Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

CP3 Pumps & Upgrades

New Product Filters!
ATS 7010192272 Twin Fueler Electronic Control Box 34188 0.00 ATS 7010192272 Twin Fueler Electronic Control Box
$ 204.25
The ATS ATS7010192272 Twin Fueler Electronic Control Box for your 2003-2013 Dodge 5.9L/6.7L Cummins controls your second high pressure fuel pump, allowing precise rail pressure control with the Twin Fueler Fuel system. The Twin Fueler Electronic Control Box is a completely Plug and Play installation. Simply connect to your factory fuel control actuator (FCA), connect to the second high pressure pump FCA and supply battery power and ground. This will allow the Twin Fueler pump to control pressure, giving better drive-ability as well as the added power when desired! Features:Easy InstallationFor Use In Dual CP3 SystemsAllows Precise Rail Pressure Control
ATS 7018002272 Twin Fueler Installation Kit 18182 32.00 ATS 7018002272 Twin Fueler Installation Kit
$ 1309.75
Add a Dual CP3 System to your 2003-2004 Dodge 5.9L Cummins with the ATS 7018002272 Twin Fueler Installation Kit. This kit doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fuel lines, and a true twin system, the ATS kit allows for huge amounts of power and reliability. When it comes to optimizing a Common Rail Injection System, rail pressure gets talked about a lot. Pressure is in fact extremely important, however, it is not the only important aspect. Equally, fuel volume is the actual additional amount of fuel you are able to add in to the cylinders during injection. This is going to to have massive impact on your final ability to create power. Ultimately, your truck needs fuel pressure to properly atomize the added fuel volume that you introduce. Not all modified CP3 kits or dual CP3 kits have this capability like the ATS Twin CP3 System does. Additionally, the billet aluminum wheel, is sized proportionally to the factory CP3, allowing better equalization of the rails. Generally, this will not matter so much as the regulators will control the amount of fuel regardless, however, it is attention to detail such as this that sets the ATS kit apart from the others. Features: Increases Fuel Volume Maintains Stock Fuel Pressure Increases Performance Increases Reliability Note: This installation kit is sold without a pump. You must provide the 2nd pump. This kit is designed to us an LBZ/LMM CP3 Pump (GM Part# 97361351). Use of another pump can result in fuel line misalignment.
ATS 7019002272 Twin Fueler Dual Pump Kit (With Pump) 4047 42.00 ATS 7019002272 Twin Fueler Dual Pump Kit (With Pump)
5 5 1
$ 2115
The ATS 7019002272 Twin Fueler Dual Pump Kit (With Pump) for the 2003-2004 Dodge 5.9L Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fuel lines, and a true twin system, the ATS kit allows for huge amounts of power and reliability. When it comes to optimizing a Common Rail Injection System, rail pressure gets talked about a lot. Pressure is in fact extremely important, however, it is not the only important aspect. Equally, fuel volume is the actual additional amount of fuel you are able to add in to the cylinders during injection. This is going to to have massive impact on your final ability to create power. Ultimately, your truck needs fuel pressure to properly atomize the added fuel volume that you introduce. Not all modified CP3 kits or dual CP3 kits have this capability like the ATS Twin CP3 System does. Additionally, the billet aluminum wheel, is sized proportionally to the factory CP3, allowing better equalization of the rails. Generally, this will not matter so much as the regulators will control the amount of fuel regardless, however, it is attention to detail such as this that sets the ATS kit apart from the others. Features: Increases fuel volume Maintains stock fuel pressure Increases performance Increases reliability Everything's included for easy installation
BD-Power 1050105 Remanufactured CP3 Pump 19769 14.00 BD-Power 1050105 Remanufactured CP3 Pump
$ 659
The BD-Power 1050105 CP3 pump is remanufactured to BD-Power's stringent specifications for your 2003-2007 Dodge 5.9L Cummins. This pump is offered as a drop-in replacement for your factory CP3. BD Diesel is one of only a few shops with the capability, the know-how and equipment to fully test and rebuild common rail injection components including high pressure CP3 pumps. Features: Remanufactured Pre-Tested Before Shipping Stock HP Level - Factory Replacement
