The Mean Green 1398 High Output Alternator for your 2003-2007 Dodge 5.9 Cummins is the answer to all of your charging problems. The Mean Green Alternator provides up to 300% more power than stock. The Mean Green Alternator can charge any engine no matter what its' power requirements.
The Mean Green Alternator's tool steel rotorshaft is supported at both ends by heavy duty double sealed bearings. Even the heavy duty solid copper starter windings are sealed with high temperature insulation. That's one reason Mean Green include a 1 year Warranty at no charge on every alternator.
Special new castings permit use of stock bracketry and bolt hole locations. Even the stock wiring harness can be used for easy plug in. Designed to out last and out perform any other unit. Great for use in ambulances, tow trucks, motorhomes or vehicles with off road lights, winches, stereo systems or other power accessories.
Up to 300% More Charging Power
300,000 Mile Life Expectancy
1 Year Unconditional Guarantee
Precision Balanced for Smooth Operation
220 AMP Output
No Core Required
Mean Green Gear Reduction Starter 7892733425.00
The Mean Green Gear Reduction Starter is the answer to all of your starter problems. The Mean Green Starter provides 100% more torque than an overweight stock starter. With a 4.4 to 1 gear reduction, roller bearing support, and an integrated solenoid, the Mean Green Starter can crank any engine no matter how high its static compression.
1/3 Smaller Than Stock
100% More Cranking Power
300,000 Mile Life Expectancy
No More Hot Start Problems
2 Year Unconditional Guarantee
No Core Required
The Mean Green Starter's 3" tool steel driveshaft is supported at both ends by bearings. The stainless steel pinion shaft is externally splined to mate with the larger diameter, internally splined driveshaft. Even the armature in the high-speed motor is supported at each end with bearings. All totaled, there are five bearings in the motor and gear assembly. That's one reason we include a 2-year Warranty at no charge on every starter, (Commercial and Racing applications carry a 1-year warranty). Another is the heat resistant, integrated solenoid which continues to operate even at extreme temperatures.
Mean Green Starter's are compact in design to provide additional oil pan and header clearance. The starters for Ford and AMC/Jeep applications can be rotated in 20' increments to allow for better header clearance. The GM starters have dual bolt patterns for both the 12 3/4" (153 tooth) and 14" (168 tooth) flywheels.
Installation Note: On some trucks you may have to "notch" the factory engine mount bracket for the starter to clear.
XDP Wrinkle Black HD Gear Reduction Starter XD2583403419.00
You can rely on the XDP Wrinkle Black HD Gear Reduction Starter XD258 to get your 2003-2006 Dodge 5.9L Cummins running in the most extreme environments. XDP's HD Gear Reduction Starters are faster, stronger, and more durable than your factory starter. This gives you the ability to turn over even the most aggressive diesel engines.
XDP's HD Gear Reduction Starters feature a smaller motor that is faster, more efficient, and draws less amperage. The Gear Reduction Design produces more torque than a factory unit, at about a third of the size. This not only reduces weight, but also makes a more compact design for easier installation. Each starter comes pre-tested, ready for installation and features a durable "Wrinkle Black" finish for corrosion resistance and aesthetics.
HD Gear Reduction Design
Wrinkle Black Finish
Made In The USA!
260 Ft-Lbs. Torque
3.75:1 Gear Reduction
Depending on the conditions, a starter can pull up to 500 amps. These levels of amperage stress ALL components in the circuit including cables, terminals, batteries, and more. Problems with these components can be difficult to diagnose as they appear fine at rest and under a light load, but generate high resistance under heavy amperage draws. This results in low voltage to the starter while cranking, causing heavier amperage draw, and increased heat leading to starter failure. Batteries, cables and additional components should be checked and serviced regularly. Voltage measured at the starter during cranking should always be above 9.5V DC. Starter heat shields are not required, but are an excellent idea for heat protection.Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.