Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 423.94
Part #: ATS2029013228

ATS 2029013228 Ported Compressor Housing

1999.5-2003 Ford 7.3L Powerstroke
Part #: ATS2029013228
★★★★★ ★★★★★ 17 Reviews
$423.94
Ships directly from the manufacturer

An Email Will Be Sent With Expected Shipping Date After Purchase

SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description



The ATS 2029013228 Ported Compressor Housing is designed to increase turbo life in your 99.5-03 Ford 7.3L Powerstroke by eliminating the damaging effect of compressor surge. Offering significant advantages beyond a replacement compressor wheel, this upgraded housing with the factory wheel actually flows more than the popular compressor wheel replacements.

Anyone who has ever towed with a 99.5-03 Powerstroke has undoubtedly experienced compressor surge and flutter which occurs between 1800-2200 rpm. When performance products are added to increase horsepower, the compressor wheel accelerates faster and compressor surge and flutter becomes more apparent and damaging Another great benefit of the ATS Ported Shroud is a quieter ride. An opening wastegate, a bad torque converter, or a loose cover plate are a few of the excuses which people mistake for the compressor surge noise. Forget about it...with the ATS Ported Compressor Housing.

Features:

  • Enlarged 4" Inlet
  • 4" Upgraded Intake Boot
  • Increased Turbo Life
  • Smoother Exit Airflow
  • Increased Efficiency & Performance
Note: This ATS Compressor Housing comes in a RAW cast aluminum finish.

Specifications

  • MFG. Number 2029013228
  • Manufacturer Name ATS Diesel
  • Shipping Weight 9.00 lb.
  • Shipping Length 13 in.
  • Shipping Width 7 in.
  • Shipping Height 17 in.
  • Fuel Type Diesel
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

Currently Viewing Reviews with a rating of 2. Click here to reset.
★★★★★ ★★★★★
4.7/5 Stars out of 17 Reviews
5
14
4
2
3
0
2
1
1
0
Not impressed
2
(Washington) | November 27th, 2012
The workmanship of this housing is JUNK! JUNK! None of the castings have been smoothed- not even a little bit. The interior of the housing is as rough as 60 grit paper, where the molds come together, there is a massive seam and hollow empty shot creating large pits everywhere. The only surfaces that are acceptable are where they had to machine the o-ring seals, the bell around the impeller and the exterior for the intake tube. The paint is just that, paint- and not even good paint. It's not powder-coated like I was expecting. The ports aren't even clean, there are casting flags in all of the slots of the ports and on my particular shroud, there is a very thin spot along one of the sides were the casting didn't fill with aluminum. Terrible quality control. The quality of the OEM housing is FAR FAR superior to this piece and for the price, you're getting jacked hard-core.I have not towed with it yet so I can't speak on the performance, but, with what I see with the manufacturing, I'm not holding my breath. I'm hoping the other reviews on here are accurate and even if the workmanship is garbage, hopefully the performance will at least be what's expected.I cannot articulate how disappointed I am with the quality of this product. For ~$450, I was expecting a nice piece of machined aluminum that was going to add performace, aesthetics and value to my truck. I am literally embarrassed to have this chunk on my truck and I WILL NOT be showing it off to anyone.Garbage. It completely blows my mind that a company would put out a product this poor and charge this much for it. No shame at all. Boo-hiss on ATS and I'm disappointed in XDP for selling it.Install tip, don't tighten the 5 bolts unless you have your intake mounted- if you do, you're probably going to have to loosen them to get your intake to mount up. Also, if you have the ATS shroud and you get an AFE stage 2, you're going to need a 4" ABS sewer pipe coupler to connect them.

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Dose this come with the 4'' compressor housing boot?
View Staff Answer 
Answer
The 4' boot is also included with the housing.
I all ready fitted a new gt38 garret turbo. I need to pick up at a lower rpm. Does this fit the turbo?
View Staff Answer 
Answer

The ATS 2029013228 Ported Compressor Housing will only fit the factory Garrett turbo.

Do you offer this for the early 99 powerstroke?
View Staff Answer 
Answer

No, we do not offer the ATS 2029013228 Ported Compressor Housing for the early 99 applications because they typically do not have the compressor surge issues like the 99.5-03 applications.

how much power will this make on stock turbo
View Staff Answer 
Answer

Most items such as this are not physically “rated” at any HP levels from the manufacturer. To best answer your question we request that more personalized questions requiring further details on a person’s application be directed to one of our Diesel Experts. Experts are available via E-mail (), Phone (1-888-343-7354) or LiveChat (Found on the bottom right hand corer of our website). This allows XDP to offer you a more personalized response to your question as well as an open channel for further questions and conversation.

XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.
Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.