Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Attitude Performance 1009 Bolt-On Side Freeze Plug 29551 1.00 Attitude Performance 1009 Bolt-On Side Freeze Plug
$ 45.99
The Attitude Performance Products 1009 Bolt-On Side Freeze Plug eliminates blown freeze plugs due to high rpm on your 1989-2018 Dodge 5.9L/6.7L Cummins. Also a great way to dress up your engine. Made in the USA of military grade 6061 aluminum. Features: Bolt-On Design O-Ring For A Leak Free Seal Eliminates Blown Freeze Plugs Military Grade 6061 Aluminum Construction Note: Your truck will need anywhere from 1 to 4 depending on the block. Please note that while the engine is the same for several years at a time, there are many different castings. The guide below is used for reference only. Please check to confirm how many you will need. Application Guide: 1984-1998 4BT - 1 or 2 (depending on block). 1989-1998 6BT - 3 or 4 (depending on block). 1998.5-2002 24 Valve - 3 2003-Current - 3
Attitude Performance 1010-2 Bolt-On Rear Freeze Plug 29553 2.00 Attitude Performance 1010-2 Bolt-On Rear Freeze Plug
$ 53.99
The Attitude Performance Products 1010-2 Bolt-On Rear Freeze Plug for your 2003-2018 Dodge 5.9L/6.7L Cummins eliminates blown freeze plugs due to high RPM. If the factory freeze plug has failed, the Attitude Performance Products Freeze Plug can be installed without the need to remove the transmission. Made in the USA of military grade 6061 aluminum. Pre-drilled and tapped to 3/4" NPT for use with coolant bypass kits. Features: Bolt-On Design O-Ring For A Leak Free Seal Eliminates Blown Freeze Plugs Military Grade 6061 Aluminum Construction
Attitude Performance 1016-6 Saddle Jet Plugs 29555 1.00 Attitude Performance 1016-6 Saddle Jet Plugs
5 5 1
$ 44.99
The Attitude Performance 1016-6 Saddle Jet Plugs replace the original factory plastic plugs in your 2003-2016 Dodge 5.9L/6.7L Cummins. The APP Saddle Jet Plugs are a must for performance engines. The original factory plugs are made from plastic and can fail at any time due to higher engine heat. APPs plugs are made in the USA from 7075 aluminum. The saddle of the 6 main bearings was drilled for an oiler, but those engines didn't use oilers there, so the factory plugged the holes with plastic! With the heat generated from performance engines, the plastic plugs can deform or melt leaving an open hole from the main bearing which releases oil pressure.the bearings can fail and leave you on the side of the road. You dont want engine oil pressure issues! Correct the weakness of the plastic plugs now when youre working on your engine, Engine must be disassembled to install. Features: Pack Of 6 7075 Aluminum Construction For Long Life Important For All Modified and Performance Engines Replaces Cummins Part#: 3959574
Banks Power 42712 Grid Heater Delete 33150 4.00 Banks Power 42712 Grid Heater Delete
$ 189
The Banks Power 42712 Grid Heater Delete removes the factory heater grid in your 2007.5-2012 Dodge 6.7L Cummins for increased throttle response, and quicker spool up. Featuring a billet construction, the Banks Heater Grid Delete allows for greater air flow in your engine while also lowering exhaust gas temperatures (EGT) and improving air density. Engineered for a precision fit, this heater delete is easily re-installed and for quick starting when the cold weather sets in. Features: Removes Heater Grid Increased Throttle Response Precision Fit Billet Construction Lowers Exhaust Gas Temperatures Note: Aftermarket tuning and other supporting modifications are required for installation.
Banks Power 42714 Grid Heater Delete 33149 4.00 Banks Power 42714 Grid Heater Delete
$ 209
The Banks Power 42714 Grid Heater Delete removes the factory heater grid in your 2013-2018 Dodge 6.7L Cummins for increased throttle response, and quicker spool up. Featuring a billet construction, the Banks Heater Grid Delete allows for greater air flow in your engine while also lowering exhaust gas temperatures (EGT) and improving air density. Engineered for a precision fit, this heater delete is easily re-installed and for quick starting when the cold weather sets in. Features: Removes Heater Grid Increased Throttle Response Precision Fit Billet Construction Lowers Exhaust Gas Temperatures Note: Aftermarket tuning and other supporting modifications are required for installation.
