{{ product.name }} See New Part # {{ product.superseded_product_sku }} {{ determineProductPrice( product ) }} {{ determineProductSalePrice( product ) }}
0
No Products
No Results Showing Parts for — {{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
USD
190.95
Part #: BD1041460
BD-Power 1041460 Exhaust Manifold
★★★★★
Buy now, pay later using 
during checkout.
during checkout.
FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?
Our Recommendations
Compatible Products
Close
Part #: {{:: (product.sku == undefined) ? product.code : product.sku }}
{{:: product.customfield_values.customfields.short_desc }}
View Details
Description
The BD-Power 1041460 Full Bore Exhaust Manifold from XDP replaces the factory driver's side "pinched down" unit, restoring exhaust flow and balances the V8 engine. Made from high-silicon ductile iron, the Full Bore is a direct, bolt-in replacement for the factory manifold and is even drilled and tapped to accept the most popular EGT probes. Manifold gaskets not included.
Features:
- Direct, Bolt-In Replacement
- High-Silicon Ductile Iron Construction
- Pre-Drilled & Tapped For EGT Probes
Shipping Restrictions Apply 
This product can not be shipped to these states/provinces: CA
This product can not be shipped to these states/provinces: CA Vehicle Fitment
| YEAR | MAKE | MODEL | FOR ENGINE SERIES |
|---|---|---|---|
| 2001 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2002 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2003 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2004 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2005 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2006 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2007 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2008 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2009 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2010 | Chevrolet | Silverado 2500 HD | 6.6 |
| 2001 | Chevrolet | Silverado 3500 | 6.6 |
| 2002 | Chevrolet | Silverado 3500 | 6.6 |
| 2003 | Chevrolet | Silverado 3500 | 6.6 |
| 2004 | Chevrolet | Silverado 3500 | 6.6 |
| 2005 | Chevrolet | Silverado 3500 | 6.6 |
| 2006 | Chevrolet | Silverado 3500 | 6.6 |
| 2007 | Chevrolet | Silverado 3500 Classic | 6.6 |
| 2007 | Chevrolet | Silverado 3500 HD | 6.6 |
| 2008 | Chevrolet | Silverado 3500 HD | 6.6 |
| 2009 | Chevrolet | Silverado 3500 HD | 6.6 |
| 2010 | Chevrolet | Silverado 3500 HD | 6.6 |
| 2001 | GMC | Sierra 2500 HD | 6.6 |
| 2002 | GMC | Sierra 2500 HD | 6.6 |
| 2003 | GMC | Sierra 2500 HD | 6.6 |
| 2004 | GMC | Sierra 2500 HD | 6.6 |
| 2005 | GMC | Sierra 2500 HD | 6.6 |
| 2006 | GMC | Sierra 2500 HD | 6.6 |
| 2007 | GMC | Sierra 2500 HD | 6.6 |
| 2008 | GMC | Sierra 2500 HD | 6.6 |
| 2009 | GMC | Sierra 2500 HD | 6.6 |
| 2010 | GMC | Sierra 2500 HD | 6.6 |
| 2001 | GMC | Sierra 3500 | 6.6 |
| 2002 | GMC | Sierra 3500 | 6.6 |
| 2003 | GMC | Sierra 3500 | 6.6 |
| 2004 | GMC | Sierra 3500 | 6.6 |
| 2005 | GMC | Sierra 3500 | 6.6 |
| 2006 | GMC | Sierra 3500 | 6.6 |
| 2007 | GMC | Sierra 3500 HD | 6.6 |
| 2008 | GMC | Sierra 3500 HD | 6.6 |
| 2009 | GMC | Sierra 3500 HD | 6.6 |
| 2010 | GMC | Sierra 3500 HD | 6.6 |
Specifications
- MPN 1041460
- SKU BD1041460
- GTIN 019025003361
- ID 842
- Manufacturer Name BD-Power
- Shipping Weight 12.00 lb.
- Shipping Length 18 in.
- Shipping Width 5 in.
- Shipping Height 5 in.
- Fuel Type Diesel
- E-Code 4
-
Prop 65
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
- Internal L7R4
Frequently Bought Together
In-Stock
GM 97188685 Exhaust Manifold To Up-Pipe Gasket
$12.29
Vehicle Fitment:
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML
In-Stock
GM 98002804 Exhaust Manifold Gasket
$49.37
Vehicle Fitment:
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML
In-Stock
MAHLE MS19398 Exhaust Manifold Gasket Set
$22.96
Vehicle Fitment:
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML
In-Stock
ARP 672-1003 Chromoly Bolts (M10 X 1.50 X 30)
$11.51
Vehicle Fitment:
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML (M10 X 1.50 X 30 - Fits Duramax Up-Pipes)
2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML (M10 X 1.50 X 30 - Fits Duramax Up-Pipes)
Reviews
★★★★★
4.5/5 Stars out of 10 Reviews
0
0
0
5
5
DirtyDmax (Philly Pa) | February 27th, 2012
bought this for the pyrometer hole, wrks great all day job for sure.
Zak (Greenfield Center, NY) | February 15th, 2014
I Bought the manifold for a couple of reasons: Pyrometer hole, the full flowing design, and to balance off the exhaust flow coming off the engine, all of which it accomplished. It was a minor pain to swap it out though. The directions included in the kit are a little simplified. Removing the steering column made the job a lot easier, but wasn't mentioned in the directions. I also found that applying heat (torch) to the bolt heads, they spun right out. Just watch out for the wiring harness. As stated in the directions, I re-used the factory gaskets and have no leaks. Overall a good product, I'm not at all disappointed with the purchase. Probably 3 hours start to finish to install, not including paint.
Robert O. (Bellingham, WA) | October 13th, 2014
Makes sense to buy this just for the pyrometer hole. Seems pointless that the OE has a big kink after the 1st cylinder to clear the steering column (which is unnecessary). Got this for pyrometer and for complete exhaust system w/ mbrp downpipe and 5" exhaust. Not too hard to install. Uppipe bolts were the hardest part.
Write a Review
Questions and Answers
Is this just a manifold for the drivers side?
View Staff Answer
Answer
The BD-Power 1041460 Full Bore Exhaust Manifold covers only the driver side manifold. The factory driver side exhaust manifold in the 01-10 Duramax is pinched down. This pinch restricts the exhaust flow significantly and disrupts the balance of the engine. With the addition of this manifold you’ll match the passenger side flow and balances the engines exhaust pressure. * At this time this kit does not come with a manifold gasket. Currently the highest quality gasket is the GM gasket.
will the edge egt probe fit in the port on this manifold
View Staff Answer
Answer
Yes, an Edge Products EGT probe will fit into BD-POWER 1041460 FULL BORE EXHAUST MANIFOLD.
Ask a question about this product
Please allow up to 1 business day for reply.
More to Consider
Recently Viewed
Complete the job with these highly suggested add-on products.
Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.