Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Aeromotive 11802 130GPH Fuel Pump (Pump Only) 26825 20.00 Aeromotive 11802 130GPH Fuel Pump (Pump Only)
$ 1062.59
The Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years. Filtration: The Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue. Shaft Seals and Pump Design: Like all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump. Extreme Climates: Aeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat. Fuel Pressure: Unlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess. Features: 130 GPH @ 10 PSI Pump Only (No Installation Kit) Ideal For Custom Applications Note: Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included.
Aeromotive 11806 230GPH Fuel Pump (Pump Only) 29610 20.00 Aeromotive 11806 230GPH Fuel Pump (Pump Only)
$ 1313.77
The Aeromotive 11806 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years. Filtration: The Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue. Shaft Seals and Pump Design: Like all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump. Fuel Pressure: Unlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. Features: Race Pump 230 GPH @ 10 PSI Pump Only (No Installation Kit) Ideal For Custom Applications Note: Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included.
AFE 42-12021 DFS780 Fuel System (Full-Time Operation) 27724 17.00 AFE 42-12021 DFS780 Fuel System (Full-Time Operation)
2 5 1
$ 835.05
The AFE 42-12021 DFS780 Fuel System with Full-Time Operation for your 2003-2004.5 Dodge 5.9L Cummins offers you a complete fuel system solution to replacing the factory lift pump in your Cummins pickup. The fuel in your truck contains contaimants, water and air/vapor which reduces power and can cause damage to your injectors. The AFE DFS780 Fuel System features a patent-pending design capable of removing power-robbing entrained air, water and contaminants. The DFS780 ensures constant availability for your CP3 injection pump, while improving throttle response and horsepower at all RPMs. Clear High-Impact Polycarbonate Sight Glass: Allows visual inspection of fuel. Helical Bronze Spur Gears: Bronze gears more forgiving of contaminants than steel gears. The Helical spur gear design runs quieter than straight cut gears. Billet 6061-T6 Aluminum Manifold: Eliminates porosity concerns with cast aluminum. "Marine Grade" Motor: Protected against dust intrusion and powerful water jets. Horsepower and Flow: The DFS780 can be used on a totally stock truck, it was engineered for modified vehicles. BSFC (Brake Specific Fuel Consumption) for most modern turbocharged diesel engines is about 0.36 lbs/HP/hr. Since #2 diesel weighs about 7 pounds/gallon, which gives us about 19.5 HP/gallon/hr. The DFS780 will flow enough fuel (at rated pressure) to support over 2000 HP. Plug and Play Installation: Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required. Vehicle can easily be returned to stock. Relay Controlled: The DFS780 is powered by your ignition and can be run independently or in parallel with the stock fuel pump. PEEK Bearing Wear Surfaces: The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear. Contoured CNC Machining Of Manifold Passages: Enhances flow through the manifold to reduce pressure drop due to flow restrictions. Direct Bolt-on Steel Mounting Bracket: Heavy duty bracket mounts to the frame and utilizes existing hole to secure. Fuel Pressure Gauge Port: 1/8 NPT port allows customer to attach an external pressure gauge to monitor fuel pressure. O.E Quality Viton Seals: Compatible with diesel and biodiesel fuels. Features: Bypasses OE Fuel Pump (Full-Time Operation) "Worry Free" 2 Year Warranty Built In The U.S.A
AFE 42-22013 DFS780 Pro Series Fuel Pump (Full-time Operation) 43373 16.30 AFE 42-22013 DFS780 Pro Series Fuel Pump (Full-time Operation)
$ 645.05
Filter dirt, water, and debris from the fuel in your 2003-2004 Dodge 5.9L Cummins with the AFE 42-22013 DFS780 Pro Series Fuel Pump. The high efficiency fuel filter on the Pro Series Fuel Pump is made from clear glass which makes visual inspection simple. A reusable water separator bowl collects water filtered from the fuel for monitoring and is easily emptied. Easily installed, the Pro Series Fuel Pump filters out water, contaminants, and air from your fuel, so your engine is always getting a consistent flow of the highest quality fuel possible. The Pro Series Fuel Pump is constructed from quality cast aluminum for increased durability and performance. Features:Easily InstalledQuality ConstructionCreates More Consistent Fuel FlowRemoves Dirt, Water, and Debris From Fuel
AFE 42-30001 DFS780 Max Universal Fuel Pump (10-20 PSI) 43378 14.00 AFE 42-30001 DFS780 Max Universal Fuel Pump (10-20 PSI)
$ 455.05