BD-Power 1036724 Positive Air Shutdown 24631 8.00 BD-Power 1036724 Positive Air Shutdown
$ 635
The BD-Power 1036724 Positive Air Shutdown for your 2013-2014 Dodge Ram 6.7L Cummins is the perfect solution for when you need an emergency engine shutdown system. Some industries such as mining, oil refinery, forestry, mobile welding, septic removal and refueling require some vehicles to have an emergency engine shutdown in place. The most effective method for this is to cut the air supply to the Diesel engine ensuring fuel ignition to cease. With BDs Positive Air Shutdown (PAS), an inline butterfly valve is placed in the air intake line and when activated by its heavy duty electrical solenoid, the engine will shutdown within seconds. Standard applications include automatic over-speed electronics and CAC pipes included for some vehicles. The PAS butterfly valve design reduces the number of parts and the overall size as compared to competitive units. Aluminum and stainless components plus weatherproof electrical connectors are used to prevent corrosion. Easy installation with no welding needed for hose retaining beads by utilizing innovative bead boot locks. Features: Excellent for racing sanctioning bodies that require emergency shutdowns Also great for mining, forestry and oil industries where emergency shut downs are required. Prevents "run-away" scenarios by cutting air supply to engine.
BD-Power 1036750 E-PAS Emergency Engine Shutdown 25705 2.00 BD-Power 1036750 E-PAS Emergency Engine Shutdown
$ 736.25
The BD-Power 1036750 E-PAS Emergency Engine Shutdown for your 2007.5-2009 Dodge 6.7L Cummins is the perfect solution for when you need an emergency engine shutdown system. Some industries such as mining, oil refinery, forestry, mobile welding, septic removal and refueling require some vehicles to have an emergency engine shutdown in place. The most effective method for this is to cut the air supply to the Diesel engine ensuring fuel ignition to cease. BD-Power achieves this with the E-PAS without having to add additional bulky components or modifications to your engine or intake system. The E-PAS is an electronic controller that simply re-purposes the factory butterfly valve in your EGR System. It installs easily with factory style plug-in connectors and will not interfere with normal operation, or throw any codes or check engine lights. Most importantly, it can be easily uninstalled for those that lease their truck. Features: Easy Installation Uses Factory EGR Butterfly Automatically Resets After Shutdown Prevents "Runaway" Scenarios By Cutting Air Supply To Engine Note:This product requires your factory EGR and emissions equipment to function properly. This product is not intended to be used on trucks which have been modified for off-road tuning. Applications: 2007.5-2009 Dodge Ram 2500/3500 Pickup 2007.5-2010 Dodge Ram 3500/4500 Cab and Chassis
BD-Power 1036751 E-PAS Emergency Engine Shutdown 25706 1.00 BD-Power 1036751 E-PAS Emergency Engine Shutdown
$ 736.25
The BD-Power 1036751 E-PAS Emergency Engine Shutdown for your 2010-2018 Dodge 6.7L Cummins is the perfect solution for when you need an emergency engine shutdown system. Some industries such as mining, oil refinery, forestry, mobile welding, septic removal and refueling require some vehicles to have an emergency engine shutdown in place. The most effective method for this is to cut the air supply to the Diesel engine ensuring fuel ignition to cease. BD-Power achieves this with the E-PAS without having to add additional bulky components or modifications to your engine or intake system. The E-PAS is an electronic controller that simply re-purposes the factory butterfly valve in your EGR System. It installs easily with factory style plug-in connectors and will not interfere with normal operation, or throw any codes or check engine lights. Most importantly, it can be easily uninstalled for those that lease their truck. Features: Easy Installation Uses Factory EGR Butterfly Automatically Resets After Shutdown Prevents "Runaway" Scenarios By Cutting Air Supply To Engine Note: This product requires your factory EGR and emissions equipment to function properly. This product is not intended to be used on trucks which have been modified for off-road tuning. Applications: 2010-2018 Dodge Ram 2500/3500 Pickup 2011-2018 Dodge Ram 3500/4500 Cab and Chassis
BD-Power 1040023 Cummins Killer Frost Plug Plate 34537 1.00 BD-Power 1040023 Cummins Killer Frost Plug Plate
$ 45.6
