Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 46-40032 BladeRunner Ductile Iron Exhaust Manifold 16056 22.00 AFE 46-40032 BladeRunner Ductile Iron Exhaust Manifold
4.75 5 4
$ 417.99
Eliminate exhaust leaks from the old cracked manifold in your 1998.5-2002 Dodge 5.9L Cummins with the AFE 46-40032 BladeRunner Ductile Iron Exhaust Manifold. In testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving performance and throttle response. One-Piece Construction: This manifold is constructed of durable cast ductile iron with a reinforcing rib for maximum strength between the wall flanges at the ports. Dual Auxiliary Ports: Two Exhaust Gas Temperature (EGT) probe ports are supplied for easy installation of gauges or testing equipment. Features: Stock Sized Turbo Flange Machined Ports, Merged Runner Design Outflows Factory Exhaust Manifold By 50% Thicker Walled Design Eliminates Cracking Note: Gaskets and replacement hardware not included. See items below.
AFE 46-40034 BladeRunner Ported Ductile Iron Exhaust Manifold 31432 24.00 AFE 46-40034 BladeRunner Ported Ductile Iron Exhaust Manifold
$ 517.74
Outflow and outperform the factory exhaust manifold on your 1998.5-2002 Dodge 5.9L Cummins with the AFE 46-40034 BladeRunner Ported Ductile Iron Exhaust Manifold. The BladeRunner Ported Ductile Iron Exhaust Manifold outflows the factory manifold by 50% and features ported flanges for an excellent seal and clean stylish look. One-Piece Construction: This manifold is constructed of durable cast ductile iron with a reinforcing rib for maximum strength between the wall flanges at the ports. Dual Auxiliary Ports: Two Exhaust Gas Temperature (EGT) probe ports are supplied for easy installation of gauges or testing equipment. Hassle-Free Installation: All hardware and 6-port gaskets are included for a hassle-free installation. Features: Stock Sized Turbo Flange Outflows Factory Manifold By 50% Ported Flanges Ensure Excellent Seal and Clean Look Thick Walled Flange Design Increases Strength Dual, 1/8" NPT Ports Pre-Drilled and Tapped For EGT Probes Note: Replacement exhaust manifold bolts not included. See related items below.
AFE 46-60060-MB BladeRunner Street Series Turbo & Exhaust Manifold 28356 53.00 AFE 46-60060-MB BladeRunner Street Series Turbo & Exhaust Manifold
$ 1276.79
The AFE 46-60060-MB BladeRunner Street Series Turbo and Exhaust Manifold for your 1998.5-2002 Dodge 5.9L Cummins is an all-in-one kit for replacing your turbo and exhaust manifold. This stock replacement turbo requires no additional fueling and has been dyno tested and proven to increase performance. Direct Replacement: This turbo manifold kit can be installed on 1998.5-2002 model years as a direct, bolt-on replacement. All connections to the vehicle are compatible with the OE geometry, resulting in a quick and reliable connection. Compressor: The housing utilizes OE inlet and outlet. A wastegate actuator is mounted to the integrated cast bracket and comes preset to factory setting. One-Piece Construction: This manifold is constructed of durable cast ductile iron with a reinforcing rib for maximum strength between the wall flanges at the ports. Dual Auxiliary Ports: Two Exhaust Gas Temperature (EGT) probe ports are supplied for easy installation of gauges or testing equipment. Hassle-Free Installation: Hardware and gaskets are included for a hassle-free installation. Turbo Features: Pre-Set Wastegate Actuator Dyno Tested To Produce +4HP and +12 Ft-lbs. Stock Replacement, No Additional Fueling Required Bolt-On Replacement - All Connections Are Compatible To OE Geometry 2-Year Warranty Turbo Specifications: Compressor Inducer - 54 mm Compressor Exducer - 76 mm / Trim: 50 Turbine Inducer - 65 mm Turbine Exducer - 58 / Trim: 80 mm Turbine Housing: 12 cm2 Exhaust Manifold Features: Outflows Factory Exhaust Manifold By 50% Improves Performance and Throttle Response Cast Ductile Iron Construction Thick Walled Flange Design For Increased Strength Matched Ports and Merged Runner Design Reduces Backpressure Dual 1/8" NPT Exhaust Gas Temperature (EGT) Ports Are Supplied Note: Replacement exhaust manifold bolts not included.
