Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Alliant AP0058 Intake Grid Heater Gasket Set 25303 1.00 Alliant AP0058 Intake Grid Heater Gasket Set
$ 11.93
The Alliant AP0058 Intake Grid Heater Gasket Set for your 1989-2007 Dodge 5.9L Cummins is a direct replacement for your factory gasket. These are used at the connections between the intake elbow, grid heater and intake manifold on the applications listed below. Alliant Power recommends replacing this gasket anytime these components are removed (i.e. during fuel injection pump replacement). Applications with no grid heater will require the use of only one of the supplied gaskets while applications with a grid heater will require the use of both. Features: OE Quality Direct Replacement AP Part # Year Range Application OEM Part # AP0058 1989-1998 5.9L Cummins 12-Valve 3969988 1998.5-2002 5.9L Cummins w/ VP44 2003-2007 5.9L Cummins Common Rail
BD-Power 1045986 Exhaust Manifold Gasket Set 33031 2.00 BD-Power 1045986 Exhaust Manifold Gasket Set
$ 71
The BD-Power 1045986 Exhaust Manifold Gasket Set gives you the necessary gasket to install an exhaust manifold on your 1998.5-2007 Dodge 5.9L Cummins. This kit features OE gaskets that provide a perfect fit, finish, and seal. Features: OE Gaskets Exhaust Manifold Gasket Set Note: This gasket set is designed for aftermarket and stock exhaust manifolds with a factory sized turbo flange.
BD-Power 1045986-T4 Exhaust Manifold Gasket Kit 23841 1.00 BD-Power 1045986-T4 Exhaust Manifold Gasket Kit
$ 71
The BD-Power 1045986-T4 Exhaust Manifold Gasket Kit provides you with the high quality gaskets needed to install a BD-Power T4 Exhaust Manifold on your 1998.5-2018 Dodge 5.9L and 6.7L Cummins. Features: For BD-Power T4 Manifold High Quality OE Style Gaskets Note: Not for use on stock turbo applications, only fits on T4 manifolds.
BD-Power 1045986-T6 Exhaust Manifold Gasket Kit 23839 1.00 BD-Power 1045986-T6 Exhaust Manifold Gasket Kit
$ 71
The BD-Power 1045986-T6 Exhaust Manifold Gasket Kit provides you with the high quality gaskets needed to install a BD-Power T6 Exhaust Manifold on your 1998.5-2018 Dodge 5.9L and 6.7L Cummins. Features: For BD-Power T6 Manifold High Quality OE Style Gaskets Note: Not for use on stock turbo applications, only fits on T6 manifolds.
Bostech GK03928K Valve Cover Gasket & Harness Kit 28527 2.00 Bostech GK03928K Valve Cover Gasket & Harness Kit
$ 139.95
The Bostech GK03928K Valve Cover Gasket and Harness Kit is an OE replacement for your 2007-2018 Dodge 5.9L and 6.7L Cummins. Bostech's harnesses and components are made from the best materials, using the same attention to quality as the OEM, without the OEM prices. Features: OE Replacement Replaces OEM Part# 5179091AC 13 Month Unlimited Mileage Warranty
Bostech ISK116 Injector Seal Kit 32540 1.00 Bostech ISK116 Injector Seal Kit
$ 4.95
Reaseal the injectors in your 2003-2007 Dodge 5.9L Cummins with the Bostech ISK116 Injector Seal Kit. Each kit includes the necessary seals to replace (1) injector. Bostech seals and gaskets are manufactured from high quality materials for OE quality performance and service life. Features: Stock Replacement 13 Month Unlimited Mileage Warranty
Cometic C5597-061 MLX Head Gasket 30513 5.00 Cometic C5597-061 MLX Head Gasket
$ 211.01
The Cometic C5597-061 MLX Head Gasket for your 2003-2007 Dodge 5.9L Cummins is comprised of multiple layers of stainless steel due to it's increased strength, ability to rebound and resistance to corrosion. The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber based material that is heat resistant to 250C /482F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is an uncoated stainless steel layer that is folded back upon itself to create the locking portion of the bore seal. MLX Head Gasket Highlights: Incorporates a locking bore seal for even greater cylinder sealing potential Provide maximum sealing performance for today's high output engines and requires no sealants Great for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials. No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion Features: MLX Construction .061" Thickness 4.100 Bore
Cometic C5726-040 MLS Exhaust Manifold Gasket 30507 2.00 Cometic C5726-040 MLS Exhaust Manifold Gasket
$ 44.76
The Cometic C5726-040 MLS Exhaust Manifold Gasket for your 1998.5-2007 Dodge 5.9L Cummins is a direct replacement for your old damaged exhaust manifold gaskets. The Cometic MLS Gaskets are comprised of multiple embossed layers of both viton coated and uncoated stainless steel. The embossed outer layers of the gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. This design requires less clamp load creating less bore distortion and conforms load distribution across the sealing area. Turbo flange gasket not included. Features: Maintains A Torque Set No Sealants Are Required Wont Burn Through or Push Out Kit Contains: (2) .040" MLS 3-Port Gaskets