Eliminate leaks before they happen on your 2003-2018 Dodge 5.9L/6.7L Cummins with the BD-Power 1040023 Cummins Killer Frost Plug Plate. From the factory, the rear frost plug is known to leak, or blow out causing a massive loss in coolant. The BD-Power Killer Frost Plug Plate installs easily and does not require removal of the off the old frost plug. In fact, it works with the frost plug in place, blown out, or leaking due to the robust o-ring seal. Features:Bolt-On InstallationFor Rear Coolant Frost PlugRemoval Of Old Frost Plug Not Required5 Flange Head Bolts Keep Coolant Contained
Beans Diesel 210311 Bean Machine Billet Aluminum Gridlock Girdle Kit 50187 20.00 Beans Diesel 210311 Bean Machine Billet Aluminum Gridlock Girdle Kit
$ 711.55
The Beans Diesel 210311 Bean Machine Billet Aluminum Gridlock Girdle Kit is a lightweight yet strong girdle that doesn't interfere with the oil pan on your 2003-2018 Dodge 5.9L/6.7L Cummins. Beans created their own girdle due to other manufacturers who's products had issues like low quality hardware, studs that hit the oil pan, or other fitment concerns that caused leaks. The 210311 not only takes care of all of those issues mentioned but also increases the strength of the main caps by using dowel pins to lock them in place while using every available bolt all the way to the edge of the block to tie the entire bottom end together. To further enhance main cap strength, preload set screws are added over the center of each main cap. This prevents main cap walk, bending, and bowing under the extreme loads created by high performance engines.Beans decided to uses billet aluminum in the construction of their girdle to save weight while the thickness adds more than enough tensile strength to get the job done. Leading competitors are using a mere .300" thick girdle, this is less than half of what Beans is made of, giving the gridlock girdle more than twice the strength! Pressed-in steel inserts at the main studs prevent the studs from compressing into the softer aluminum while the locating dowel locks the mains in place. For a perfect fit, a high quality O-ring is used to seal against the block surface.Included in the Kit:-1 Billet Aluminum Gridlock Girdle with Steel Dowel Pins (1)-½” x 13 Set Screws (7)-½” x 13 Flange Nuts (7)-Oil Pickup Tube Spacers (2)-Oil Pan Bolts (32)-Oil Pickup Tube Bolts (2)-10mm Block Stiffener Bolts (12)-10mm Extra Long Block Stiffener Bolts For Oil Pickup Brackets (2)Features:Prevents Main Caps From Bowing and BendingDesigned to Work With ARP Main StudsIncreases Strength of Main CapsBillet Aluminum ConstructionNo Modifications NeededMade In The USAO-ring SealNote: Main Studs are not included with this kit (see related products below).
Beans Diesel 210330 Bean Machine Grid Heater Delete 50234 6.00 Beans Diesel 210330 Bean Machine Grid Heater Delete
$ 118.75
Increase airflow to the engine in your 2007.5-2018 Dodge Ram 6.7L Cummins with the Beans Diesel 210330 Bean Machine Grid Heater Delete. Constructed from billet aluminum, the Beans grid heater delete features an internally elevated plenum cover that is designed to flow as much air as possible to back three cylinders while still utilizing all the factory hardware.Features:Billet Aluminum ConstructionRemoves Restrictive Grid HeaterIncreases Airflow To Rear CylindersNote: Off-road tuning required for installation.
Bostech BTS031323 Exhaust Back Pressure (EBP) Sensor 28451 1.00 Bostech BTS031323 Exhaust Back Pressure (EBP) Sensor
$ 79.95
The Bostech BTS031323 Exhaust Back Pressure (EBP) Sensor is a stock replacement for the original sensor equipped on your truck. This part is a stock replacement built to meet or exceed the factory specifications. Features: OE Replacement Replaces OE# 4928594, 408798NX, 4087989 Bostech Old Part#: ISK223
Bostech BTS031716 NOx Downstream Sensor 50003 2.00 Bostech BTS031716 NOx Downstream Sensor
$ 379.95
The Bostech BTS031716 NOx Downstream Sensor is a high-quality alternative to the expensive OEM NOx sensor for your 2011-2012 Dodge Ram 3500/4500/5500 6.7L Cummins. Bostech is a leader in manufacturing and supplying reliable, high quality auto parts. This sensor comes backed by a 13 month unlimited mileage warranty.Features:Ready To InstallDirect ReplacementDownstream Sensor13 Month Unlimited Mileage WarrantyReplaces OE Part#: 05149216AA, 05149216ABApplications:2011-2012 Dodge Ram 3500 6.7L Cummins2011-2012 Dodge Ram 4500 6.7L Cummins2011-2012 Dodge Ram 5500 6.7L Cummins
Bostech BTS031721 NOx Upstream Sensor 50004 2.00 Bostech BTS031721 NOx Upstream Sensor
$ 379.95