AFE 48-32019 Twisted Steel T4 Header 43406 20.00 AFE 48-32019 Twisted Steel T4 Header
$ 978.5
Boost the torque and horsepower of your 1998.5-2002 Dodge 5.9L Cummins with the AFE 48-32019 Twisted Steel T4 Header available today at XDP.
AFE 48-32020 Twisted Steel T3 Header 43407 20.00 AFE 48-32020 Twisted Steel T3 Header
$ 978.5
Visit XDP today and get a superior performance from your 1998.5-2002 Dodge 5.9L Cummins when you purchase an AFE 48-32020 Twisted Steel T3 Header
ATS 2049302218 Pulse Flow Exhaust Manifold 239 27.00 ATS 2049302218 Pulse Flow Exhaust Manifold
4 5 6
$ 470.25
The ATS 2049302218 Pulse Flow Exhaust Manifold for your 1998.5-2002 Dodge 5.9L Cummins increases reliability and improves exhaust flow while eliminating the common cracking issues with your stock exhaust manifold. Designed as a bolt-on upgrade the ATS 3 piece manifold features a patented ball flange design that allows for expansion and contraction without cracking like the factory manifold. Features: CARB EO# D-708 Bolt-On Replacement Improved Exhaust Flow Black High-Temp Coating Stock Turbocharger Flange Pre-Tapped For Pyrometer Probe Note: Replacement manifold bolts are not included. Engine to manifold gaskets included. See related items below.
ATS 2049352218 Pulse Flow Center Wastegated Exhaust Manifold 32243 27.00 ATS 2049352218 Pulse Flow Center Wastegated Exhaust Manifold
$ 665
The ATS 2049352218 Pulse Flow Center Wastegated Exhaust Manifold for your 1998.5-2018 increases reliability and improves exhaust flow while eliminating the common cracking issues with your factory exhaust manifold. Designed as an upgrade, this 3-piece manifold features a T3 flange and has a center wastegate flange for those installing an external wastegate. Wastegate not included (see related items below). Features: T3 Flange Center Wastegate Flange High-Temp Black Coating Fits 45mm HyperGate Wastegate (Sold Separately) Note: This exhaust manifold is not intended for use with stock turbo setups. Replacement bolts not included. Engine to manifold gaskets included.
ATS 2049432218 Pulse Flow Big FOOT T4 Exhaust Manifold 12971 29.00 ATS 2049432218 Pulse Flow Big FOOT T4 Exhaust Manifold
$ 565.25
The ATS 2049432218 Pulse Flow Big FOOT T4 Exhaust Manifold for your 98.5-02 Dodge 5.9L Cummins increases reliability and improves exhaust flow while eliminating the common cracking issues with your stock exhaust manifold. Designed as a upgrade manifold for use with larger T4 Turbochargers, the ATS 3 piece manifold features a patented ball flange design that allows for expansion and contraction without cracking like the factory manifold. Features: T4 Flanged Exhaust Improved Exhaust Flow Patented Ball Flange Design Note: Not for use on stock turbochargers. For aftermarket T4 flange turbochargers only. Replacement bolts not included. Includes engine to manifold gaskets
BD-Power 1045947 Exhaust Pulse Manifold 745 24.00 BD-Power 1045947 Exhaust Pulse Manifold
4.444 5 9
$ 495
The BD-Power 1045947 Exhaust Pulse Manifold features a heavy-duty multi-piece design to eliminate manifold cracks in your 1998.5-2002 Dodge 5.9L Cummins. The single piece design of the factory exhaust manifold is prone to cracks which causes exhaust leaks that can rob you of power. The BD-Power Exhaust Pulse Manifold is cast from high silicon ductile iron, and features an expansion joint to allow the manifold to expand and contract without cracking. As the name would imply, these manifolds are "pulse tuned" to assist in combustion chamber evacuation and increased exhaust flow. The result is quicker turbo spool-up, reduced backpressure, increased power, and better fuel economy. Great for stock, and performance applications. Pre-drilled and tapped for pyrometer probe. Features: Expansion Joint Eliminates Cracking Pulse-Tuned For Maximum Performance Cast From Durable, High-Silcon Ductile Iron Replaces OE Part# 3946036 Note: Gaskets and replacement bolts not included. See related items below. In non-pickup applications such as motorhomes, please use OE number above to cross reference proper applications.
