Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 46-40054 BladeRunner Ductile Iron Exhaust Manifold 27618 24.00 AFE 46-40054 BladeRunner Ductile Iron Exhaust Manifold
$ 567.15
The AFE 46-40054 BladeRunner Ductile Iron Exhaust Manifold for your 2007.5-2018 Dodge 6.7L Cummins increases performance and throttle response in your truck by outflowing the factory exhaust manifold by up to 49%! Featuring cast-in EGR flanges, this exhaust manifold retains the factory EGR system making it a direct bolt-in replacement. This manifold also features a thick wall flange design to increase strength and eliminate warping and cracking, while the machined ports and merged runner design reduces backpressure and maximizes exhaust flow. One-Piece Construction: This manifold is constructed of durable cast ductile iron with a reinforcing rib for maximum strength between the wall flanges at the ports. Dual Auxiliary Ports: Two Exhaust Gas Temperature (EGT) probe ports are supplied for easy installation of gauges or testing equipment. Hassle-Free Installation: 6-port gaskets are included for a hassle-free installation. Features: Increased Flow Stock Turbo Flange One-Piece Construction Cast-In EGR Flanges Retain Factory EGR 6 Port Gaskets Included For Hassle Free Install Limited 2-Year Warranty Note: Replacement bolts not included. See items below.
ATS 2049202326 Pulse Flow Exhaust Manifold 31685 30.00 ATS 2049202326 Pulse Flow Exhaust Manifold
$ 470.25
The ATS 2049202326 Pulse Flow Exhaust Manifold increases reliability, performance and improves exhaust flow on your 2007.5-2018 Dodge 6.7L Cummins. Designed as a bolt-on upgrade, this exhaust manifold features a non-stock T3 flanged configuration for aftermarket turbochargers. The Pulse Flow Manifold has front and rear EGR ports so you can retain your factory EGR system. The Pulse Flow 2-Piece manifold also features a patented ball flange design that allows for expansion and contraction without cracking like the factory exhaust manifold. Includes engine to manifold gaskets. Features: T3 Flange Improved Exhaust Flow Retains Stock EGR System Pre-Drilled and Tapped Exhaust Back Pressure Port Note: Exhaust manifold bolts are not included.
ATS 2049272326 Pulse Flow Exhaust Manifold 27815 30.00 ATS 2049272326 Pulse Flow Exhaust Manifold
$ 470.25
The ATS 2049272326 Pulse Flow Exhaust Manifold for your 2007.5-2018 Dodge 6.7L Cummins increases reliability, performance and improves exhaust flow while eliminating the common cracking issues with your stock exhaust manifold. Designed as a drop-in upgrade, this exhaust manifold bolts in place of your factory manifold and has front and rear EGR ports to retain your factory EGR System. The Pulse Flow 2-Piece manifold also features a patented ball flange design that allows for expansion and contraction without cracking like the factory exhaust manifold. Features: Bolt-On Replacement Improved Exhaust Flow Retains Stock EGR System Pre-Tapped For Exhaust Backpressure Sensor Note: Exhaust manifold bolts are not included. This manifold is not for use on Cab and Chassis models. Engine to manifold gaskets included.
ATS 2049352218 Pulse Flow Center Wastegated Exhaust Manifold 32243 27.00 ATS 2049352218 Pulse Flow Center Wastegated Exhaust Manifold
$ 665
The ATS 2049352218 Pulse Flow Center Wastegated Exhaust Manifold for your 1998.5-2018 increases reliability and improves exhaust flow while eliminating the common cracking issues with your factory exhaust manifold. Designed as an upgrade, this 3-piece manifold features a T3 flange and has a center wastegate flange for those installing an external wastegate. Wastegate not included (see related items below). Features: T3 Flange Center Wastegate Flange High-Temp Black Coating Fits 45mm HyperGate Wastegate (Sold Separately) Note: This exhaust manifold is not intended for use with stock turbo setups. Replacement bolts not included. Engine to manifold gaskets included.
