Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Head Studs & Fasteners

New Product Filters!
ARP 147-2502 Balancer Bolt Kit 18696 1.00 ARP 147-2502 Balancer Bolt Kit
$ 33.99
The ARP Dodge Cummins Balancer Bolt Kits are optimized for enhanced reliability and increased strength. Each kit includes four (M12 x 1.25) 8740 Pro Series balancer bolts that are rated at 200,000 psi tensile strength, four 8740 parallel ground washers and a 1/2 oz. pack of ARP Ultra-Torque fastener assembly lubricant. ARP bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining and designed to exceed the OEM fasteners in strength and durability. Optimum design, enhanced reliability and increased strength are the main attributes of ARPs Pro Series balancer bolt kits. Features: Increased Strength Increased Reliability 200,000 PSI Tensile Strength 4 (M12 x 1.25) Bolts
ARP 147-2901 Flex Plate Bolt Kit 5912 1.00 ARP 147-2901 Flex Plate Bolt Kit
$ 44.99
Replace the factory Flex Plate bolts in your 1989-2007 Dodge 5.9L Cummins with the ARP 147-2901 Flex Plate Bolt Kit. Flexplate bolts play an important role in the performance and safety of race vehicles and street machines. That's why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP Flexplate bolts feature an exclusive flat 12 point head design and a larger than stock underhead radius for increased strength. Each bolt is centerless ground to ensure the bearing surface is perpendicular to the threads creating equal load distribution. Optimum design, enhanced reliability and increased strength are the main attributes of ARP's Flexplate Bolts. Features: Superior To OEM HardwareExclusive Flate 12-Point Head Design Thread Size: M12 x 1.25Socket Size: 3/4 - 12-Point
ARP 247-6303 Rod Bolt Kit 12118 2.00 ARP 247-6303 Rod Bolt Kit
$ 157.99
Add extra strength to the rotating assembly in your 1989-2002 Dodge 5.9L Cummins with the ARP 247-6303 Rod Bolt Kit. Built from premium grade 8740 alloy chrome-moly steel, ARP's High Performance Connecting Rod Bolts are heat-treated to provide tensile strength in the 200,000 PSI range. Which is substantially stronger than the OEM bolts. Cycle testing shows ARP's Rod Bolts to be nearly five times more reliable than the stock bolts. Features:200,000 PSI Tensile Strength8740 Alloy Chrome-Moly Steel Substantially Stronger Than OEMNote: These bolts are designed for use on the angled cap rods only.
ARP Diesel Custom Age 625+ Head Stud Kit 247-4205 2146 10.00 ARP Diesel Custom Age 625+ Head Stud Kit 247-4205
$ 1110.99
ARP ADDS 260,000 PSI HEAD STUDS FOR DODGE/CUMMINS and DURAMAX DIESELS With performance enthusiasts adding increasing amounts of turbo boost to diesel applications, ARP has provided an extra measure of security in the form of extra-strong head studs manufactured from the firm's proprietary Custom Age 625+ material that has a minimum rating of 260,000 psi tensile strength. They are engineered to provide the clamping force required to keep cylinder heads from lifting due to exceptionally high combustion pressures. ARP also offers head stud kits made from ARP2000 (220,000 psi minimum) for the Dodge/Cummins plus Chevy Duramax diesel, Ford 7.3L Powerstroke diesel, and 6.0L Powerstroke. The stud kits include heat-treated chrome-moly steel nuts (12-point) and parallel ground washers. The studs are manufactured in ARPs Santa Paula, CA plant, with threads rolled after heattreat to provide optimum fatigue strength. They are centerless ground to assure perfect concentricity. The ends of the studs are broached to acilitate easy installation. This feature also enables the cylinder head to be removed in tight quarters.
ARP Diesel Head Stud Kit 247-4203 1555 9.00 ARP Diesel Head Stud Kit 247-4203
$ 441.36
To overcome head gasket failures that can occur in diesel engines employed in truck and RV applications, industry leader ARP has introduced extra heavy-duty head studs for the popular Ford, Dodge and GM powerplants. These ARP studs are rated at 220,000 psi tensile strength, and provide the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. The studs are manufactured in ARP's Santa Paula, CA plant from proprietary ARP 2000 material, with threads rolled after heat-treat to provide optimum fatigue strength. They are centerless ground to assure perfect concentricity. The ends of the studs are broached to facilitate easy installation. This feature also enables the cylinder head to be removed in tight quarters. Also included in each kit are heat-treated, chrome-moly steel 12-point nuts and parallel-ground washers. They are black oxide finished for extra durability. Features: ARP 2000 Material 220,000 PSI Tensile Strength Chrome-moly Steel, 12-Point Nuts Parallel-Ground Washers Note: Rocker Arm Pedestals must be modified for installation.