Replace the failing upstream NOx sensor in your 2011-2012 Dodge Ram 3500/4500/5500 6.7L Cummins with a durable Bostech BTS031721 NOx Upstream Sensor. Bostech is a leader in manufacturing and supplying reliable, high quality auto parts. This sensor comes backed by a 13 month unlimited mileage warranty.Features:Ready To InstallUpstream SensorDirect Replacement13 Month Unlimited Mileage WarrantyReplaces OE Part#: 68085740AAApplications:2011-2012 Dodge Ram 3500 6.7L Cummins2011-2012 Dodge Ram 4500 6.7L Cummins2011-2012 Dodge Ram 5500 6.7L Cummins
Bostech BTS031740 NOx Lower Sensor 50005 2.00 Bostech BTS031740 NOx Lower Sensor
$ 358.75
When it comes time to replace the failing lower NOx sensor in your 2013-2015 Dodge Ram 6.7L Cummins, look no further than the Bostech BTS031740 NOx Lower Sensor. Ready to install, this sensor is a direct replacement for your stock unit and comes backed by a 3 year unlimited mileage warranty. Features:Lower SensorReady To InstallDirect Replacement13 Month Unlimited Mileage WarrantyReplaces OE Part#: 68085740AAApplications:2013-2014 Dodge Ram 2500 6.7L Cummins2013-2015 Dodge Ram 3500 6.7L Cummins2013-2015 Dodge Ram 4500 6.7L Cummins2013-2015 Dodge Ram 5500 6.7L Cummins
Bostech BTS031768 NOx Outlet Sensor 50006 2.00 Bostech BTS031768 NOx Outlet Sensor
$ 324.95
Don't settle for just any off-the-shelf brand when replacing the outlet NOx sensor in your 2014-2017 Dodge Ram 6.7L Cummins, install the durable Bostech BTS031768 NOx Outlet Sensor. Ready to install, this sensor is a direct replacement for your stock unit and comes backed by a 3 year unlimited mileage warranty. Features:Outlet Sensor834mm LengthReady To InstallDirect Replacement13 Month Unlimited Mileage WarrantyReplaces OE Part#: 68227486AA, 68197109AAApplications:2014-2017 Dodge Ram 2500 6.7L Cummins2015-2017 Dodge Ram 3500 6.7L Cummins2015-2017 Dodge Ram 4500 6.7L Cummins2015-2017 Dodge Ram 5500 6.7L Cummins
Bostech WH03027 Valve Cover Pigtail 32570 1.00 Bostech WH03027 Valve Cover Pigtail
$ 34.95
Replace the faulty Valve Cover Pigtail in your 2007-2018 Dodge 5.9L/6.7L Cummins with the Bostech WH03027 Valve Cover Pigtail. Normal underhood temperatures can shorten the life of vital engine harness connections. Rather than replacing an expensive harness, Bostech offers the pigtails separately for an easy, affordable repair. Features: Valve Cover Pigtail Replaces Damaged OE Connector 13 Month Unlimited Mileage Warranty
Cummins 251919 Engine Block Heater Element Cord 101151 0.20 Cummins 251919 Engine Block Heater Element Cord
$ 19.93
Restore factory performance and function to the engine in your 1989-2020 Dodge 5.9L/6.7L Cummins with the Cummins 251919 Engine Block Heater Element Cord. Each Block Heater Cord is 6 feet long and fits with most Cummins heater elements used on the 12-valve and 24-valve engines. Using Cummins OE parts on your engine ensures that factory performance, fitment standards, and function is maintained. Cummins has been one of the most proven and trusted names in the diesel industry for over one hundred years!Features:Direct-Fit ReplacementConstructed From High Quality MaterialsMaintains Factory Fit & Performance
Cummins 3975628 Engine Block Heater Element 101167 0.31 Cummins 3975628 Engine Block Heater Element
$ 38.64
Restore factory performance and function to the engine in your 1998.5-2020 Dodge 5.9L/6.7L Cummins with the Cummins 3975628 Engine Block Heater Element. Trusted by diesel enthusiats everywhere, Cummins OE parts are always the first choice when repairing your engine. Using Cummins OE parts on your engine ensures that factory performance, fitment standards, and function is maintained. Please confirm application. Some later models also use the 3916127 block heater.Features:Direct-Fit ReplacementConstructed From High Quality MaterialsMaintains Factory Fit & Performance
Cummins 5291050 Engine Oil Pump 101171 2.20 Cummins 5291050 Engine Oil Pump
$ 128.47
The Cummins 5291050 Engine Oil Pump is a direct replacement for your 2003-2018 Dodge 5.9L/6.7L Cummins. Found in vehicles and applications all over the world, Cummins is a legendary name in diesel. Using Cummins OE parts on your engine ensures that factory performance, fitment standards, and function is maintained.Features:Direct-Fit ReplacementConstructed From High Quality MaterialsMaintains Factory Fit & Performance
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • Effective 3/16 we have shifted Customer Service hours to 8:30 – 7:00pm EST. To ensure compliance with New Jersey’s recent curfew.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.