Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
Part #: AFE46-60060-MB

AFE 46-60060-MB BladeRunner Street Series Turbo & Exhaust Manifold

1998.5-2002 Dodge 5.9L Cummins
Part #: AFE46-60060-MB
Our Recommendations Compatible Products
Scroll to View More


The AFE 46-60060-MB BladeRunner Street Series Turbo & Exhaust Manifold for your 1998.5-2002 Dodge 5.9L Cummins is an all-in-one kit for replacing your turbo and exhaust manifold. This stock replacement turbo requires no additional fueling and has been dyno tested and proven to increase performance.

Direct Replacement:
This turbo manifold kit can be installed on 1998.5-2002 model years as a direct, bolt-on replacement. All connections to the vehicle are compatible with the OE geometry, resulting in a quick and reliable connection. 

The housing utilizes OE inlet and outlet. A wastegate actuator is mounted to the integrated cast bracket and comes preset to factory setting.

One-Piece Construction:
This manifold is constructed of durable cast ductile iron with a reinforcing rib for maximum strength between the wall flanges at the ports. 

Dual Auxiliary Ports:
Two Exhaust Gas Temperature (EGT) probe ports are supplied for easy installation of gauges or testing equipment.

Hassle-Free Installation:
Hardware and gaskets are included for a hassle-free installation.

Turbo Features: 

  • Pre-Set Wastegate Actuator 
  • Dyno Tested To Produce +4HP & +12 Ft-lbs.
  • Stock Replacement, No Additional Fueling Required 
  • Bolt-On Replacement - All Connections Are Compatible To OE Geometry 
  • 2-Year Warranty

Turbo Specifications:

  • Compressor Inducer - 54 mm
  • Compressor Exducer - 76 mm / Trim: 50
  • Turbine Inducer - 65 mm
  • Turbine Exducer - 58 / Trim: 80 mm
  • Turbine Housing: 12  cm2

Exhaust Manifold Features: 

  • Outflows Factory Exhaust Manifold By 50%
  • Improves Performance & Throttle Response 
  • Cast Ductile Iron Construction
  • Thick Walled Flange Design For Increased Strength 
  • Matched Ports & Merged Runner Design Reduces Backpressure 
  • Dual 1/8" NPT Exhaust Gas Temperature (EGT) Ports Are Supplied
Note: Replacement exhaust manifold bolts not included.


  • MFG. Number46-60060-MB
  • Manufacturer NameAFE
  • Shipping Weight53.00 lb.
  • Shipping Length28 in.
  • Shipping Width18 in.
  • Shipping Height12 in.


Be the first to rate this item!

Write Review

Customer Photos

Customer Photos

See what others built Submit your photo

Submit a photo for this product and get a $10 XDP Gift Card for approved images the entire month of February - Limit one per customer. Ends 2/28.

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

What is the Wastegate pre set at?
View Staff Answer 

The AFE 46-60060-MB BLADERUNNER STREET SERIES TURBO & EXHAUST MANIFOLD will be set to approximately 17-19 pounds of boost pressure on a stock 2 nd generation 24V Cummins.

Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.