BD-Power 1050551 R900 12MM CP3 Pump 20674 14.00 BD-Power 1050551 R900 12MM CP3 Pump
$ 2059
The BD-Power 1050551 R900 12MM CP3 Pump will increase performance in your 2003-2018 Dodge 5.9L/6.7L Cummins. Featuring up to a 72% increase in capacity / displacement, this pump delivers enough fuel to support up to 750hp while maintaining 24,000psi of rail pressure. The R900 pump replaces the existing injection pump and simply bolts in place to produce up to 5.25 LPM versus the stock 3.05 LPM. That's right, all that fuel without going to a dual pump system no extra pulleys, belts or pumps to install. BDs R900 pumps are engineered with an enhanced metering unit and new design cam shaft with modified plungers and stroke. Plus, the HPCPS eliminates the off throttle fuel spikes common with stock pumps that can potentially damage injector nozzle tips when trying to produce more than 500hp. All of these modifications deliver long-term durability with consistent high fuel pressure supply on demand that provides efficient atomization resulting in more power, better combustion and lower EGTs. Designed for street, towing and race track applications, each R900 injection pump is fully tested before leaving our facility Features: Support Up To 750HP Maintains Steady Rail Pressure 12mm Stroke Cam Housing Design
Bostech HPP7304 Remanufactured CP3 Pump 13147 10.00 Bostech HPP7304 Remanufactured CP3 Pump
$ 619.95
Replace the failing CP3 pump in your 2003-2007 Dodge 5.9L Cummins with the Bostech HPP7304 Remanufactured CP3 Pump. Bostech CP3's are remanufactured to stringent specifications. Each unit is 100% inspected and tested for quality and performance. Features: Remanufactured Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part#: 191780AA, 50104877A, 5143425AA, 5191780AA, 0-445-020-039, 0-445-020-147, 0 986 437 304
DDP CP3-304 Remanufactured CP3 Pump 34398 18.00 DDP CP3-304 Remanufactured CP3 Pump
$ 774.25
Restore proper operation to the fuel system in your 2003-2007 Dodge 5.9L Cummins with the DDP CP3-304 Remanufactured CP3 Pump. DDP’s CP3 pumps are remanufactured to the highest standards and are backed by a 1-year, unlimited mileage warranty.Features:Remanufactured Stock Replacement1-Year Unlimited Mileage Warranty
DDP NCP3-304 New CP3 Pump 34399 18.00 DDP NCP3-304 New CP3 Pump
$ 1330
Replace the failed factory CP3 injection pump in your common rail 2003-2007 Dodge 5.9L Cummins with a DDP NCP3-304 New CP3 Pump. This brand new CP3 pump comes ready to install and is backed by DDP's 2-year unlimited mileage warranty! Features:New Stock CP3No Core Required2-Year Unlimited Mileage Warranty
DDP NCP3-30412 12mm Stroker CP3 Pump 31185 18.00 DDP NCP3-30412 12mm Stroker CP3 Pump
$ 2470
Maximize the power and capability of the fuel system in your 2003-2007 Dodge 5.9L Cummins with the DDP NCP3-30412. Capable of supporting up to 1,000 rwhp with supporting modifications, this CP3 pump provides full fuel delivery to 6,000+ RPM. Each pump includes a new OEM unmodified FCA for improved tunability. 90-day limited warranty. Features: 12mm Stroker PumpNew, Not RemanufacturedSupports Up To 1,000 RWHP75% More Volume Than Stock Unmodified FCA For Improved Tunability 90-Day Limited Warranty Application Notes: The pump supplied is a 6.7L based pump and will require minor modifications if being used with factory fuel lines. A 150GPH Lift Pump can be used but a 200+ GPH lift pump is recommended for for maximum output.
DTech DT590003R Remanufactured CP3 Pump 5365 17.00 DTech DT590003R Remanufactured CP3 Pump
$ 579.6
The DTech DT590003R Remanufactured CP3 Pump for your 2003-2007 Dodge 5.9L Cummins is remanufactured to stringent specifications to ensure performance, and reliability. Features: Stock Output Remanufactured Direct Replacement Cross Reference Numbers: 5143425AA, DT5143425R, R5143425AA DTech Warranty: Consumer/Non-Professional Installers - 1 Year, Unlimited Mileage Warranty. Professional Shop / Automotive Truck Installers - 2 Years, Unlimited Mileage Warranty. This warranty applies to product used under normal operating conditions and service. Repairs, modification, disassembly or any other alteration of DTech products from their original condition are not covered by this warranty. Warranty will not be extended to failures caused by incorrect installation or application, modification, contamination, negligence or abuse. The warranty does not extend to diagnostic time, incidental or consequential damages.
