Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 179.95
Part #: BD1045911

BD-Power 1045911 Turbine Housing 16cm (Non-W/G)

1988-1993 Dodge 5.9L Cummins
Part #: BD1045911
$179.95
In-Stock
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The BD-Power 1045911 Turbine Housing 16cm (Non-W/G) Flowed turbine housings for low and high rpm boost control to match your engine for maximum air control. Waste gated and non waste gated housings are available to match your high horsepower engine.

The stock turbocharger exhaust housing on the 94-98 12 valve engine is a 12 cubic centimeter that performs well on engines that are developing up to 250 hp. Once you are above this rating, the exhaust flow is so high that the stock housing offers a high drive pressure that prevents the boost pressure from entering the combustion chamber. We have a 14 cubic center meter wastegated housing that will handle this extra 250 hp + exhaust volume and reduce the amount of drive pressure required to turn the turbine wheel. 

In the 1989/90 5.9 6BTA Cummins a 18 cubic centimeter housing is a little to large and the turbo lag can be eliminated with a 16 cubic center housing.

The 91-93 engines have a 20 square center housing and turbo lag is quite obvious. By installing the non-waste gated 16 square centimeter housing, higher boost pressure and our larger injectors can pump the engine up to a 210 hp engine with 22 pounds of boost pressure.


Vehicle Applications

YEAR MAKE ENGINE
1989 Dodge 5.9L 12V Cummins
1990 Dodge 5.9L 12V Cummins
1991 Dodge 5.9L 12V Cummins
1992 Dodge 5.9L 12V Cummins
1993 Dodge 5.9L 12V Cummins

Specifications

  • MFG. Number 1045911
  • Manufacturer Name BD-Power
  • Shipping Weight 13.00 lb.
  • Shipping Length 8 in.
  • Shipping Width 8 in.
  • Shipping Height 5 in.
  • Fuel Type Diesel
  • UPC 019025007420
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

No Reviews Yet!

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Is the housing exhaust side still the same length as factory so i can use the same mounts for my downpipe?
View Staff Answer 
Answer
The BD-Power 1045911 Turbine Housing is designed as a bolt-on ugprade that will retain the use of the factory exhaust system and downpipe.
Do I need to change the exhaust turbine wheel or any of the internals? How does it affect high rpm power?
View Staff Answer 
Answer

The housing will eliminate turbo lag, increase responsiveness and added performance. The turbine housing requires no changes in exhaust wheels or internals.

94-98 engines have a 12 cubic centimeter that performs well on engines that are developing up to 250 HP, but anything above 250HP will require a larger housing like the 16 cubic center housing

91-93 engines have a 20 square center housing, which has a noticeable deal of turbo lag

89-90 engines have a 18 cubic centimeter housing that’s a little too large as well

Is this t3 or t4 flanged and what size is the downpipe v-band?
View Staff Answer 
Answer
The BD-POWER 1045911 TURBINE HOUSING 16CM (NON-W/G) is designed to replace the factory exhaust (turbine) housing on a 1988-1993 Dodge 5.9L Cummins. This unit will bolt up to the factory exhaust manifold and also to the factory downpipe
Woukd this fit a 3" and or 4" downpipe?
View Staff Answer 
Answer
The BD-POWER 1045911 TURBINE HOUSING 16CM (NON-W/G) will fit any size downpipe regardless of its size as long as its flanged for the factory turbo in a 1988-1993 Dodge 5.9L Cummins.
We do not offer any complete 6 speed conversion kits. Your best bet would be to locate a donor truck for the complete swap.

Ask a question about this product

Please allow up to 1 business day for reply.

ITEM ADDED TO CART

Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.