Cometic PRO3003T StreetPro Top End Gasket Kit 30501 10.00 Cometic PRO3003T StreetPro Top End Gasket Kit
$ 404.42
The Cometic PRO3003T StreetPro Top End Gasket Kit for your 2003-2007 Dodge 5.9L Cummins provides the necessary gaskets and seals to reseal the top end of your Cummins engine. Protect your engine, time and money with Cometic StreetPro Gasket Kits. Cometic Gasket has spent hundreds of hours of research and development building these kits to make sure each part was built from the best material available and that every needed gasket or seal was included. StreetPro is a race proven line of gasket kits for the street that offers the same proven technology used in championship winning race vehicles around the world. Features and Specs: 4.100 MLX Head Gasket Built From The Best Materials Kit Includes: 4.100" MLX Head Gasket MLS Exhaust Manifold Gasket Pushrod Cover Gasket Turbo Inlet Gasket Valve Stem Seals Valve Cover Gasket Intake Manifold Gasket Intake Grid Gaskets Thermostat Seal O-Ring Kit Fuel Injector Seal Kit
Dorman 615-204 Valve Cover Gasket Kit 29263 1.00 Dorman 615-204 Valve Cover Gasket Kit
$ 169.95
Prevent leaks in your 2006-2018 Dodge 5.9L/6.7L Cummins with the Dorman 615-204 Valve Cover Gasket Kit. This gasket is constructed from high- quality materials for durability against extreme under hood temperatures. A long-lasting, airtight seal is ensured. Features: Direct Fit Oil and Heat Resistant Replaces Chrysler OE Part#: 5179091AA, 5179091AB, 5179091AC
DTech DT590006 Valve Cover Gasket 28065 5.00 DTech DT590006 Valve Cover Gasket
$ 32.64
The DTech DT590006 Valve Cover Gasket is a direct replacement for the OE gasket in your 2003-2005 Dodge 5.9L Cummins. Built to meet or exceed OE standards, this kit includes one valve cover gasket, six retaining screw o-rings and the oil filler cap seal ring. Features: OE Style Replacement Meets Or Exceeds Factory Specs Service Tip: Replacement of a molded rubber valve cover gasket is recommended whenever there is visible physical damage or the sealing bead height has decreased by 5% or more. Installing new valve cover gaskets and related seal rings help insure a leak free valve cover installation. DTech Warranty: Consumer/Non-Professional Installers - 1 Year, Unlimited Mileage Warranty. Professional Shop / Automotive Truck Installers - 2 Years, Unlimited Mileage Warranty. This warranty applies to product used under normal operating conditions and service. Repairs, modification, disassembly or any other alteration of DTech products from their original condition are not covered by this warranty. Warranty will not be extended to failures caused by incorrect installation or application, modification, contamination, negligence or abuse. The warranty does not extend to diagnostic time, incidental or consequential damages.
DTech DT590007 Valve Cover Gasket Kit 10617 5.00 DTech DT590007 Valve Cover Gasket Kit
$ 180.12
The DTech DT590007 Valve Cover Gasket Kit is a direct replacement for your 2006-2013 Dodge 5.9L/6.7L Cummins. This kit includes the valve cover gasket with integral injector connectors plus six glow plug connectors. Features: Direct fit Replaces OE Part#: 5179091AC DTech Warranty: Consumer/Non-Professional Installers - 1 Year, Unlimited Mileage Warranty. Professional Shop / Automotive Truck Installers - 2 Years, Unlimited Mileage Warranty. This warranty applies to product used under normal operating conditions and service. Repairs, modification, disassembly or any other alteration of DTech products from their original condition are not covered by this warranty. Warranty will not be extended to failures caused by incorrect installation or application, modification, contamination, negligence or abuse. The warranty does not extend to diagnostic time, incidental or consequential damages.
DTech DT590009 Common Rail Injector Installation Kit 16768 1.00 DTech DT590009 Common Rail Injector Installation Kit
5 5 1
$ 3.31
The DTech DT590009 Common Rail Injector Installation Kit includes the seals needed to replace an injector on your 2003-2012 Dodge 5.9L/6.7L Cummins. Each kit includes Includes (1) injector external o-ring, (1) nozzle washer and (1) inlet stud o-ring. 1 kit required per injector. Features: Seals For (1) Injector Meets Or Exceeds Factory Specs DTech Warranty: Consumer/Non-Professional Installers - 1 Year, Unlimited Mileage Warranty. Professional Shop / Automotive Truck Installers - 2 Years, Unlimited Mileage Warranty. This warranty applies to product used under normal operating conditions and service. Repairs, modification, disassembly or any other alteration of DTech products from their original condition are not covered by this warranty. Warranty will not be extended to failures caused by incorrect installation or application, modification, contamination, negligence or abuse. The warranty does not extend to diagnostic time, incidental or consequential damages.