Fleece 5.9L CP3K Modified CP3 Pump 20142 18.00 Fleece 5.9L CP3K Modified CP3 Pump
$ 1179
The Fleece Performance Cummins 5.9L CP3K is a modified CP3 pump designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range. Features: Eliminates Factory Fuel Flow Restriction Maintains Rail Pressure Through Entire RPM Range
Fleece FPE-34211 Dual Pump Pulley 31561 3.00 Fleece FPE-34211 Dual Pump Pulley
$ 189.05
The Fleece FPE-34211 Dual Pump Pulley for your Dodge Cummins is designed to be used with the Fleece Dual Pump Bracket. Features: Dual CP3 Pulley For Use With Fleece Dual Pump BracketColor Options:FPE-34211-BLKFPE-34211-BLUFPE-34211-ORGFPE-34211-RED
Fleece FPE-34211 Dual Pump Spoke Pulley 34776 3.00 Fleece FPE-34211 Dual Pump Spoke Pulley
$ 219
The Fleece FPE-34211 Dual Pump Spoke Pulley is designed for use on your 2003-2016 Dodge 5.9L/6.7L Cummins with the Fleece Dual Pump Bracket. This Pulley is specially machined with a spoke design and is ready for use in your dual pump setup. Features:Dual CP3 PulleyFor Use With Fleece Dual Pump BracketColor Options:FPE-34211-BLK-SPK - BlackFPE-34211-BLU-SPK - Blue FPE-34211-ORG-SPK Orange FPE-34211-RED-SPK - Red
Fleece FPE-34610-PC Dual CP3 Pump Bracket and Mounting Hardware 36018 6.00 Fleece FPE-34610-PC Dual CP3 Pump Bracket and Mounting Hardware
$ 94.99
Easily mount your Dual Pump from Fleece in your 2003-2007 Dodge 5.9L Cummins with the Fleece FPE-34610-PC Dual CP3 Pump Bracket and Mounting Hardware. The Bracket and Mounting Hardware comes with a mounting bracket that is coated in a sleek black finish for an awesome look. Installing the Bracket and Mounting Hardware is simple because all the bolts and nuts need to get the job done are included.Features:Incredibly DurableCustom AppearanceIncludes All Necessary Bolts and Nuts
Fleece FPE-CUMM-CP3-10MM-5.9 PowerFlo 750 CP3 23749 18.00 Fleece FPE-CUMM-CP3-10MM-5.9 PowerFlo 750 CP3
$ 1895
The Fleece Cummins FPE-CUMM-CP3-10MM-5.9 PowerFlo 750 CP3 for your 03-07 Dodge 5.9L Cummins is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range, as well as provide enough fuel to support 750rwhp. Every Fleece Performance CP3 is tested on our in-house engine simulator and pump test stand to simulate real world situations and ensure that each pump is ready to work for you!" Features: Supports 750 RWHP Eliminates Factory Fuel Flow Restriction
Fleece FPE-DPK-59-10 Dual Pump Kit (With PowerFlo 750) 42673 13.00 Fleece FPE-DPK-59-10 Dual Pump Kit (With PowerFlo 750)
$ 2699
The Fleece FPE-DPK-59-10 Dual Pump Kit (With PowerFlo 750) will supply your 2003-2007 Dodge 5.9L Cummins with the fuel necessary to optimize the performance of your Cummins engine. This kit is not only a simple and clean upgrade and eliminates the need for a costly dual pump controller, which is needed with other kits.The kit was created to fit perfectly and comes with everything you need to get the job done correctly.The Fleece Performance PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications in just a single configuration. Not only will a single PowerFlo 750 pump support 750 RWHP, but it also removes the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which results in lost horsepower when its most necessary. This efficient upgrade will allow you to control desired fuel rail pressure through your entire RPM range.Features:Perfect FitEasy InstallIncreased Engine PerformancePart Options:Fleece FPE-DPK-59-10-BLK BlackFleece FPE-DPK-59-10-RD RedFleece FPE-DPK-59-10-BLU BlueFleece FPE-DPK-59-10-ORG Orange
Fleece FPE-DPK-59-10-DX Deluxe Dual Pump Kit (With PowerFlo 750) 42676 13.00 Fleece FPE-DPK-59-10-DX Deluxe Dual Pump Kit (With PowerFlo 750)
$ 2999