BD-Power 1045947-T4 Wastegated T4 40-Degree Exhaust Pulse Manifold 33867 24.00 BD-Power 1045947-T4 Wastegated T4 40-Degree Exhaust Pulse Manifold
$ 635
Use the BD-Power 1045947-T4 Wastegated T4 Exhaust Pulse Manifold at the start of your custom turbo system on your 1998.5-2018 Dodge 5.9L/6.7L Cummins. Featuring a heavy-duty multi-piece design to eliminate manifold cracks common with the factory manifold, the BD-Power Exhaust Pulse Manifold is cast from high silicon ductile iron with built-in expansion joints allowing your manifold to expand and contact without cracking. Machined for a 45mm Turbosmart HyperGate Wastegate, this exhaust manifold is perfect for those building a custom turbo setup. If an external wastegate is not being used, the included block-off plate can be installed instead. As the name would imply, these manifolds are "pulse tuned" to assist in combustion chamber evacuation and increased exhaust flow. The result is quicker turbo spool-up, reduced backpressure, increased power, and better fuel economy. Great for stock, and performance applications. Pre-drilled and tapped for pyrometer probe. Features: T4 Turbo Flange 40-Degree Center Mounted Flange Expansion Joint Eliminates Cracking Pulse-Tuned For Maximum Performance Cast From Durable, High-Silicon Ductile Iron Machined For 45mm TurboSmart HyperGate Wastegate Note: Gaskets, replacement bolts and wastegate not included. See related items below. For aftermarket T4 flanged turbochargers only.
BD-Power 1045965 Exhaust Manifold 27505 29.00 BD-Power 1045965 Exhaust Manifold
5 5 1
$ 510
The BD-Power 1045965 Exhaust Manifold is a must have on your 2007.5-2018 Dodge 6.7L Cummins. Cast from high-silicon ductile iron this heavy-duty, multi-piece exhaust manifold has built-in expansion joints that allow for growth when heated rather than cracking like the stock application. Additional material in the turbo mount area as well as webbing between ports is also added for increased strength. Exhaust manifold gaskets sold separately. Features: Fits OE Turbocharger Expansion Joints To Eliminate Cracking Withstands Extreme Temperatures and Vibration Offers Quicker Spool-Up and Reduced Backpressure Bolt-On Upgrade, Retains Factory Installed EGR System Application Notes: For pickup models only. Not for Cab and Chassis.Gaskets and replacement bolts not included.
BD-Power 1045965-T4 Exhaust Manifold 27553 29.00 BD-Power 1045965-T4 Exhaust Manifold
$ 565
The BD-Power 1045965-T4 Exhaust Manifold is a must have on your 2007.5-2018 Dodge 6.7L Cummins. Cast from high-silicon ductile iron this heavy-duty, multi-piece exhaust manifold has built-in expansion joints that allow for growth when heated rather than cracking like the stock application. Additional material in the turbo mount area as well as webbing between ports is also added for increased strength. Exhaust manifold gaskets sold separately. Features: 6.7L performance replacement manifold for use T4 mount turbochargers (S300,S400,etc.) Fully divided pulse manifold design, allows for quicker turbo response Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration and in high performance applications Larger porting design than others maximizes T4 turbochargers potential power Thick walled casting and integral slip joint prevents cracking and exhaust leaks Experience quick spool times and low drive pressures with an overall increase in performance Fully EGR compatible Gaskets set with EGR port, exhaust port and turbo mount gaskets available separately - P/N 1045992-T4 Pre-drilled for pyrometer probes Note: This T4-Flanged Exhaust Manifold requires the uses of an aftermarket T4 flanged turbocharger. It will not work with your stock turbocharger. Gaskets and replacement bolts not included.
BD-Power 1045986-T4 Exhaust Manifold Gasket Kit 23841 1.00 BD-Power 1045986-T4 Exhaust Manifold Gasket Kit
$ 71
The BD-Power 1045986-T4 Exhaust Manifold Gasket Kit provides you with the high quality gaskets needed to install a BD-Power T4 Exhaust Manifold on your 1998.5-2018 Dodge 5.9L and 6.7L Cummins. Features: For BD-Power T4 Manifold High Quality OE Style Gaskets Note: Not for use on stock turbo applications, only fits on T4 manifolds.
