Dayco DP1002 Water Pump

Replace your old or worn out water pump with the Dayco DP1002 Water Pump for your Ford 6.0 Powerstroke. This Water Pump is made with a case-hardened roller bearing with a tough exterior and an interior that allows for flex without breaking. A single-piece, forged steel pulley design eliminates the weak spots of welded designs. Each Water Pump meets TS16949 quality standards throughout die casting, foundry, machining and assembly.

Features:

• Direct-Fit Replacement
• 100% End-Of-Line Leak Tested
• Meets or Exceeds Factory Specifications
• 100% New Material, No Recycled Components
• Stock Style 100mm Impeller (Factory Size For 2004.5 & Up Models)

Model Year Information:
2003 Models: If you have a 2003 you are in the 2003-2004.25 production date.
2004 Models: If you have a 2004 model you must check your VIN code to determine your production date.
2005 Models: If you have a 2005 or newer, you have a 2004.25 and newer production date.

A sample VIN code is: 1FTRW21P24EB10150. In the middle of the VIN code, you see the digits "4EB". The 4 means that it was a 2004 model year. The "E" denotes which production plant built your truck. In this case, E is for Kentucky. Lastly, the "B" is the start of the sequence number (the last 6 digits of the VIN). Some early 2004 models have a "4EA" code. The "A" denotes the early build and most likely is a 2003-2004.25 production date. For example letter "B", "C", "D" or more all denote later model 2004 builds with 2004.25 and newer production dates, or if the water pump is already off the truck you can measure the impeller.