The Fleece FPE-DPK-59-10-DX Deluxe Dual Pump Kit (With PowerFlo 750) Pump will supply your 2003-2007 Dodge 5.9L Cummins with the fuel needed to increase the performance of your Cummins engine. The kit is designed to fit perfectly and comes with everything included to complete the job correctly the first time. This kit is not only a simple and clean install, it also eliminates the need for an expensive dual pump controller, which is required with other kits.The Fleece Performance PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications in just a single configuration. Not only will a single PowerFlo 750 pump support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump, it’s costing you fuel flow and rail pressure after 3000 RPM, which results in lost horsepower when you need it the absolute most. This cost-effective improvement will allow you to maintain desired fuel rail pressure through your entire RPM range.The Deluxe Kit has the Fleece Performance Fuel Distribution Block, and Fleece Fuel Distribution Block Hose and Fitting kit. This allows you to re-plumb your fuel system to get rid of unnecessary lines, and give you an even cleaner, custom look.Features:Perfect FitEasy InstallIncreased Engine PerformancePart Options:Fleece FPE-DPK-59-10-DX-BLK BlackFleece FPE-DPK-59-10-DX-RD RedFleece FPE-DPK-59-10-DX-BLU BlueFleece FPE-DPK-59-10-DX-ORG Orange
Fleece FPE-DPK-59-3K Dual Pump Kit (With CP3K) 42672 13.00 Fleece FPE-DPK-59-3K Dual Pump Kit (With CP3K)
$ 1999
The Fleece FPE-DPK-59-3K Dual Pump Kit (With CP3K) for your your 2003-2007 Dodge 5.9L Cummins is a simple and clean install that eliminates the need for an expensive dual pump controller, which is required with other kits. Painstakingly engineered to fit perfectly, this kit has everything you need to get the job done right the first time and will give your truck the fuel needed to get the best out of your Cummins engine.The Fleece Performance Cummins 5.9L CP3K is a modified CP3 pump designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This upgraded pump will allow you to maintain desired fuel rail pressure through your entire RPM range.Features:Perfect FitEasy InstallIncreased Engine PerformancePart Options:Fleece FPE-DPK-59-3K-BLK BlackFleece FPE-DPK-59-3K-RD RedFleece FPE-DPK-59-3K-BLU BlueFleece FPE-DPK-59-3K-ORG Orange
Fleece FPE-DPK-59-3K-DX Deluxe Dual Pump Kit (With CP3K) 42675 13.00 Fleece FPE-DPK-59-3K-DX Deluxe Dual Pump Kit (With CP3K)
$ 2299
Fleece FPE-DPK-59-3K-DX Deluxe Dual Pump Kit (With CP3K) is a kit that is created to fit perfectly on your 2003-2007 Dodge 5.9L Cummins and includes everything you need to get the job done right the first time. This kit is a straight forward install and eliminates the requirement for an expensive dual pump controller like other kits. The Dual Pump Kit will supply your truck with the fuel needed to expand the performance of your Cummins engineThe Deluxe Kit includes the Fleece Performance Fuel Distribution Block, and Fleece Fuel Distribution Block Hose and Fitting kit. This allows you to re-plumb your fuel system to get rid of unnecessary lines, and give you an even cleaner, custom look.If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. The Fleece Performance Cummins 5.9L CP3K is a modified CP3 pump designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. This upgraded pump will allow you to maintain desired fuel rail pressure through your entire RPM range.Features:Perfect FitEasy Install Increased Engine PerformancePart Options:Fleece FPE-DPK-59-3K-DX-BLK BlackFleece FPE-DPK-59-3K-DX-RD RedFleece FPE-DPK-59-3K-DX-BLU BlueFleece FPE-DPK-59-3K-DX-ORG Orange
Fleece FPE-DPK-59-NP Dual Pump Kit (Without Pump) 42671 13.00 Fleece FPE-DPK-59-NP Dual Pump Kit (Without Pump)
$ 999
The Fleece FPE-DPK-59-NP Dual Pump Kit (Without Pump) will supply your 2003-2007 Dodge 5.9L Cummins with the fuel needed to get the best performance out of your engine, all you need is the pump. This kit is engineered to fit perfectly and comes with everything you needed accomplish the job correctly the first time. This kit is not only an easy install, it also gets rid of the need for a costly dual pump controller, which is required with other kits on the market.Features:Perfect FitEasy Install Increased Engine PerformancePart Options:FPE-DPK-59-NP-BLK BlackFPE-DPK-59-NP-RD RedFPE-DPK-59-NP-BLU BlueFPE-DPK-59-NP-ORG Orange