Keep your truck running in the coldest conditions with the AFE 42-90001 DFS780 Fuel System Cold Weather Kit on your DFS780 Fuel System. AFE's Cold Weather Kit easily plumbs into your engine's cooling system to warm your fuel to avoid gelling in freezing temperatures. Fits all DFS780 and DFS780 Pro Fuel Systems. Includes AFE Pro Guard D2 Fuel Filter.
Warms Fuel To Help Eliminate Gelling
Fits All AFE DFS780 and DFS780 Pro Fuel Systems
Install Note: Heater Hose that connects the coolant spacer to the cooling system is not included and must be sourced by the end user. AirDog 901-04-0003-3 Low Pressure Indicator Light23031.00
The PureFlow AirDog 901-04-0003-3 Low Pressure Indicator Light is a convenient add-on designed to work with your AirDog Fuel System. Featuring an 1/8" NPT sender, this light kit installs with your AirDog and is triggered when fuel pressure is below 5 PSI.
Activated Below 5psi
Base Thread Size: 1/8" NPT
Works With AirDog Fuel Systems
Attitude Performance 1003 Fuel Rail Plug348601.00
Replace the stock fuel pressure relief valve on your 2003-2007 Dodge 5.9L Cummins with The Attitude Performance 1003 Fuel Rail Plug. Made from solid 304 stainless steel, the 1003 Fuel Rail Plug prevents low fuel rail pressure and the diagnostic codes associated with it. The 1003 Fuel Rail Plug lets you push your truck to the limits without fuel pressure issues even in the most demanding conditions. Built in the USA on a state-of-the-art 7 axis CNC machine to ensure quality and a perfect fit. Features:304 Stainless Steel Construction Prevents Low Fuel Rail Pressure Eliminates P0148, P0192, P0087 DTC Codes Replaces OE Part# 3947799, 1-110-010-029MADE IN THE USA! BD-Power 1050070 Fuel Plug233381.00
The BD-Power 1050070 Fuel Plug for your 03-07 Dodge 5.9L Cummins is designed to block block-off your factory pressure relief valve found on your 5.9L Cummins. The BD-Power Fuel Plug will allow you to maintain consistent rail pressure and is especially beneficial to higher horsepower trucks.Features: Improves Engine StartingEasily Replaces Stock Valve.Seals In 30,000 PSI Rail Pressure BD-Power 1050347 Flow-Max Fuel Heater Kit291731.00
The BD-Power 1050347 Fuel Heater is a must have for those in cold climates. Prevent cold weather gelling of your AirDog fuel system with the BD-Power PTC Heating Element. Designed for quick installation, this heating element gets sandwiched between the water separator and filter head. The self regulating 320 watt heater has over 3x the amount of heating power of other single systems. Each kit includes heating element and wiring harness with sealed electrical connectors for an easy install.
Designed For AirDog Fuel Systems
Installs Between Filter and Filter Head
Self-Regulating 320 Watt Heater
Note: This product will fit all AirDog, AirDog 2, and AirDog II-4G Fuel Systems. BD-Power 1081130 Red LED Low Fuel Pressure Alarm Light6231.00
Protect the fuel system on your 1998.5-2007 Dodge 5.9L Cummins. A failing lift pump will not only cause sub-standard performance, it can cause costly damage to the injection pump. Keep tabs on your trucks fuel system with the BD low fuel pressure LED kit, which incorporates a red LED that illuminates if lift pump pressure falls below 5 PSI. Inexpensive protection and easy installation!
Illuminates Below 5 PSI
Helps Avoid Fuel System Damage
Additional InformationInstall SheetBD-Power 1081133 Amber LED Low Fuel Pressure Alarm Light311801.00
Protect the fuel system on your 1998.5-2007 Dodge 5.9L Cummins with the BD-Power 1081133 Amber LED Low Fuel Pressure Alarm Light. A failing lift pump will not only cause sub-standard performance, it can cause costly damage to the injection pump. Keep tabs on your trucks fuel system with the BD low fuel pressure LED kit, which incorporates a red LED that illuminates if lift pump pressure falls below 5 PSI. Inexpensive protection and easy installation!