Add a lift pump to your vehicle that can process 187 GPH when you pick up the AFE 42-30001 DFS780 Max Universal Fuel Pump (10-20 PSI). The Max Universal Fuel Pump features a high-pressure Viton seal, CNC machined manifold passages and heavy gauge wire harness to ensure improved throttle response. The Max Universal Fuel Pump has an externally adjustable pressure regulator to adjust output pressure (10-20 psi) and a built-in pressure port to easily measure fuel pressure. Installing the Max Universal Fuel Pump is simple and convenient with plug-n-play connections, rivet nuts and installation tool and requires no cutting or modifications to the stock fuel lines or fuel tank. Features:Easily InstalledQuality ConstructionImproved Throttle ResponseCreates More Consistent Fuel FlowDelivers Up To 187 Gallons Per Hour
AirDog A4SPBD001 100GPH Air/Fuel Separation System 27407 27.00 AirDog A4SPBD001 100GPH Air/Fuel Separation System
$ 599
The PureFlow AirDog A4SPBD001 100GPH Air/Fuel Separation System for your 1998.5-2004 Dodge 5.9L Cummins provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 100 GPH @ 15-17 PSI (Stock-500HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty Application Note: This kit is designed for use on trucks that have the factory pump in the factory location. If your truck has the retro-fitted in-tank pump you must use the A4SPBD353 kit. (see related products below)
AirDog A4SPBD004 150GPH Air/Fuel Separation System 27416 27.00 AirDog A4SPBD004 150GPH Air/Fuel Separation System
5 5 1
$ 624
The PureFlow AirDog A4SPBD004 150GPH Air/Fuel Separation System for your 1998.5-2004 Dodge 5.9L Cummins provides the most effective technology designed specifically to remove water, particulates, vapor and entrained air from the diesel fuel in your truck. The AirDog is a lift pump and filtration system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine from producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 150 GPH @ 15-17 PSI (Stock-800HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty
AirDog A4SPBD353 100GPH Air/Fuel Separation System 27408 27.00 AirDog A4SPBD353 100GPH Air/Fuel Separation System
$ 599
The PureFlow AirDog A4SPBD353 100GPH Air/Fuel Separation System for your 1998.5-2004 Dodge 5.9L Cummins provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 100 GPH @ 15-17 PSI (Stock-500HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty Application Note: This kit is designed for use on trucks that have had the in-tank fuel pump retro-fit. If your stock pump is not in the tank, you would use the A4SPBD001 kit. (see related products below)
AirDog II-4G A6SABD028 DF-200-4G Air/Fuel Separation System 30652 27.00 AirDog II-4G A6SABD028 DF-200-4G Air/Fuel Separation System
$ 769
The PureFlow AirDog II-4G A6SABD028 DF-200-4G Air/Fuel Separation System for your 1998.5-2004 Dodge 5.9L Cummins is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDog® is proud to announce that the AirDog II-4G® is the quietest fuel system in the diesel market! Features: Preset @ 15-17 PSI Supports 800HP+ Flows 200 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SABD425 DF-165-4G Air/Fuel Separation System 24693 27.00 AirDog II-4G A6SABD425 DF-165-4G Air/Fuel Separation System
$ 739
The PureFlow AirDog II-4G A6SABD425 DF-165-4G Air/Fuel Separation System for your 1998.5-2004 Dodge 5.9L Cummins is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDog® is proud to announce that the AirDog II-4G® is the quietest fuel system in the diesel market! Features: Preset @ 15-17 PSI Supports 500HP-800HP Flows 165 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SPBD253 DF-100-4G Air/Fuel Separation System 30660 27.00 AirDog II-4G A6SPBD253 DF-100-4G Air/Fuel Separation System
$ 699
The PureFlow AirDog II-4G A6SPBD253 DF-100-4G Air/Fuel Separation System for your 1998.5-2004 Dodge 5.9L Cummins is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDog® is proud to announce that the AirDog II-4G® is the quietest fuel system in the diesel market! Features: Preset @ 15-17 PSI Supports Stock - 500HP Flows 100 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration Note: For use on trucks without in-tank lift pump. If your truck has been retrofitted to the in-tank pump, please see related item A6SPBD354 below.
AirDog II-4G A6SPBD354 DF-100-4G Air/Fuel Separation System 30669 27.00 AirDog II-4G A6SPBD354 DF-100-4G Air/Fuel Separation System
5 5 1
$ 699
The PureFlow AirDog II-4G A6SPBD354 DF-100-4G Air/Fuel Separation System for your 1998.5-2004 Dodge 5.9L Cummins is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogĀ® is proud to announce that the AirDog II-4GĀ® is the quietest fuel system in the diesel market! Features: Preset @ 15-17 PSI Supports Stock - 500HP Flows 100 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration Note: For trucks with factory retro-fit in-tank fuel pump. If your truck does not have an in-tank fuel pump, please see part# A6SPBD253 in the related items below.