BD-Power 1045947-T4 Wastegated T4 40-Degree Exhaust Pulse Manifold 33867 24.00 BD-Power 1045947-T4 Wastegated T4 40-Degree Exhaust Pulse Manifold
$ 615
Use the BD-Power 1045947-T4 Wastegated T4 Exhaust Pulse Manifold at the start of your custom turbo system on your 1998.5-2018 Dodge 5.9L/6.7L Cummins. Featuring a heavy-duty multi-piece design to eliminate manifold cracks common with the factory manifold, the BD-Power Exhaust Pulse Manifold is cast from high silicon ductile iron with built-in expansion joints allowing your manifold to expand and contact without cracking. Machined for a 45mm Turbosmart HyperGate Wastegate, this exhaust manifold is perfect for those building a custom turbo setup. If an external wastegate is not being used, the included block-off plate can be installed instead. As the name would imply, these manifolds are "pulse tuned" to assist in combustion chamber evacuation and increased exhaust flow. The result is quicker turbo spool-up, reduced backpressure, increased power, and better fuel economy. Great for stock, and performance applications. Pre-drilled and tapped for pyrometer probe. Features: T4 Turbo Flange 40-Degree Center Mounted Flange Expansion Joint Eliminates Cracking Pulse-Tuned For Maximum Performance Cast From Durable, High-Silicon Ductile Iron Machined For 45mm TurboSmart HyperGate Wastegate Note: Gaskets, replacement bolts and wastegate not included. See related items below. For aftermarket T4 flanged turbochargers only.
BD-Power 1045986 Exhaust Manifold Gasket Set 33031 2.00 BD-Power 1045986 Exhaust Manifold Gasket Set
$ 69
The BD-Power 1045986 Exhaust Manifold Gasket Set gives you the necessary gasket to install an exhaust manifold on your 1998.5-2007 Dodge 5.9L Cummins. This kit features OE gaskets that provide a perfect fit, finish, and seal. Features: OE Gaskets Exhaust Manifold Gasket Set Note: This gasket set is designed for aftermarket and stock exhaust manifolds with a factory sized turbo flange.
BD-Power 1045986-T4 Exhaust Manifold Gasket Kit 23841 1.00 BD-Power 1045986-T4 Exhaust Manifold Gasket Kit
$ 69
The BD-Power 1045986-T4 Exhaust Manifold Gasket Kit provides you with the high quality gaskets needed to install a BD-Power T4 Exhaust Manifold on your 1998.5-2018 Dodge 5.9L and 6.7L Cummins. Features: For BD-Power T4 Manifold High Quality OE Style Gaskets Note: Not for use on stock turbo applications, only fits on T4 manifolds.
BD-Power 1045986-T6 Exhaust Manifold Gasket Kit 23839 1.00 BD-Power 1045986-T6 Exhaust Manifold Gasket Kit
$ 69
The BD-Power 1045986-T6 Exhaust Manifold Gasket Kit provides you with the high quality gaskets needed to install a BD-Power T6 Exhaust Manifold on your 1998.5-2018 Dodge 5.9L and 6.7L Cummins. Features: For BD-Power T6 Manifold High Quality OE Style Gaskets Note: Not for use on stock turbo applications, only fits on T6 manifolds.
BD-Power 1045995-T4 Ported T4 Exhaust Manifold 23842 24.00 BD-Power 1045995-T4 Ported T4 Exhaust Manifold
5 5 1
$ 545
The BD-Power 1045995-T4 Ported T4 Exhaust Manifold for your 1998.5-2018 Dodge 6.7L Cummins features a larger runner sizes for enhanced flow and a T4 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Features: T4 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T4 turbocharger. Replacement bolts and gaskets not included.