BD-Power 1045986-T6 Exhaust Manifold Gasket Kit 23839 1.00 BD-Power 1045986-T6 Exhaust Manifold Gasket Kit
$ 71
The BD-Power 1045986-T6 Exhaust Manifold Gasket Kit provides you with the high quality gaskets needed to install a BD-Power T6 Exhaust Manifold on your 1998.5-2018 Dodge 5.9L and 6.7L Cummins. Features: For BD-Power T6 Manifold High Quality OE Style Gaskets Note: Not for use on stock turbo applications, only fits on T6 manifolds.
BD-Power 1045992 Exhaust Manifold Gasket Set 15526 1.00 BD-Power 1045992 Exhaust Manifold Gasket Set
$ 77
The BD-Power 1045992 Exhaust Manifold Gasket Set for your 2007.5-2018 Dodge 6.7L Cummins is a direct-replacement gasket kit that works with the BD-Power Exhaust Manifolds or as a simple replacement for your OE gaskets. Features: Direct Replacement Fits Stock and BD Exhaust Manifold
BD-Power 1045992-T4 Exhaust Manifold Gasket Set 27554 1.00 BD-Power 1045992-T4 Exhaust Manifold Gasket Set
$ 77
The BD-Power 1045992-T4 Exhaust Manifold Gasket Set for your 2007.5-2018 Dodge 6.7L Cummins is a direct-replacement gasket kit that works with BD-Power T4 Exhaust Manifolds. Features: Exhaust Manifold Gasket Kit for 1045965-T4 6.7L T4 Mount Manifold Includes EGR port, exhaust port and turbo mount gaskets Note: This gasket kit is not intended for use on your factory installed turbocharger. This gasket kit can only be used on an aftermarket T4 Exhaust Manifold and Turbocharger.
BD-Power 1045995-T4 Ported T4 Exhaust Manifold 23842 24.00 BD-Power 1045995-T4 Ported T4 Exhaust Manifold
5 5 1
$ 565
The BD-Power 1045995-T4 Ported T4 Exhaust Manifold for your 1998.5-2018 Dodge 6.7L Cummins features a larger runner sizes for enhanced flow and a T4 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Features: T4 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T4 turbocharger. Replacement bolts and gaskets not included.
BD-Power 1045995-T6 Ported T6 Exhaust Manifold 23840 24.00 BD-Power 1045995-T6 Ported T6 Exhaust Manifold
$ 565
The BD-Power 1045995-T6 Ported T6 Exhaust Manifold for your 1998.5-2018 Dodge 5.9L/6.7L Cummins features a larger runner sizes for enhanced flow and a T6 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Features: T6 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T6 turbocharger. Replacement gaskets and manifold bolts are not included.
BD-Power 1045996-T4 Wastegated Ported Exhaust Manifold 26813 26.00 BD-Power 1045996-T4 Wastegated Ported Exhaust Manifold
$ 635
The BD-Power 1045996-T4 Wastegated Ported Exhaust Manifold for your 1998.5-2018 Dodge 5.9L/6.7L Cummins features a larger runner size for enhanced flow and a T4 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Wastegated manifold is machined for use with Turbo Smart 45mm Hyper Gate (not included). Wastegate block-off plate and clamp provided. Features: T4 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Wastegate Block-Off Plate and Clamp Included Machined For Use w/ Turbo Smart 45mm Hyper Gate (not included) Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T4 turbocharger. Replacement gaskets and manifold bolts not included.