Illuminates Below 5 PSI
Helps Avoid Fuel System Damage
Additional InformationInstall SheetBostech Fuel Pressure Actuator DEC031666131565.00
The Bostech Fuel Pressure Actuator DEC031666 is a direct replacement for your 2003-2007 Dodge 5.9L Cummins. This Bostech Fuel Pressure Actuator is built to meet or exceed OE specifications.
Meets Or Exceeds OE Specifications
Replaces OE Part#: 5183245AA
13 Month Unlimited Mileage Warranty
Cummins 3949988 Fuel Rail Pressure Sensor1011350.07
Cummins OE parts ensure that you're getting the right fit and performance when you purchase the Cummins 3949988 Fuel Rail Pressure Sensor for your 2003-2007 Dodge 5.9L Cummins. Cummins has been one of the most proven and trusted names in the diesel industry for over one hundred years! Using Cummins OE parts on your engine ensures that factory performance, fitment standards, and function is maintained.Features:Direct-Fit ReplacementConstructed From High Quality MaterialsMaintains Factory Fit & PerformanceCummins 4929618 Fuel Rail1011705.00
Cummins OE parts ensure that you're getting the right fit and performance when you purchase the Cummins 4929618 Fuel Rail for your 2003-2007 Dodge 5.9L Cummins. Found in vehicles and applications all over the world, Cummins is a legendary name in diesel. Built from only the best quality materials, Cummins OE parts are a top choice for any diesel owner repairing their engine.Features:Direct-Fit ReplacementConstructed From High Quality MaterialsMaintains Factory Fit & PerformanceDiesel RX DRX17SAR Universal Fuel Pressure Regulator349582.00
The Diesel RX DRX17SAR Universal Fuel Pressure Regulator allows you to control the pressure with an aftermarket lift pump that does not have an integrated regulator. This can be setup as a regulated return, or used on a pressure side of the pump with a return back to the tank. This regulator uses -8 o-ring boss ports which can be adapted to a -10AN. Includes universal mounting bracket.Features: Universal - For Many ApplicationsBuilt From Corrosion Resistant Materials5 Port Design: 4 Pressure Ports and 1 Return Port -8 O-Ring Boss (ORB) Thread Pitch: 3/4-16 Dual Spring Design Allows For Adjustability Dorman 904-309 High Pressure Fuel Rail Sensor292581.00
The Dorman 904-309 High Pressure Fuel Rail Sensor is a direct replacement for your 2003-2007 Dodge 5.9L Cummins. Dormans Fuel Pressure Sensor measures fuel pressure in the fuel rail, an important parameter for proper engine and fuel system operation.
Restores Fuel System Function
High Pressure Fuel System "Rail" Pressure Sensor
Replaces Chrysler OE Part#: 5093112AA
FASS 32283 Replacement Heater Element356782.00
The FASS 32283 Replacement Heater Element is a direct plug and play replacement heater element for the FASS HK-1001 Electric Heater Kit. Features:For FASS Fuel Systems Replacement Heater Element Application Notes: Heater only, no other parts included. In most cases, this is replacement heater purchased by those looking to add a second probe for a dual heater setup. If using as a dual heater, the HKS-1001 Dual Electric Heater Splitter will make installation much easier (see related items below). FASS FPR-1001 Fuel Pressure Regulator110105.00
The FASS FPR-1001 Fuel Pressure Regulator is intended for aftermarket performance applications requiring higher fuel pressures than a typical daily driver. These applications can vary from drag race vehicles, competition pulling trucks or high performance marine applications. For your convenience we have pre-drilled and tapped a fuel pressure gauge port that will make adjusting your regulator simple, eliminating any guess work. As an added performance benefit, we have also engineered a boost compensation port. This will allow you to run a line from your manifold to increase fuel pressure, very beneficial when under active acceleration and fuel demand has been increased.