BD-Power 1045995-T6 Ported T6 Exhaust Manifold 23840 24.00 BD-Power 1045995-T6 Ported T6 Exhaust Manifold
$ 545
The BD-Power 1045995-T6 Ported T6 Exhaust Manifold for your 1998.5-2018 Dodge 5.9L/6.7L Cummins features a larger runner sizes for enhanced flow and a T6 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Features: T6 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T6 turbocharger. Replacement gaskets and manifold bolts are not included.
BD-Power 1045996-T4 Wastegated Ported Exhaust Manifold 26813 26.00 BD-Power 1045996-T4 Wastegated Ported Exhaust Manifold
$ 615
The BD-Power 1045996-T4 Wastegated Ported Exhaust Manifold for your 1998.5-2018 Dodge 5.9L/6.7L Cummins features a larger runner size for enhanced flow and a T4 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Wastegated manifold is machined for use with Turbo Smart 45mm Hyper Gate (not included). Wastegate block-off plate and clamp provided. Features: T4 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Wastegate Block-Off Plate and Clamp Included Machined For Use w/ Turbo Smart 45mm Hyper Gate (not included) Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T4 turbocharger. Replacement gaskets and manifold bolts not included.
BD-Power 1045996-T6 Wastegated Ported Exhaust Manifold 26814 27.00 BD-Power 1045996-T6 Wastegated Ported Exhaust Manifold
$ 615
The BD-Power 1045996-T6 Wastegated Ported Exhaust Manifold for your 1998.5-2018 Dodge 5.9L/6.7L Cummins features a larger runner size for enhanced flow and a T6 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Wastegated manifold is machined for use with Turbo Smart 45mm Hyper Gate (not included). Wastegate block-off plate and clamp provided. Features: T6 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Wastegate Block-Off Plate and Clamp Included Machined For Use w/ Turbo Smart 45mm Hyper Gate (not included) Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T6 turbocharger. Replacement gaskets and manifold bolts not included.
Cometic C5726-040 MLS Exhaust Manifold Gasket 30507 2.00 Cometic C5726-040 MLS Exhaust Manifold Gasket
$ 44.76
The Cometic C5726-040 MLS Exhaust Manifold Gasket for your 1998.5-2007 Dodge 5.9L Cummins is a direct replacement for your old damaged exhaust manifold gaskets. The Cometic MLS Gaskets are comprised of multiple embossed layers of both viton coated and uncoated stainless steel. The embossed outer layers of the gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. This design requires less clamp load creating less bore distortion and conforms load distribution across the sealing area. Turbo flange gasket not included. Features: Maintains A Torque Set No Sealants Are Required Wont Burn Through or Push Out Kit Contains: (2) .040" MLS 3-Port Gaskets
Dorman 674-602 Exhaust Manifold 29261 21.00 Dorman 674-602 Exhaust Manifold
$ 153.95
The Dorman 674-602 Exhaust Manifold for your 1998.5-2002 Dodge 5.9L Cummins gives you an affordable solution to replacing the old cracked or damaged manifold on your 5.9L Cummins. More like a kit than a single part, Dorman exhaust manifolds include the needed hardware for an easier installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Features: Direct Fit Stock Replacement Replaces Chrysler OE Part#: 5014170AC, 5014170AD Note: Turbo flange gasket not included.
MAHLE MS19225 Exhaust Manifold Gasket Set 25651 1.00 MAHLE MS19225 Exhaust Manifold Gasket Set
$ 10.01
The MAHLE MS19225 Exhaust Manifold Gasket Set for your 1998.5-2017 Dodge 5.9L/6.7L Cummins is a direct replacement gasket set for your exhaust manifold. This set includes 6 gaskets for exhaust manifold to cylinder head mating surfaces. Turbocharger mounting gasket not included. Features: "OE Style" - Direct Replacement Sold As Set Of 6