AirDog R4SBD324 Raptor 4G 100GPH Pump 33661 17.00 AirDog R4SBD324 Raptor 4G 100GPH Pump
$ 439
Upgrade the fuel system in your 2003-2004 Dodge 5.9L Cummins with the PureFlow AirDog R4SBD324 Raptor 4G 100GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 100 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 15-17 PSI) Note: For use on trucks without in-tank pump.
AirDog R4SBD325 Raptor 4G 150GPH Pump 33662 17.00 AirDog R4SBD325 Raptor 4G 150GPH Pump
$ 455
Upgrade the fuel system in your 2003-2004 Dodge 5.9L Cummins with the PureFlow AirDog R4SBD325 Raptor 4G 150GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 150 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 15-17 PSI) Note: For use on trucks without in-tank fuel pump.
AirDog R4SBD356 Raptor 4G 100GPH Pump 33639 17.00 AirDog R4SBD356 Raptor 4G 100GPH Pump
$ 439
Upgrade the fuel system in your 2003-2004 Dodge 5.9L Cummins with the PureFlow AirDog R4SBD356 Raptor 4G 100GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 100 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 15-17 PSI) Application Note: This pump is designed for use on trucks that have had the in-tank retrofit of their factory fuel pump. If your stock pump is still located on the engine you must use the R4SBD324 Raptor Pump (see related items).
AirDog R4SBD361 Raptor 4G 150GPH Pump 33638 17.00 AirDog R4SBD361 Raptor 4G 150GPH Pump
$ 455
Upgrade the fuel system in your 2003-2004 Dodge 5.9L Cummins with the PureFlow AirDog R4SBD361 Raptor 4G 150GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 150 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 15-17 PSI) Application Note: This pump is designed for use on trucks that have had the in-tank retrofit of their factory fuel pump. If your stock pump is still located on the engine you must use the R4SBD325 Raptor Pump (see related items).
BD-Power 1050226 Auxiliary Lift Pump 721 4.00 BD-Power 1050226 Auxiliary Lift Pump
2.75 5 4
$ 365
The BD-Power 1050226 Auxiliary Lift Pump for your 1998.5-2007 Dodge 5.9L Cummins is designed to help support your existing fuel pump. Perfect for applications where extra fuel is needed for stock to moderate applications. This pump installs inline and assists your factory pump. Features:"Supports" Factory Lift Pump Great For Lightly Modified and Stock Applications XDP TIP:This pump is designed to work with your existing lift/transfer pump on the motor. This pump reads pressure though a pressure switch that comes with the kit, and is designed to turn on when it reaches a certain pressure. This pump is good if you have a good lift/transfer pump already and your just looking for a little added security. If your lift/transfer pump on your truck is bad now you should look into the OEM bypass kit.
BD-Power 1050227 OEM Bypass Lift Pump 895 4.00 BD-Power 1050227 OEM Bypass Lift Pump
5 5 3
$ 365
The BD-Power 1050227 OEM Bypass Lift Pump for your 2003-2004 Dodge 5.9L Cummins is a replacement pump for the weak factory lift pump that is a common failure item on Dodge Ram Pickups. The OEM Bypass pump installs by removing your factory lift pump from the fuel filter housing and relocating it onto the frame, away from all the harsh vibrations of the mighty Cummins engine. This pump is best served as a stock replacement for stock to modified trucks around 50-100hp increase. Features:For Stock and Lightly ModifiedBypasses OEM Lift Pump XDP TIP:This is the pump you should go with if your stock pump has went bad. It is designed to bypass/eliminate the use of the stock pump on the motor. The way this pump works is it mounts on the frame rail w/ the supplied hardware and wiring harness that plugs directly into your factory harness. This kit mounts on the frame because it's easier for the pump to push fuel rather than pull it from the tank and the vibrations from the motor shorten the life of the pump when it's mounted on the engine. If your stock pump is still good and your just looking for a little added security you should look into the auxiliary pump.
BD-Power 1050231 OEM Replacement Lift Pump 28434 4.00 BD-Power 1050231 OEM Replacement Lift Pump
$ 365
The BD-Power 1050231 OEM Replacement Lift Pump is a stock replacement for your 2003-2004.5 Dodge 5.9L Cummins. This pump is designed to bolt in-place of your failed factory lift pump. This OE replacement is intended for use on stock applications. Features: Bolt-On Replacement Stock Flow Rating / Stock Output Note: This pump is for the factory location behind the fuel filter housing. It is not a replacement for trucks that have had the in-tank retrofit done by Chrysler.
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.