Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Part #: AFE46-60060-MA

AFE 46-60060-MA BladeRunner Street Series Turbo & Exhaust Manifold

1994-1998 Dodge 5.9L Cummins
Part #: AFE46-60060-MA
$1,187.50
Quickships by next business day
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The AFE 46-60060-MA BladeRunner Street Series Turbo & Exhaust Manifold for your 1994-1998 Dodge 5.9L Cummins is an all-in-one kit for replacing your turbo and exhaust manifold. This stock replacement turbo requires no additional fueling and has been dyno tested and proven to increase performance.

Direct Replacement:
This turbo & manifold kit can be installed on 1994-1998 model years as a direct, bolt-on replacement. All connections to the vehicle are compatible with the OE geometry, resulting in a quick and reliable connection. 

Compressor:
The housing utilizes OE inlet and outlet. A wastegate actuator is mounted to the integrated cast bracket and comes preset to factory setting.

One-Piece Construction:
This manifold is constructed of durable cast ductile iron with a reinforcing rib for maximum strength between the wall flanges at the ports.

Dual Auxiliary Ports:
Two Exhaust Gas Temperature (EGT) probe ports are supplied for easy installation of gauges or testing equipment. 

Hassle-Free Installation:
Hardware and gaskets are included for a hassle-free installation.

Turbo Features: 

  • Pre-Set Wastegate Actuator 
  • Dyno Tested To Produce +4HP & +12 Ft-lbs.
  • Stock Replacement, No Additional Fueling Required 
  • Bolt-On Replacement - All Connections Are Compatible To OE Geometry 
  • 2-Year Warranty

Turbo Specifications:

  • Compressor Inducer - 54 mm
  • Compressor Exducer - 76 mm / Trim: 50
  • Turbine Inducer - 65 mm
  • Turbine Exducer - 58 / Trim: 80 mm
  • Turbine Housing: 12  cm2

Exhaust Manifold Features: 

  • Outflows Factory Exhaust Manifold By 50% 
  • Improves Performance & Throttle Response 
  • Cast Ductile Iron Construction 
  • Thick Walled Flange Design For Increased Strength 
  • Matched Ports & Merged Runner Design Reduces Backpressure 
  • Dual 1/8" NPT Pre-Drilled & Tapped Exhaust Gas Temperature (EGT)

Specifications

  • MFG. Number 46-60060-MA
  • Manufacturer Name AFE
  • Shipping Weight 53.00 lb.
  • Shipping Length 28 in.
  • Shipping Width 18 in.
  • Shipping Height 12 in.
  • UPC 802959464069

Reviews

Be the first to rate this item!

Write Review

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

will this turbo work with my 98 12v manual cummins? is the waist gate on the turbo set up the same for auto transmissions and manual transmissions ? i have a manual and my stock set up looks slightly different.
View Staff Answer 
Answer

The AFE 46-60060-MA BLADERUNNER STREET SERIES TURBO & EXHAUST MANIFOLD will fit all 1994-1998 Dodge 5.9L Cummins regardless of the transmission type (automatic or manual).

Is this an upgrade from the factory turbo I have a banks big head waste gate on my factory turbo would this give me any gain
View Staff Answer 
Answer

The AFE 46-60060-MA BLADERUNNER STREET SERIES TURBO & EXHAUST MANIFOLD will be a bolt on stock replacement turbo and exhaust manifold for a 1994-1998 Dodge 5.9L Cummins.

Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.