Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 67 67 67
Part #:

BD-Power Turbo Boost Builder

1998.5-2012 Dodge 5.9L & 6.7L Cummins
Part #:
★★★★★ ★★★★★ 24 Reviews
Additional Processing Time Required

An Email Will Be Sent With Expected Shipping Date After Purchase

Our Recommendations Compatible Products
Scroll to View More


Turbo Boost Builders
To get more performance out of your Dodge turbo, plug in BD's electronic Boost Builder, which increases fueling on electronically controlled engines, increasing exhaust volume and boost pressure - plus it prevents over boost trouble codes.

Note: The BD Boost Fooler will not work on 2010-2012 Cab & Chassis models with Urea Systems.

Product Options

1515931 98-00 24V w/ Round Map Plug
1515932 2001 w/Oval Map Plug
1515933 2002 w/Flat Map Plug
1515935 2003-2004
1515936 2004.5-2007 "600 Series"
1515937 2007.5-2012 6.7L


  • Manufacturer Name BD-Power
  • Shipping Weight 3.00 lb.
  • Shipping Length 9 in.
  • Shipping Width 7 in.
  • Shipping Height 2 in.
  • Fuel Type Diesel
  • Prop 65 WARNING: Cancer & Reproductive Harm -


★★★★★ ★★★★★
4.0/5 Stars out of 24 Reviews
Not worth the money
(Olean NY) | February 11th, 2009
Installed in my truck and noticed no increase after two weeks made check engine light come on and made truck run ruff took it off and truck runs fine again would'nt suggest this to my worst enemy!!!!
worth the money so far,but we'll see.
(Noble, Oklahoma) | March 10th, 2009
just installed in my truck and was easy to find the Map Sensor. thanx xdp!
No Problem
(Hollister, CA) | May 25th, 2009
The directions are a bit vague, but still very easy to find the map-sensor and install. The map sensor can be found right near the stock location for the lift pump. Took a total of 20 minutes to find and install. There were no extreme changes to numbers and feel but does help with spool up.
Pages 1   2   3   4   5

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Is this product compatable with a Banks Tuner?
View Staff Answer 

Yes it will. Boost foolers are meant to be used with a programmer.

Will this item work on a 2014 Cummins?
View Staff Answer 

No it will not, BD only offers the Turbo Boost Builder for the 98.5-12 Dodge 5.9L & 6.7L Cummins at this time.

How much boost will it make?
View Staff Answer 

1998.5-2004 5.9L Cummins

On 1998.5-2004 5.9L Cummins you will need to physically modify your wastegate to gain more turbo boost. Doing this without the Boost Fooler will result in check engine lights and codes set into the computer. Stock 98-04 trucks should generate 18-23psi of boost pressure stock (depending on year model). With the Boost Fooler you will be able to run 35+ psi of boost depending on your fueling enhancements.

2004.5-2007 5.9L Cummins “600” and “610” Series Engines

The 2004.5-2007 5.9L Cummins uses an electronic wastegate which is operated off of the MAP sensor. In this instance no modifications to your turbo will be necessary. Stock 04.5-07 trucks typically spike up to 32psi of boost pressure. With the Boost Fooler you will see up to 40psi of boost on a stock truck and up to 48psi of boost on heavily fueled trucks.

2007.5-2009 6.7L Cummins

For the new 6.7L we have yet another new turbo design. This turbo uses electronically controlled vanes inside the turbo to adjust boost levels and allow for quicker spool up and ability to precisely control EGT’s. With the boost fooler installed you will see drops of 125 degrees on a stock truck (considerably more on modified trucks), up to 10psi peak boost gain and 6-8 psi sustained boost gain. This is the ONLY product on the market that is plug-and-play. There is no cutting, no splicing and no guessing. Simply plug this device in enjoy it!

All of these products can help increase the life of your engine by lowering peak exhaust temperatures while also giving you a small boost in power to go with it!

Where does the boost fooler hook up?
View Staff Answer 

It depends on the application - Click your application below to view the Install Guide:

1998 – 2002 Cummins 5.9L -

2003 – 2007 Cummins 5.9L -

2007 – 2010 Cummins 6.7L -

XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.
Emissions Notice

This product is not legal for sale or street use in California. Certain aftermarket products are subject to governmental emission standards regulated by the California Air Resources Board. In order for these products to be legal on a specific vehicle in California, the part number must receive a CARB Executive Order (EO) number. This number makes the part legal for use only on specific years, makes and models of vehicles. A decal with CARB EO number for these parts must be displayed in the engine bay to satisfy smog inspection requirements.