USD 599

Installation Instructions

Part #: PTA4SPBD002

AirDog A4SPBD002 100GPH Air/Fuel Separation System

2005-2018 Dodge 5.9L/6.7L Cummins (Stock to Moderate)

Part #: PTA4SPBD002

★★★★★ ★★★★★ 10 Reviews

$ $599.00

In-Stock

Our Recommendations Compatible Products

Part #: {{:: (product.sku == undefined) ? product.code : product.sku }}

View Details

Installation Instructions

Authorized Dealer

The PureFlow AirDog A4SPBD002 100GPH Air/Fuel Separation System for your 2005-2018 Dodge 5.9L/6.7L Cummins provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.

Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!

The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.

Features:

100 GPH @ 15-17 PSI (Stock-500HP)
Removes Air & Water From Fuel
Increased Horsepower & Torque
Optimized Engine Performance
Improved Throttle Response
Increased Fuel Economy
Lifetime Limited Express Warranty

CA Residents: CARB E.O. Number on file - LEGAL for use in California.

MFG. Number A4SPBD002
Manufacturer Name AirDog by PureFlow
Shipping Weight 27.00 lb.
Shipping Length 19 in.
Shipping Width 13 in.
Shipping Height 7 in.
Fuel Type Diesel
EO Number D-595-3
UPC 813094015023
Warranty Yes
Warranty Info Limited Lifetime Express

★★★★★ ★★★★★

4.10/5 Stars out of 10 Reviews

5 ★

4 ★

3 ★

2 ★

1 ★

★ ★ ★ ★ ★ 5

other brother (Washington st) | September 10th, 2008

This thing is worth every penny! It gave me a huge increase in power & actually allows me to run my edge tuner at levels 4 & 5. Previous to this pump the high power tuner levels made no differance in power, but now she throws you back in the seat! I'll probably be shopping for a new clutch here soon. I actually did get an increase in econimy out of it as well (when I'm not romping on it). My idle is rock solid when it used to fluctuate up & down. During extended low speed driving while scouting / road hunting in the mountains I got an honest 2 to 3 mpg increase! Pretty easy to install except for the fuel tank pickup tube. Rather difficult to remove & re-install the 34 gal tank by yourself on my 05 2500 but it can be done. Great product!!

Great product!

★ ★ ★ ★ 4

PD (brenham, Tx) | November 15th, 2008

very compact and fits well on my 2002 dodge. Engine starts up exremely smooth and runs smoother as well. With a comp and 150 injectors, it definatly makes a difference. Only problem was that the wrong fuel tank inlet was sent, and I had to manufacture my own. other than that... excellent product, definatly recomend it if willing to spend the money.

fitter

★ ★ ★ ★ 4

RH (fogelsville pa) | August 1st, 2009

I just installed my Air Dog FP 100 today. The installation was fairly easy. The instructions for installation does not inform you that if you have already replaced your original lift pump with the factory retrofit in tank pump,you must drop your tank and remove the pump and install a steel or copper tube to the bottom of the tank for fuel pick-up.the only other problem I found is the wiring harness that comes with the kit is not vehicle specific and I had to cut and alter the locations of the plugs.Other than that I thik it is a great product and the best bang for the buck. I changed the spring for the fuel pressure to 17psi and it maintains that and does not drop. Oh yea the fittings are made in CHINA

Pages 1 2 3 4

Customer Photos

See what others built Submit your photo

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Does this replace the stock lift pump either engine compartment mounted or in-tank (2004 Dodge 5.9) I want a system to replace the stock lift pump and filter system

View Staff Answer

Answer

Yes, your stock lift pump and fuel filter will be replaced regardless of you stock lift pump location.

Is this a good apliction to replace the factory lift pump? Where does this unit mount and is this a complete kit with fittings?

View Staff Answer

Answer

The PureFlow AirDog 100 Air/Fuel Separation System is a great replacement of your factory lift pump. The pump is mounted to your frame rail with the supplied mounting hardware and ships complete with a full installation kit. For more information, give our Diesel Experts a call at 1-888-DIESEL4!

Can I remove my stock fuel filter or should I leave it in?

View Staff Answer

Answer

You stock fuel filter can be left as a secondary filter or removed completely.