Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Differential Parts

New Product Filters!
BD-Power 1030703 2Low Unloc 6188 2.00 BD-Power 1030703 2Low Unloc
$ 148
The BD-Power 1030703 2Low Unloc for your 1994-2002 Dodge 5.9L Cummins is designed to provide you with the option of low range in 2WD! This kit is designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range. By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels. This will also allow for sharp All The Way Over turns without the front axle u - joint hopping or binding. With this kit installed, the front wheels will NOT be driven through the transfer case. This allows the operator to have full power and torque while in a high gear reduction applied to the rear axle(s) only Features: Enables Low Range 2WD Apply Maximum Torque To Rear Axle Only
Pacbrake C18056 2-Wheel Low Kit 19148 1.30 Pacbrake C18056 2-Wheel Low Kit
5 5 1
$ 160.15
This kit is specially designed for maneuvering your truck (and trailer) in tight, uphill conditions. The 4WD 2 Wheel Low switch allows the operator to engage the transfer case into 4WD low range without engaging the front wheel drive. Hit the dash activation switch to provide an extra low gear for backing up, which eliminates any front and rear wheel hop that you may have experienced. Features: Enables Low Gearing In 2WD Includes Dash Mounted Switch, Solenoid and Wiring Designed For Low Speed Maneuvering
USA Standard ZDS9105 Front Driveshaft Assembly 43782 22.00 USA Standard ZDS9105 Front Driveshaft Assembly
$ 378.98
Upgrade the driveshaft in your 1999 Dodge Ram 2500 5.9L Cummins/Dana 60/NV4500/NV241 (Regular Cab) - 32-13/16" Long with the USA Standard ZDS9105 Front Driveshaft Assembly. Made from incredibly durable high grade steel, the USA Standard Driveshaft can stand up top the daily wear and tear. Each Driveshaft is computer balanced to ensure that it runs smoothly. Backed by a 1 year warranty, each driveshaft is inspected for quality and features everything needed for installation. Features:1 Year Warranty Inspected For QualityEngineered For Performance Constructed From High Grade Steel.Compatible Differentials: Dana 60 Front, Disconnect Design, '99 onlyCompatible Make / Model:Dodge Ram 2500 3/4 Ton (1999 - 1999)Application Notes:Measured from center of U/Joint to center of furthest U/Joint with the driveshaft collapsed. 7290 Front U/JointCompatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.
USA Standard ZDS9106 Front Driveshaft Assembly 43783 22.00 USA Standard ZDS9106 Front Driveshaft Assembly
$ 378.98
Replace the OEM driveshaft in your 2000-2002 Dodge Ram 2500 5.9L Cummins/Dana 60/47RE/NV241HD (Regular/Extended Cab) - 29-1/8" Long with the USA Standard ZDS9106 Front Driveshaft Assembly. Backed by a 1 year warranty, each driveshaft is inspected for quality and features everything needed for installation. Each Driveshaft is computer balanced to ensure that it runs smoothly. Made from incredibly durable high grade steel, the USA Standard Driveshaft can stand up top the daily wear and tear. Features:1 Year Warranty Inspected For QualityEngineered For Performance Constructed From High Grade Steel.Compatible Differentials: Dana 60 Front, Disconnect Design, '00 and newerDana 60 Front, Disconnect Design, '99 onlyCompatible Make / Model:Dodge Ram 2500 3/4 Ton (2000 - 2002)Application Notes:Measured from center of U/Joint to center of furthest U/Joint with the driveshaft collapsed. 1330 Front U/JointCompatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.
USA Standard ZDS9108 Front Driveshaft Assembly 43784 22.00 USA Standard ZDS9108 Front Driveshaft Assembly
$ 378.98
Install the USA Standard ZDS9108 Front Driveshaft Assembly to your 1999 Dodge Ram 3500 5.9L Cummins/Dana 60/NV5600/NV241 (Regular Cab) - 32-13/16" Long for better drive-ability. Each Driveshaft is computer balanced to ensure that it runs smoothly. Made from incredibly durable high grade steel, the USA Standard Driveshaft can stand up top the daily wear and tear. Backed by a 1 year warranty, each driveshaft is inspected for quality and features everything needed for installation. Features:1 Year Warranty Inspected For QualityImproved Performance Constructed From High Grade Steel.Compatible Differentials: Dana 60 Front, Disconnect Design, '99 onlyCompatible Make / Model:Dodge Ram 3500 1 Ton (1999 - 1999)Application Notes:Measured from center of U/Joint to center of furthest U/Joint with the driveshaft collapsed. 1330 Front U/JointCompatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.
USA Standard ZDS9109 Front Driveshaft Assembly 43785 22.00 USA Standard ZDS9109 Front Driveshaft Assembly
$ 378.98
Dominate every road condition when you install the USA Standard ZDS9109 Front Driveshaft Assembly to your 2000-2002 Dodge Ram 3500 5.9L Cummins/Dana 60/NV5600/NV241 (Regular/Extended Cab) - 27-1/8" Long. Incredibly durable and resistant to daily wear and tear, the Driveshaft is constructed from high grade steel. Each Driveshaft Assembly is closely inspected to ensure quality and is computer balanced to ensure it runs smoothly. Each Driveshaft is backed by a 1 year warranty and provides your Ram with a performance that lasts.Features:1 Year Warranty Inspected For QualityEngineered For Performance Constructed From High Grade Steel.Compatible Differentials: Dana 60 Front, Disconnect Design, '00 and newerDana 60 Front, Disconnect Design, '99 onlyCompatible Make / Model:Dodge Ram 3500 1 Ton (2000 - 2002)Application Notes:Measured from center of U/Joint to center of furthest U/Joint with the driveshaft collapsed. 1330 Front U/JointCompatible Makes and Model Chart is for reference only. You must physically confirm the specific differential type in your vehicle for proper fitment as factory options may vary.