Adjustable Fuel Pressure
For Gas and Diesel Applications
Built-In Fuel Pressure Port
Boost Compensation Port
Designed For 1/2" Lines
FASS HK-1001 Electric Heater Kit109942.00
The FASS Electric Heater Kit HK-1001 is an optional heater is intended as an upgrade for FASS systems being used in cold regions. Each FASS Titanium Series pump has ports for two electric heaters, that will aid in cold weather starts and keep fuel from gelling up while driving during sub freezing temperatures. The heater will begin warming the fuel block once the key is in the on position and will automatically shut off after the proper temperature has been reached.
Prevents Fuel Gelling
Warms Fuel Block During Cold Starts
Automatic On/Off Heater
Fits Titanium Series System
Complete Installation Kit Application Note: For FASS owners adding (2) Electric Heaters to their pumps a second probe is required (see related products below)If adding (2) heaters the FASS HKS-1001 Splitter Harness will make the installation easier (see related products below).FASS HK-1002 High Output Heater Disk503842.00
The FASS HK-1002 High Output Heater Disk can be added to any FASS Titanium or Titanium Signature Series Fuel System to prevent fuel gelling in cold temperatures. When fuel temperatures drop to below 34° Fahrenheit, a thermostatically controlled switch will automatically power on the 300 Watt Fuel Heater Disk to warm fuel as the fuel enters the FASS System, preventing the fuel from gelling in the FASS Filters. The fuel in the tank is also heated as the FASS continually polishes and returns fuel back to the tank. Once at optimal temperature, the thermostatic switch will automatically power off the High Output Heater Disk, eliminating any possibility of overheating the diesel fuel.Features:Prevents Fuel GellingAutomatic On/Off OperationWarms Fuel in the Fuel TankFor FASS Titanium and Titanium Signature SeriesFASS HKS-1001 Dual Electric Heater Kit Splitter349442.00
The FASS HKS-1001 Dual Electric Heater Kit Splitter eliminates the need to re-wire or solder the connections when installing dual electric heaters on your FASS Fuel System. Features:Plug and Play InstallationFor FASS Fuel Systems Eliminates Re-Wiring On Dual Heater KitsApplication Notes:Harness only, secondary heater required (see related items below). FASS NDB-1001 No-Drill Pump Mounting Bracket356824.00
The FASS NDB-1001 No-Drill Pump Mounting Bracket allows mounting of a FASS Titanium Lift Pump to your 1994-2012 Dodge 5.9L/6.7L Cummins or 2001-2012 GM 6.6L Duramax truck. This kit includes everything necessary for a complete bolt-on installation that requires no drilling or cutting of your vehicle. Features:Complete KitBolt-On InstallationMade In The USANote: This bracket is already included with vehicle specific FASS Titanium Fuel Systems. Fleece FPE-34783 Auxiliary Fuel Filter Kit505368.00
The Fleece FPE-34783 Auxiliary Fuel Filter Kit allows you to add a filtration system between the lift pump and high pressure pump on your 2003-2018 Dodge Ram 5.9L/6.7L Cummins. Included in this kit is a Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207), Filter base with integral mounting, Distribution filter block / filter coupler, Push Lock hose with all necessary AN and barb fittings, and CP3 Feed fittings for 5.9L and 6.7L. Features:Complete Auxiliary Fuel Filter KitDonaldson 3 Micron Fuel FilterFilter Base with Integral MountingAll Necessary Fittings, Hose, and HardwareNote: Your truck must be equipped with a fuel filter delete to use this kit (see below for fuel filter delete kits). Fleece FPE-CUMM-FBOP Mechanical Fuel Pump Block-Off Plate805631.00
Plug the ugly gaping hole in the side of your Cummins block and add some eye candy under the hood with the Fleece FPE-CUMM-FBOP Mechanical Fuel Pump Block-Off Plate. This block-off plate features a black powder coat finish with the Fleece logo and includes the bolts and O-ring needed for installation Features:Easy InstallationBlack Power Coat FinishIncludes Plate, O-ring and Bolts
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:
Effective 3/16 we have shifted Customer Service hours to 8:30 – 7:00pm EST. To ensure compliance with New Jersey’s recent curfew.
Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.