Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 331.3
Part #: AFE54-30392

AFE Stage 2 Cold Air Intake System Type Cx 54-30392

2003-2007 Ford 6.0L Powerstroke
Part #: AFE54-30392
★★★★★ ★★★★★ 3 Reviews
Buy now, pay later using Affirm Logo during checkout.
Our Recommendations Compatible Products
Scroll to View More



  • Increases horsepower & torque.
  • Maximizes airflow for better acceleration and responsiveness
  • Improved performance results in greater fuel efficiency
  • Installs in less than 60 minutes using factory mounting points
  • No cutting or drilling to engine compartment is required
  • Replaces OE air filter with high flow high performance 360 degree radial flow air filter
  • Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed
  • Replaces factory air box with a heat-blocking shield that seals to the hood
  • Limited lifetime warranty

  • Product Specifications:

    Airflow Increase


    Replacement Filter

    • 24-90037 (Standard)

    • 72-90037 (Pro-guard7)


    • TBA

    Box Dimensions

    18 X 16 X 12"

    Shipping Weight

    14 pounds

  • Vehicle Applications

    2003 Ford 6.0L Powerstroke
    2004 Ford 6.0L Powerstroke
    2005 Ford 6.0L Powerstroke
    2006 Ford 6.0L Powerstroke
    2007 Ford 6.0L Powerstroke


    • MFG. Number 54-30392
    • Manufacturer Name AFE
    • Shipping Weight 16.00 lb.
    • Shipping Length 13 in.
    • Shipping Width 13 in.
    • Shipping Height 17 in.
    • Fuel Type Diesel
    • E-Code 2
    • EO Number d-550-4
    • Filter Media Oiled
    • Filter Type Washable & Reusable
    • Intake Style Open Air Box
    • UPC 802959501801
    • Warranty Yes
    • Warranty Info 2 Year Limited
    • Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm -
    • Internal L1.00R0.00


    ★★★★★ ★★★★★
    5.0/5 Stars out of 3 Reviews
    06 6.0
    Love this air intake system! Easy to install, and turbo sounds great! XDP has great products, that ships quickly! I will definitely be buying more products!
    I love this air intake system. i just installed it today and i can already see a difference in the performance of my truck. The exhaust even sounds different. There is a lot air noise but its all good in my eyes. If you have a 6.0 you MUST get this intake. Thanks for selling a great product
    06 6.0 PSD
    Great Kit! Was able to install kit in 30 minutes. Love the sound of the turbo after kit was put on. Going to recommend this kit to all that are looking for a good priced and easy to put on kit. And when I placed my order the sales person at XDP was very helpful with other questions I had. Looking forward to doing more business with XDP. Thanks

    Write a Review

    Include Your Order Number For a Chance to Win a $100 Gift card

    Overall Rating

    Your Information

    Email Address will not be made public.

    Questions and Answers

    How do you clean the filter?
    View Staff Answer 

    Before you start to clean the filter, determine whether you have an oiled or oil-free filter. Also have the appropriate cleaning kit for your filter: #90-50500 for gold, #90-50501 for blue and #90-59999 for oil-free.

    Follow the steps below.

    1) Use a soft bristle brush like a paint brush to remove large chunks of debris and dirt from between the pleats. GENTLY TAPPING the filter on the ground to remove any loose dirt being careful not to bend any of the pleats.

    2) Spray the cleaning solution that comes in our Restore Kit, on the dirty side of the filter. Let the cleaning solution soak in for about 10 minutes.

    3) Rinse the filter from the clean side of the filter to the dirty side. Repeat spraying and rinsing until the water is clear. Since media will be stained, it will not be completely white and may still appear dirty.

    4) DO NOT USE A HIGH PRESSURE WATER NOZZLE when rinsing the filter.

    5) Let the filter air-dry. DO NOT USE COMPRESSED AIR TO DRY THE FILTER! It may take a couple of hours for a Pro DryS to 12 to 24 hours for a Pro5R depending on humidity and temperature.

    6) If you have an oil-free Pro Dry-S filter, the cleaning process is completed and the rest of these instructions can be disregarded.

    7) After the filter is dry, apply small amount of oil on the top of each pleat. It is not necessary to apply oil down in between the pleats. It is also a good idea to not apply oil all the way to the urethane. Leave about an inch of media un-colored. DO NOT DROWN THE FILTER WITH OIL! The oil will wick out a great deal.

    8) Leave the oiled filter for 8 to 12 hours to allow the oil to fully wick.

    9) Spot apply oil to areas that still do not have "color" to it.

    Ask a question about this product

    Please allow up to 1 business day for reply.

    More to Consider

    Recently Viewed