BD-Power 1045996-T6 Wastegated Ported Exhaust Manifold 26814 27.00 BD-Power 1045996-T6 Wastegated Ported Exhaust Manifold
$ 635
The BD-Power 1045996-T6 Wastegated Ported Exhaust Manifold for your 1998.5-2018 Dodge 5.9L/6.7L Cummins features a larger runner size for enhanced flow and a T6 flange to mount your aftermarket turbocharger. For maximum and increased flow this manifold is casted with ports and runners that match the inlet gasket within 0.03". It's built-in heat expansion joints prevent cracking and the heavy cast HiSi Ductile Iron retains heat energy and is coated with high temperature black. The center mounted turbo flange is angled at an optimum 20° rather than 40º and helps with mounting S400,S500 and other larger turbochargers. Wastegated manifold is machined for use with Turbo Smart 45mm Hyper Gate (not included). Wastegate block-off plate and clamp provided. Features: T6 Flange 2 Pre-Drilled and Tapped 1/8" NPT Ports Ported Design Allows For Optimum Flow Heat Expansion Joints Prevent Cracking Wastegate Block-Off Plate and Clamp Included Machined For Use w/ Turbo Smart 45mm Hyper Gate (not included) Note: This exhaust manifold is not for use on stock turbo applications. It will require the use of a T6 turbocharger. Replacement gaskets and manifold bolts not included.
Dorman 03417B Exhaust Manifold Bolts 29267 1.00 Dorman 03417B Exhaust Manifold Bolts
$ 29.35
The Dorman 03417B Exhaust Manifold Bolts for your 2004.5-2018 Dodge 5.9L and 6.7L Cummins take the hassle out of re-installing your exhaust manifold. Save time and energy by having the right hardware on hand when you need it. Features: Direct Fit 10.9 Bolt Grade Manifold To Cylinder Head Bolts Replaces OE Part#: 05012557-AA, 5012557AA
Dorman 674-895 Exhaust Manifold 29265 9.00 Dorman 674-895 Exhaust Manifold
$ 374.95
The Dorman 674-895 Exhaust Manifold for your 2007.5-2019 Dodge 6.7L Cummins gives you an affordable solution to replacing the old cracked or damaged manifold on your 6.7L Cummins. More like a kit than a single part, Dorman exhaust manifolds include the gaskets for an easier installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Features: Direct Fit Stock Replacement Replaces Chrysler Part#: 68027070AA, 68210184AA, 68210184AB Note: Turbo flange gasket not included. For pickups only, will not work on Cab and Chassis.
Dorman 674-899 Exhaust Manifold 29372 27.00 Dorman 674-899 Exhaust Manifold
$ 280.95
The Dorman 674-899 Exhaust Manifold for your 2007.5-2012 Dodge 6.7L Cummins Ram 3500/4500/5500 gives you an affordable solution to replacing the old cracked or damaged manifold on your 6.7L Cummins. More like a kit than a single part, Dorman exhaust manifolds include the gaskets for an easier installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Features: Direct Fit Stock Replacement Replaces Chrysler OE Part#: 68002432AB Note: Fits Cab and Chassis 3500/4500/5500 models only.
Fleece FPE-34211 Dual Pump Spoke Pulley 34776 3.00 Fleece FPE-34211 Dual Pump Spoke Pulley
$ 219
The Fleece FPE-34211 Dual Pump Spoke Pulley is designed for use on your 2003-2016 Dodge 5.9L/6.7L Cummins with the Fleece Dual Pump Bracket. This Pulley is specially machined with a spoke design and is ready for use in your dual pump setup. Features:Dual CP3 PulleyFor Use With Fleece Dual Pump BracketColor Options:FPE-34211-BLK-SPK - BlackFPE-34211-BLU-SPK - Blue FPE-34211-ORG-SPK Orange FPE-34211-RED-SPK - Red
Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head) 44198 1.00 Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head)
$ 199
Upgrade the rusty or broken exhaust manifold studs on your 1994-2018 Dodge Cummins 5.9L/6.7L with a Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head). These exhaust manifold studs are constructed from aged 603 stainless steel and feature a 7 mm external hex head for easy installation. The Stainless Steel is not only rust and corrosion resistant so these studs always look good, but they are also stronger than the factory bolts and allow for a higher clamping force and easier installation.Features:7mm External Hex HeadAged 603 Stainless Steel12 Point Nuts and Washers IncludedHigher Clamping Force (Torque to 40ft/lbs using Anti-Seize)Application Note:Cummins 5.9L 12V (1994 - 1998) - Aftermarket exhaust manifold onlyCummins 5.9L 24V (1998.5 - 2002)Cummins 5.9L 24V (2003 - 2007) - Requires removal of factory heat shieldCummins 6.7L 24V (2007.5 - 2018)