Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 423.94
Part #: ATS2029013228

ATS 2029013228 Ported Compressor Housing

1999.5-2003 Ford 7.3L Powerstroke
Part #: ATS2029013228
★★★★★ ★★★★★ 16 Reviews
$ $423.94
In-Stock
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description



The ATS 2029013228 Ported Compressor Housing is designed to increase turbo life in your 99.5-03 Ford 7.3L Powerstroke by eliminating the damaging effect of compressor surge. Offering significant advantages beyond a replacement compressor wheel, this upgraded housing with the factory wheel actually flows more than the popular compressor wheel replacements.

Anyone who has ever towed with a 99.5-03 Powerstroke has undoubtedly experienced compressor surge and flutter which occurs between 1800-2200 rpm. When performance products are added to increase horsepower, the compressor wheel accelerates faster and compressor surge and flutter becomes more apparent and damaging Another great benefit of the ATS Ported Shroud is a quieter ride. An opening wastegate, a bad torque converter, or a loose cover plate are a few of the excuses which people mistake for the compressor surge noise. Forget about it...with the ATS Ported Compressor Housing.

Features:

  • Enlarged 4" Inlet
  • 4" Upgraded Intake Boot
  • Increased Turbo Life
  • Smoother Exit Airflow
  • Increased Efficiency & Performance
Note: This ATS Compressor Housing comes in a RAW cast aluminum finish.

Specifications

  • MFG. Number 2029013228
  • Manufacturer Name ATS Diesel
  • Shipping Weight 9.00 lb.
  • Shipping Length 13 in.
  • Shipping Width 7 in.
  • Shipping Height 17 in.
  • Fuel Type Diesel
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

★★★★★ ★★★★★
4.7/5 Stars out of 16 Reviews
5
13
4
2
3
0
2
1
1
0
shroud
4
adam (colorado) | April 1st, 2011
Awesome product love the whistle and I don't lose my boost when I'm pulling heavy loads
Big Whistle
5
Chad (Tucson, AZ) | June 19th, 2011
My 7.3L Excursion has upgraded exhaust, tuning, and intake which combined into a horrible turbo surge when it shifts between gears. I installed both the ATS ported shroud and the X-Wheel compressor wheel at the same time. Though these products may not give you much added HP, you definitely will feel a difference in acceleration by eleiminating the surge between gears. I knew there would be a whistle with these products, but it is much louder than I expected...sounds like a jet. It was a bit annoying at first but now I'm used to it and kinda like it. I also recommend having the turbo rebuilt at the same time. Mine had a ton of carbon builup which got into the bearing when removing the old compressor wheel...big mess! (obviously this won't be a problem if you only change the housing).
AWSOME!!!!
5
Jeff (Arkansas) | September 18th, 2011
99.5 F-250 Powerstroke 4x4 with 334,000 miles. I installed the ATS housing and XDP compressr wheel the whistle is incredibly loud and the turbo spools up alot faster. Costumer service was awsome and install took a little longer because I did mine in a barn and did not have an impact wrench so I had to pool the whole turbo off to get the stock wheel off. If you have a impact wrench install will be very easy and should only take about 2 hours. Thanks XDP awsome product best sounding 600$ ever spent.
Pages 2   3   4   5   6

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Dose this come with the 4'' compressor housing boot?
View Staff Answer 
Answer
The 4' boot is also included with the housing.
I all ready fitted a new gt38 garret turbo. I need to pick up at a lower rpm. Does this fit the turbo?
View Staff Answer 
Answer

The ATS 2029013228 Ported Compressor Housing will only fit the factory Garrett turbo.

Do you offer this for the early 99 powerstroke?
View Staff Answer 
Answer

No, we do not offer the ATS 2029013228 Ported Compressor Housing for the early 99 applications because they typically do not have the compressor surge issues like the 99.5-03 applications.

how much power will this make on stock turbo
View Staff Answer 
Answer

Most items such as this are not physically “rated” at any HP levels from the manufacturer. To best answer your question we request that more personalized questions requiring further details on a person’s application be directed to one of our Diesel Experts. Experts are available via E-mail (), Phone (1-888-343-7354) or LiveChat (Found on the bottom right hand corer of our website). This allows XDP to offer you a more personalized response to your question as well as an open channel for further questions and conversation.

Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.