0
No Products
Banks Power 42764 Monster-Ram Intake With Boost Tube
PART#
42764 | SKU BP42764
★★★★★
Vehicle Fitment For:
1998.5-2002 Dodge with 5.9L Cummins Engine
See full application list below
$499.00
FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?
Description
Upgrade the intake elbow in your 1998.5-2002 Dodge 5.9L Diesel with the Banks Power 42764 Monster-Ram Intake With Boost Tube. This intake was engineered using electronic computational fluid-dynamic technology, tested on the flow bench and dyno, and proven in the real world. The Monster-Ram improves airflow and raises boost without increasing backpressure at the turbine. This gives you enhanced power, flow, and efficiency. This manifold is pre-drilled and tapped so you can easily install a water-methanol injection system, nitrous injection, or a boost gauge. The Monster-Ram Intake directly replaces your factory elbow and enhances flow over the factory intake’s cramped, angular design. This intake is CNC port-matched to the stock heater and is great for use with a grid heater delete spacer. The Banks Monster-Ram is made to outflow the factory elbow by nearly 57%. Includes 3-1/2" mandrel-bent boost tube, intercooler boot, clamps and hardware.
Features:
- Increased Airflow
- CARB EO# D-161-107
- Delivers Instant Torque
- Quicker Throttle Response
- Enhanced Efficiency & Performance
- Pre-Drilled & Tapped 1/8" NPT Ports
- Outflows Factory Elbow By Nearly 57%
- Improves Airflow From The Intercooler
- Includes 3-1/2" Mandrel-Bent Boost Tube
- Larger & Less Restrictive Than Factory Elbow
- Raises Boost Without Increasing Turbine Drive Pressure
- CNC Port-Matched For Stock Heater & Banks Billet Heater Delete
Disclaimer: XDP is in no way affiliated with Cummins or any of its subsidiaries or related companies, and that Cummins has not authorized the sale of any of XDP's parts, and has not tested or approved any of XDP’s parts for use in genuine Cummins brand products.
Instructions & Tech Info
Installation Info
Reviews For Banks Power 42764
Overall Rating
/5
8 Reviews
Intake horn
Mike | May 1st, 2021
No problems with the parts they work fine, just if imma pay this amount for a part I expect it to be fully red. But no big deal not going to return it to get it coated.
Write a Review
Review this product and help other XDP customers make informed decisions!
Frequently Asked Questions
What is the advantage of the monster ram over the high ram? I have a 98.5 dodge cummings 5spd
Can you please tell me if the banks monster ram intake manifold will fit?
AirDog and AirDog II 100 units are recommended for up to 500 horsepower.
AirDog 150 and AirDog II 165 units are recommended for horsepower up to 800.
AirDog II 200 units are recommended for anything that exceeds 1000 horsepower.
What are the differences between and AirDog and AirDog II?
The AirDog II aside from having the adjustable regulator, the pump and base assembly are designed different internally. The pump assembly has a Dual Inlet design allowing more fuel to flow into the Gerotor, this allows the pump to increase volume without having to work any harder. The base on the AirDog II is also much different. Internally the fuel is redirected through passageways after being pressurized, this allows less fuel to be returned to the tank and more fuel to be held in the filters for a true "On Demand" system.[@answer]
AirDog 150 and AirDog II 165 units are recommended for horsepower up to 800.
AirDog II 200 units are recommended for anything that exceeds 1000 horsepower.
What are the differences between and AirDog and AirDog II?
The AirDog II aside from having the adjustable regulator, the pump and base assembly are designed different internally. The pump assembly has a Dual Inlet design allowing more fuel to flow into the Gerotor, this allows the pump to increase volume without having to work any harder. The base on the AirDog II is also much different. Internally the fuel is redirected through passageways after being pressurized, this allows less fuel to be returned to the tank and more fuel to be held in the filters for a true "On Demand" system.[@answer]
The two intake manifolds are extremely similar when it comes to performance, but the Banks Power High-Ram 3 1/2" Intake Manifold 42764 extends that performance one step further by upgrading the boost tube to a larger 3.5” diameter. Larger tubing with the absence of flat spots and sharp curves equals better airflow. Any restriction that reduces pressure also reduces air density. Therefore, smooth large-diameter boost tubes effectively add air density by having less of a pressure drop than the factory boost tubes.
The 2 items will fit all 98-02 5.9L Cummins.
What is the difference between 3" and the 3 1/2" intake for general ranch purpose with this product?
The two intake manifolds are extremely similar when it comes to performance, but the Banks Power High-Ram 3 1/2" Intake Manifold 42764 extends that performance one step further by upgrading the boost tube to a larger 3.5” diameter. Larger tubing with the absence of flat spots and sharp curves equals better airflow. Any restriction that reduces pressure also reduces air density. Therefore, smooth large-diameter boost tubes effectively add air density by having less of a pressure drop than the factory boost tubes. The 3" manifold utilizes your stock 3" boost tube, which is more obstructive on airflow.
Do I have to remove my grid heater for this to fit under the hood?
The Banks Power High-Ram 3 1/2" Intake Manifold 42764 would not require the removal of the Grid Heater. The item will install with the Grid Heater left in place.
In the last picture, what are the arrows pointing to?
1/8" NPT port locations
Ask A Question
Ask a question about this product
Please allow up to 1 business day for reply.
Specifications For Banks Power 42764
MPN
42764
SKU
BP42764
GTIN
801279427648
ID
4667
Manufacturer Name
Banks Power
Shipping Weight
37.00 lb.
Shipping Length
19 in.
Shipping Width
15 in.
Shipping Height
26 in.
Fuel Type
Diesel
E-Code
2
EO Number
d-161-107
Prop 65
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Internal
L2R0
ITEM ADDED TO CART
Complete the job with these highly suggested add-on products.
Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.