The DDP Boost Elbow for your 1994-2002 Dodge 5.9L Cummins is an easy way to increase the output of your stock turbocharger. The Performance Boost Elbow is highly recommended for all trucks looking for more boost, especially those with fueling modifications. Will increase bottom end boost on factory turbos by as much as 50%. The use of a boost gauge is highly recommended.Features:Increase Boost By Up To 50%Easy InstallationNote: This product will not fit on the 2001-2002 automatic models due to physical differences in the compressor housing.Diesel Site Wicked Wheel 2 WW3595248482.00
The Diesel Site Wicked Wheel 2 WW3595 improves the throttle response from your 1994-1998 Dodge 5.9L Cummins and boosts the performance. Thoroughly tested to ensure you will get the best results for every application, the Wicked Wheel 2 improves boost, reduces EGT’s, and generates a faster spool-up over the original cast wheel. Features: Billet Design Lower EGT's Drop-In Replacement For Stock Turbo Increased Performance, Boost, Spool-up and More!Important tips: Holset turbos use two different style nuts holding the wheel on.If it is a 6 point nut, then tighten to 133 in/lbs.If it is a 12 point nut, then tighten to 124 in/lbs.It is a left hand thread (reverse thread), meaning you turn the nut to the right to loosen.Note: Will not fit on California emissions turbo #3538416. Will not work on 12V auto trans turbo 3533320.Diesel Site Wicked Wheel 2 WW3597CA304215.00
The unique design of the Diesel Site Wicked Wheel 2 WW3597CA will provide your 1995-1998 Dodge 5.9L Cummins with increased performance, boost, and reduced EGT's. Expertly designed to supply increased surge protection and increased performance, the Wicked Wheel 2 improves throttle response and provides an elite performance. Every Wicked Wheel 2 is thoroughly tested with multiple wheel configurations of blade numbers, dimensional changes and pitch adjustments to ensure you’re getting the absolute most from your Cummins.Features:Billet Design Lower EGT's Drop-In Replacement For Stock TurboIncreased Performance, Boost, Spool-Up and MoreNote: California emissions turbochargers are different. You must have turbo number 3538416. Please make sure before you order.Pacbrake C44083 Max Flow Elbow1915510.00
The 4" Max Flow Dodge Elbow is designed specifically for 1994-2002 Dodge Ram trucks equipped with 4" exhaust systems. This cast iron replacement elbow increases your exhaust flow, horsepower, torque and efficiency while reducing your exhaust gas temperature. Designed for use on stock turbocharger only. Features and Benefits: Lower EGT's Reduced Turbo Lag Increased MPG Pre-Drilled and Tapped 1/8" NPT Port Kit Includes: 4" stainless exhaust adapter, v-band clamp, (5) 12-point fasteners and Holset gasketTurbosmart TS-0553-1312 Gen-V WG45HP Hyper-Gate45 Wastegate805494.20
The Turbosmart TS-0553-1312 Gen-V WG45HP Hyper-Gate45 Wastegate is an revolution in boost control for your turbocharged vehicle. This 45mm wastegate delivers great advancements in design like a rotating housing, industry leading flow dynamics, 1/8” NPT reference ports and optional water cooling for thermal control. Also included with this wastegate are reference port fittings, 35psi of pre-loaded springs (25psi outer and 10psi inner), inlet and outlet weld flanges as well as valve seat and clamps needed for installation. Features: 45mm Valve SizeRotating HousingIndustry Leading FlowOptional Water Cooling1/8” NPT Reference Ports
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:
Effective 3/16 we have shifted Customer Service hours to 8:30 – 7:00pm EST. To ensure compliance with New Jersey’s recent curfew.
Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.