Hamilton Cams 07-G-5.9F Fire Ring Head Gasket (Standard) 60297 1.00 Hamilton Cams 07-G-5.9F Fire Ring Head Gasket (Standard)
$ 199
Eliminate the typical head gasket problems associated with higher boost levels in your 2003-2007 Dodge 5.9L 24V Cummins with Hamilton Cams 07-G-5.9F Fire Ring Head Gaskets! Fire rings provide a much stronger seal when your Cummins is making big power.Features:Standard Thickness4.560” Wire O.D.Ideal for High Performance/Competition BuildsAdditional Notes: Machining for grooves is requiredMust use head studs and verify head is flat
MAHLE 48383 Engine Timing Cover Seal 26296 1.00 MAHLE 48383 Engine Timing Cover Seal
$ 21.81
The MAHLE 48383 Engine Timing Cover Seal for your 1989-2017 Dodge 5.9L/6.7L Cummins is designed to meet or exceed OE specifications. Contains Repair Sleeve, Contains Sleeve And Dust Shield, Seal Material: Teflon Features: Meets Or Exceeds OE Specs Replaces Chrysler Part #'s: 4429 353, 5012 290AA Replaces Cummins Part #'s: 3802820, 3937111
MAHLE 67857 Rear Main Engine Crankshaft Seal 34199 1.00 MAHLE 67857 Rear Main Engine Crankshaft Seal
$ 50.69
Use the MAHLE 67857 Rear Main Engine Crankshaft Seal to replace the old leaking rear main seal in your 1989-2007 Dodge 5.9L Cummins. MAHLE Gaskets and seals are manufactured from only the highest quality materials giving you a factory-like fit, and long service life. Features:Contains Repair SleeveRear Engine Crankshaft Seal Cross Reference #: 3926126, 3927683, 3928530
MAHLE CS54556 Lower Engine Gasket Set 26304 2.00 MAHLE CS54556 Lower Engine Gasket Set
$ 106.89
The MAHLE CS54556 Lower Engine Gasket Set for your 2003-2007 Dodge 5.9L Cummins is built with OE style gaskets that are a direct replacement for the seals currently on your engine. This Lower Engine Gasket Set is designed to be used with the MAHLE Head Set to make a full gasket kit. Features: Meets Or Exceeds OE Specs Replaces Chrysler Part #: 5093 229AA Replaces Cummins Part #: 4089173 CS54556 Specifications Water Pump Gasket Included Yes Package Quantity 28 Item Grade OEM Standard Water Outlet Gasket Included Yes Oil Pan Gasket Material Paper Timing Cover Gaskets/Seal Included Yes Rear Main Seal Material Fluroelastomer Rear Main Seal Included Yes Oil Pan Gasket Included Yes Head Fasteners Included No Fuel Pump Gasket Included No Cylinder Head Gasket Included No
MAHLE Cylinder Head Gasket 54556 13472 2.00 MAHLE Cylinder Head Gasket 54556
$ 158.06
2003-2007 Dodge Truck VIN 6,C Dodge Truck. Cummins B Series. Service Specific Over-Bore Head Gasket, 1.10MM. Specifications Material: Multi-Layered Steel Torque to Yield: Yes Competitor Interchanges Qty Qty Comp Part No. Comp Name 1 1 3966343 CUMMINS ENGINE CO. 1 1 2830704 CUMMINS ENGINE CO. 0 0 26216PT FEL-PRO INC.
MAHLE Cylinder Head Gasket 54556A 13473 2.00 MAHLE Cylinder Head Gasket 54556A
$ 147.21
Reseal the cylinder head in your 2003-2007 Dodge 5.9L Cummins with the MAHLE Cylinder Head Gasket 54556A. MAHLE Head Gaskets are manufactured from only the best materials to give you a perfect fit and a factory-like seal. Features:107.4mm Bore1.20mm ThicknessOEM Standard Grade Mult-Layered Steel Construction Piston Protrusion More Than .30mm Cross Reference #: Cummins 3966342, 2830705 Fel-Pro 26218PT
MAHLE Cylinder Head Gasket 54557A 13509 5.00 MAHLE Cylinder Head Gasket 54557A
$ 97.94
Standard 1.28MM thickness head gasket for Dodge Cummins 5.9L 03-07 Specifications Material: Multi-Layered Steel Torque to Yield: Yes OEM Interchanges Qty OEM Qty OEM Part No. OEM Name 0 0 5086 859AB CHRYSLER Competitor Interchanges Qty Qty Comp Part No. Comp Name 1 1 3958645 CUMMINS ENGINE CO. 1 1 3954876 CUMMINS ENGINE CO. 1 1 26218PT FEL-PRO INC.