Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Part #: BL24-187213

Bilstein 5100 Series Shock Absorber 24-187213

1994-2013 Dodge Ram 2500 4WD | 1994-2012 Dodge Ram 3500 4WD (Front) Lifted 6"-8"*
Part #: BL24-187213
$70.97
In-Stock
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

Part Number: 24-187213
Old Part Number: F4-BE5-F255-H0

Setting: 5100 Series
Drive Type: 4WD
Position: Front
Descriptor: Front Lifted Height: 6-8"
Quantity Needed Per Vehicle: 2

*Collapsed Length (IN): 19.57
*Extended Length (IN): 30.31
*Collapsed Length (MM): 497
*Extended Length (MM): 770
Finish: Zinc plated
Reservoir: No
Body Design: 46mm ID smooth body (Non-coilover)

The Bilstein 24-187213 5100 Series Shock Absorber are high performance, high gas pressure monotube shocks designed specifically for lifted pickups, SUV's and Jeeps. These shocks look as good as they perform with a zinc-plated steel body and triple-c coating technology. Internally, they feature a 46mm digressive piston with self-adjusting deflective disc valving. The super damping ability that makes them ideal for heavy hauling or occasional off-road use, while maintaining an excellent ride on the street.

*6"-8" Lift is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet.

Shock Absorbers sold individually.

Specifications

  • MFG. Number 24-187213
  • Manufacturer Name Bilstein
  • Shipping Weight 5.00 lb.
  • Shipping Length 27 in.
  • Shipping Width 3 in.
  • Shipping Height 3 in.
  • UPC 651860608518
  • Warranty Yes
  • Warranty Info Limited Lifetime
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

Be the first to rate this item!

Write Review

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

I have a 06 dodge 3500 Cummins lifted 5 inch suspension and 3 inch body. Plan on putting 2 inch coil spacers on. These shocks for 6-8 inch lift should work right?
View Staff Answer 
Answer
Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet.

The BILSTEIN 5100 SERIES SHOCK ABSORBER 24-187213 has a Collapsed Length of 19.57" and Extended Length of 30.31".