The ARP Dodge Cummins Balancer Bolt Kits are optimized for enhanced reliability and increased strength. Each kit includes four (M12 x 1.25) 8740 Pro Series balancer bolts that are rated at 200,000 psi tensile strength, four 8740 parallel ground washers and a 1/2 oz. pack of ARP Ultra-Torque fastener assembly lubricant. ARP bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining and designed to exceed the OEM fasteners in strength and durability. Optimum design, enhanced reliability and increased strength are the main attributes of ARPs Pro Series balancer bolt kits.
200,000 PSI Tensile Strength
4 (M12 x 1.25) Bolts
ARP 247-5405 Main Stud Kit284585.00
The ARP 247-5405 Main Stud Kit for your 2007.5-2018 Dodge 6.7L Cummins is recommended over bolts whenever possible for several key reasons. First is the ability to obtain more accurate torque readings because studs don't "twist" into the block. All clamping forces are on one axis. By the same token, there is less force exerted on the block threads, which contributes to improved block life.
Finally, the there are factors of easier engine assembly and proper alignment of caps every time. All kits come complete with hardened parallel-ground washers and high quality nuts. The studs are manufactured from 8740 chrome-moly steel, heat-treated in-house to 200,000 PSI tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 2000% stronger than others.
Increased Durability In Extreme Applications
Note: For engines with factory girdle. ARP 247-7201 Rocker Pedestal Stud Kit315538.00
The ARP 247-7201 Rocker Pedestal Stud Kit provides reliability and increased strength in your 1998.5-2018 Dodge 5.9L/6.7L Cummins. These ARP High Performance Series Fasteners are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining and rated at 180,000 psi tensile strength. Optimum design, enhanced reliability and increased strength are the main attributes of ARPs High Performance Series fastener kits.
Increased Strength and Reliability
Fits 24-Valve Engines
ARP Diesel Custom Age 625+ Head Stud Kit 247-4204214510.00
ARP® ADDS 260,000 PSI HEAD STUDS
FOR DODGE/CUMMINS and DURAMAX DIESELS
With performance enthusiasts adding increasing amounts of turbo boost to
diesel applications, ARP® has provided an extra measure of security in
the form of extra-strong head studs manufactured from the firm's
proprietary Custom Age 625+® material that has a minimum rating of
260,000 psi tensile strength. They are engineered to provide the
clamping force required to keep cylinder heads from lifting due to
exceptionally high combustion pressures.
ARP® also offers head stud kits made from ARP2000 (220,000 psi minimum)
for the Dodge/Cummins plus Chevy Duramax diesel, Ford 7.3L Powerstroke
diesel, and 6.0L Powerstroke. The stud kits include heat-treated
chrome-moly steel nuts (12-point) and parallel ground washers.
The studs are manufactured in ARPs Santa Paula, CA plant, with threads
rolled after heattreat to provide optimum fatigue strength. They are
centerless ground to assure perfect concentricity. The ends of the studs
are broached to acilitate easy installation. This feature also enables
the cylinder head to be removed in tight quarters.ARP Diesel Head Stud Kit 247-420215549.00
To overcome head gasket failures that can occur in diesel engines employed in truck and RV applications, industry leader ARP has introduced extra heavy-duty head studs for the popular Ford, Dodge and GM powerplants. These ARP studs are rated at 220,000 psi tensile strength, and provide the clamping force required to keep cylinder heads from lifting due to higher combustion pressures.
The studs are manufactured in ARP's Santa Paula, CA plant from proprietary ARP 2000 material, with threads rolled after heat-treat to provide optimum fatigue strength. They are centerless ground to assure perfect concentricity. The ends of the studs are broached to facilitate easy installation. This feature also enables the cylinder head to be removed in tight quarters. Also included in each kit are heat-treated, chrome-moly steel 12-point nuts and parallel-ground washers. They are black oxide finished for extra durability.
ARP 2000 Material
220,000 PSI Tensile Strength
Chrome-moly Steel, 12-Point Nuts
Dorman 03417B Exhaust Manifold Bolts292671.00
The Dorman 03417B Exhaust Manifold Bolts for your 2004.5-2018 Dodge 5.9L and 6.7L Cummins take the hassle out of re-installing your exhaust manifold. Save time and energy by having the right hardware on hand when you need it.