ARP Flywheel Bolt Kit 147-2802 12116 2.00 ARP Flywheel Bolt Kit 147-2802
5 5 1
$ 59.99
Flywheel bolts play an important role in the performance and safety of race vehicles and street machines. That's why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP Flywheel bolts feature an exclusive flat 12 point head design and a larger than stock underhead radius for increased strength. Each bolt is centerless ground to ensure the bearing surface is perpendicular to the threads creating equal load distribution. Optimum design, enhanced reliability and increased strength are the main attributes of ARP's Pro Series flywheel bolts. Includes eight 8740 Pro Series flywheel bolts that are rated at 200,000 PSI and a set of eight parallel ground chamfered washers that replace the factory Dodge bolt and washer part# 06501680/681. Note: *Not for use on 05 and later Dual Mass Flywheels
Fleece FPE-34211 Dual Pump Spoke Pulley 34776 3.00 Fleece FPE-34211 Dual Pump Spoke Pulley
$ 219
The Fleece FPE-34211 Dual Pump Spoke Pulley is designed for use on your 2003-2016 Dodge 5.9L/6.7L Cummins with the Fleece Dual Pump Bracket. This Pulley is specially machined with a spoke design and is ready for use in your dual pump setup. Features:Dual CP3 PulleyFor Use With Fleece Dual Pump BracketColor Options:FPE-34211-BLK-SPK - BlackFPE-34211-BLU-SPK - Blue FPE-34211-ORG-SPK Orange FPE-34211-RED-SPK - Red
Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head) 44198 1.00 Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head)
$ 199
Upgrade the rusty or broken exhaust manifold studs on your 1994-2018 Dodge Cummins 5.9L/6.7L with a Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head). These exhaust manifold studs are constructed from aged 603 stainless steel and feature a 7 mm external hex head for easy installation. The Stainless Steel is not only rust and corrosion resistant so these studs always look good, but they are also stronger than the factory bolts and allow for a higher clamping force and easier installation.Features:7mm External Hex HeadAged 603 Stainless Steel12 Point Nuts and Washers IncludedHigher Clamping Force (Torque to 40ft/lbs using Anti-Seize)Application Note:Cummins 5.9L 12V (1994 - 1998) - Aftermarket exhaust manifold onlyCummins 5.9L 24V (1998.5 - 2002)Cummins 5.9L 24V (2003 - 2007) - Requires removal of factory heat shieldCummins 6.7L 24V (2007.5 - 2018)
Fleece FPE-34772 Exhaust Manifold Stud Kit (4mm Allen Socket Head) 44199 1.00 Fleece FPE-34772 Exhaust Manifold Stud Kit (4mm Allen Socket Head)
$ 199
If you broke an exhaust manifold stud on your 1994-2018 Dodge Cummins 5.9L/6.7L it’s time to upgrade to a Fleece FPE-34772 Exhaust Manifold Stud Kit (4mm Allen Socket Head). The Fleece exhaust manifold studs are manufactured from a high quality aged 603 stainless steel and feature a 4 mm external hex head for easy installation. The Stainless Steel is impervious to rust and corrosion so the studs won’t corrode over time, but they are also stronger than the stock OEM bolts which allows for a higher clamping force and easier installation.Features:4mm Allen Socket HeadAged 603 Stainless Steel12 Point Nuts and Washers IncludedHigher Clamping Force (Torque to 40ft/lbs using Anti-Seize)Application Note:Cummins 5.9L 12V (1994 - 1998) - Aftermarket exhaust manifold onlyCummins 5.9L 24V (1998.5 - 2002)Cummins 5.9L 24V (2003 - 2007) - Requires removal of factory heat shieldCummins 6.7L 24V (2007.5 - 2018)
XDP Exhaust Manifold Installation Bolt Kit XD230 33028 1.00 XDP Exhaust Manifold Installation Bolt Kit XD230
$ 21.95
Don't reuse the old, corroded bolts when installing a new exhaust manifold on your 1989-2018 Dodge 5.9/6.7L Cummins, replace them with the XDP Exhaust Manifold Installation Bolt Kit XD230. This kit includes (12) stainless steel allen head bolts and (12) stainless steel lock washers so you can install your new aftermarket exhaust manifold, with brand new hardware. Features: Stainless Steel Construction Includes Anti-Seize Lubricant (12) Allen Head Bolts and Lock Washers Note: This kit is intended for use on aftermarket exhaust manifolds and will not work with the stock manifold, or with the stock spacers. Due to different model years, and configurations, there are some instances where the factory supplied hardware is re-used and may take place of a bolt. In those situations, not all the bolts within this kit will be needed. Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.