A true direct replacement turbo, this aFe BladeRunner turbocharger supports up to 500HP while lowering Exhaust Gas Temperatures (E.G.T.).
Turbine: High silicone ductile iron casting with internal wastegate. To lower Exhaust Gas Temperatures (EGT's), the turbine outlet is 4.0"" compared to the OE 3.0"" outlet. The CNC machined wastegate actuator is set to 40 PSI. The inducer and exducer measure 74mm and 64mm respectively.
Compressor: The housing is cast from A356 T6 aluminum and incorporates a ported shroud to eliminate turbo bark and compressor surge. The wastegate actuator mounts to a bracket cast into the housing. The inducer and exducer measure 58mm and 76mm respectively.
Direct Replacement: A cast ductile iron turbine outlet allows this turbo to bolt up to the stock exhaust system on both the 12V and early 24V engines with no modifications. The turbine outlet is machined to accept an EGT thermocouple to monitor temperatures. All necessary gaskets and clamps are included for a trouble free installation. For extreme flow the 4" AFE 46-60066 down pipe can be used in place of the cast elbow.