10.9 Bolt Grade
Manifold To Cylinder Head Bolts
Replaces OE Part#: 05012557-AA, 5012557AA
Fleece FPE-34211 Dual Pump Spoke Pulley347763.00
The Fleece FPE-34211 Dual Pump Spoke Pulley is designed for use on your 2003-2016 Dodge 5.9L/6.7L Cummins with the Fleece Dual Pump Bracket. This Pulley is specially machined with a spoke design and is ready for use in your dual pump setup. Features:Dual CP3 PulleyFor Use With Fleece Dual Pump BracketColor Options:FPE-34211-BLK-SPK - BlackFPE-34211-BLU-SPK - Blue FPE-34211-ORG-SPK Orange FPE-34211-RED-SPK - Red Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head)441981.00
Upgrade the rusty or broken exhaust manifold studs on your 1994-2018 Dodge Cummins 5.9L/6.7L with a Fleece FPE-34771 Exhaust Manifold Stud Kit (7mm External Hex Head). These exhaust manifold studs are constructed from aged 603 stainless steel and feature a 7 mm external hex head for easy installation. The Stainless Steel is not only rust and corrosion resistant so these studs always look good, but they are also stronger than the factory bolts and allow for a higher clamping force and easier installation.Features:7mm External Hex HeadAged 603 Stainless Steel12 Point Nuts and Washers IncludedHigher Clamping Force (Torque to 40ft/lbs using Anti-Seize)Application Note:Cummins 5.9L 12V (1994 - 1998) - Aftermarket exhaust manifold onlyCummins 5.9L 24V (1998.5 - 2002)Cummins 5.9L 24V (2003 - 2007) - Requires removal of factory heat shieldCummins 6.7L 24V (2007.5 - 2018) Fleece FPE-34772 Exhaust Manifold Stud Kit (4mm Allen Socket Head)441991.00
If you broke an exhaust manifold stud on your 1994-2018 Dodge Cummins 5.9L/6.7L it’s time to upgrade to a Fleece FPE-34772 Exhaust Manifold Stud Kit (4mm Allen Socket Head). The Fleece exhaust manifold studs are manufactured from a high quality aged 603 stainless steel and feature a 4 mm external hex head for easy installation. The Stainless Steel is impervious to rust and corrosion so the studs won’t corrode over time, but they are also stronger than the stock OEM bolts which allows for a higher clamping force and easier installation.Features:4mm Allen Socket HeadAged 603 Stainless Steel12 Point Nuts and Washers IncludedHigher Clamping Force (Torque to 40ft/lbs using Anti-Seize)Application Note:Cummins 5.9L 12V (1994 - 1998) - Aftermarket exhaust manifold onlyCummins 5.9L 24V (1998.5 - 2002)Cummins 5.9L 24V (2003 - 2007) - Requires removal of factory heat shieldCummins 6.7L 24V (2007.5 - 2018) MAHLE Cylinder Head Bolts GS33493134938.00
The MAHLE Cylinder Head Bolts GS33493 for your 1998.5-2013 Dodge Ram 5.9L/6.7L Cummins offer you an affordable replacement for the factory head bolts. Because these are an OEM Replacement, they are best used in stock applications.
Automotive Item Grade:
OEM Part No.
Comp Part No.
CUMMINS ENGINE CO.
FEL-PRO INC.XDP Exhaust Manifold Installation Bolt Kit XD230330281.00
Don't reuse the old, corroded bolts when installing a new exhaust manifold on your 1989-2018 Dodge 5.9/6.7L Cummins, replace them with the XDP Exhaust Manifold Installation Bolt Kit XD230. This kit includes (12) stainless steel allen head bolts and (12) stainless steel lock washers so you can install your new aftermarket exhaust manifold, with brand new hardware.
Stainless Steel Construction
Includes Anti-Seize Lubricant
(12) Allen Head Bolts and Lock Washers
Note: This kit is intended for use on aftermarket exhaust manifolds and will not work with the stock manifold, or with the stock spacers. Due to different model years, and configurations, there are some instances where the factory supplied hardware is re-used and may take place of a bolt. In those situations, not all the bolts within this kit will be needed.
Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.