolt clamps, a factory Cummins gasket, factory Cummins bolts, and port plugs for a quality install.
- Constructed of mandrel bent tubing.
- Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
- Significant drop in EGT's due to better equalized airflow to cylinders 1, 5, and 6.
- Fuel mileage increase
- Increased throttle response
- Faster turbo spool-up
kit is not compatible with the APPS mounted in the stock location on
2003-2005 trucks. You must relocate or purchase the Pusher APPS
relocation bracket to use the Cross-Air on trucks equipped with a APPS.
6/15/2014 6:39 PM
install was a breeze looks great and gained about 3mpg, boost dropped 16psi but that is what happens when flow is seriously increased and turbo is stock truck spools super fast and i can only smoke out 2 lanes of traffic instead of 4 truck is faster than before and new turbo is in the works. this product is worth the price and build quality is very professional if i had a 2nd truck i would defiantly buy this intake again.