Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 339
Part #: BP25990

Banks Power 25990 Boost Tube System

2007.5-2009 Dodge Ram 6.7L Cummins
Part #: BP25990
Our Recommendations Compatible Products
Scroll to View More


Experience lower EGT's and faster turbo spooling from your 2007.5-2009 Dodge Ram 6.7L Cummins with the Banks Power 25990 Boost Tube System. Included with these tubes are 4 and 5-ply heavy-duty silicone couplers combined with spring-loaded constant tension clamps for a tight, reliable hold under high boost conditions. Banks hot and cold side tubes are constructed from a high-quality mandrel bent 3.5" aluminized steel tube for a smooth constant diameter and have up to 40% greater flow area versus the stock tubes. These higher flowing tubes retain more boost pressure between the turbo, intercooler, and intake which results in maximum horsepower. Combine the Banks Boost Tubes with the Banks 3.5 or 4" Monster Ram for the most power gains!

  • Quicker Turbo Spool
  • Hot & Cold Side Tubes
  • Gray Powder Coat Finish
  • Mandrel Bent 3.5" Tube Diameter
  • Increases Performance & Lowers EGT's
  • Includes Heavy-Duty Silicone Couplers & Clamps
Note: This kit is designed to work with the stock intercooler or aftermarket intercoolers with stock inlet and outlet sizes. 


  • MFG. Number 25990
  • Manufacturer Name Banks Power
  • Shipping Weight 13.00 lb.
  • Shipping Length 24 in.
  • Shipping Width 16 in.
  • Shipping Height 5 in.
  • Fuel Type Diesel
  • UPC 801279259904
  • Prop 65 WARNING: Cancer & Reproductive Harm -


No Reviews Yet!

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)
No Questions asked yet!
Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.