Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Part #:

AFE 46-7006X Deep Transmission Pan

2007.5-2012 Dodge 6.7L Cummins
Part #:
  1 Review
FROM 270.75
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More
  1 Review

Description

The AFE 46-7006X Deep Transmission Pan brings performance engineering to the 68RFE transmission in your 07.5-12 Dodge 6.7L Cummins. The AFE Deep Pan adds an additional 3-4 quarts over your factory fill. In addition to the added fluid capacity, the pan is equipped with a magnetic drain plug and 1/8" NPT Port for a temperature sensor. Featuring Built-in internal and external fins that transfer heat from the fluid to the outside air for maximum cooling. Built from durable die-cast A380 aluminum with reinforced ribs and a wrinkle black powder-coated finish w/ machined fins for maximum strength and styling. This cover fits the 68RFE transmission and is supplied with silicone for a leak-free seal. No modification to the dipstick is needed. Not for use on Cab & Chassis trucks.

Features:
  • 3-4 Quarts Over Stock
  • Internal & External Cooling Fins
  • Built-In 1/8 NPT Port For Temp. Gauge
  • Magnetic Drain Plug Catches Fine Particles
Notice: The internal spin-on filter and flat pick-up filter screen is not included. These are dealer items.

Color Options:
46-70062 - Machined (non-coated) fins.
46-70061 - Black (coated) fins.

46-70060 - Raw finish

Specifications

  • Manufacturer Name AFE
  • Shipping Weight 16.00 lb.
  • Shipping Length 22 in.
  • Shipping Width 17 in.
  • Shipping Height 8 in.
  • Warranty Yes
  • Warranty Info Limited Lifetime
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

Ok for the price, not well thought out.
Chris Robertson
Location: Norfolk, VA
The quality of the pan appears to be ok so far, the pan does need to be cleaned before installation as there were scraps of aluminum in the valleys between the fins. The threads on the drain plug are very rough and require pipe threading to hold a seal. One other issue with the pan is the placement of the temperature sender hole. it is placed at the back of the pan which gives it less than an inch between the pan and the crossmember on the frame. After emailing AFE it was recommended that I go to the hardware store and buy adapters to relocate the positioning of the temp sender.

Include Your Order Number For a Chance to Win a $100 Gift card

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

What size bolts are used for the pan? I'm missing one
View Staff Answer 
Answer

The AFE Socket Head Cap Screws are – 6 x 1 x 20

If you missing any items for your kit please contact XDP with your order # and we'll work with AFE to get you replacements. 1-888-DIESEL-4

Instead of using silicon can you use a gasket with this pan?
View Staff Answer 
Answer

AFE recommends only using the supplied silicone with their AFE 46-70062 Deep Transmission Pan.