Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 49-02003 ATLAS 4" Turbo-Back Exhaust System 11108 80.00 AFE 49-02003 ATLAS 4" Turbo-Back Exhaust System
5 5 1
$ 412.96
The AFE 49-02003 ATLAS 4" Turbo-Back Exhaust System for your 2004.5-2009 Dodge 5.9L/6.7L Cummins is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4 aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free installation. To provide a leak-free seal, OE style band clamps are used that offer a 360º sealing area vs. cheap U-bolt clamps used in other systems. A 12" free-flowing straight-through designed muffler is used to produce a deep, powerful sound. Systems are available in 4 turbo back or 4 down pipe back with or without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps are used for a complete 360º sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: Fits Both 5.9L and 6.7L Cummins Aluminized Steel Construction 4" Turbo-Back System Options With Muffler 49-02003 Without Muffler 49-02003NM Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-02016 ATLAS 5" DPF-Back Exhaust System 31435 31.00 AFE 49-02016 ATLAS 5" DPF-Back Exhaust System
$ 393.3
Interested in a new exhaust system for your 2007.5-2012 Dodge 6.7L Cummins? Check out the 49-02016 ATLAS 5" DPF-Back Exhaust System system by aFe. This system is constructed from 5" mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. Features: 5" Aluminized Construction DPF-Back Exhaust System Mandrel-Bent For Maximum Flow
AFE 49-02030 ATLAS 5" Turbo-Back Race Exhaust System 33183 93.00 AFE 49-02030 ATLAS 5" Turbo-Back Race Exhaust System
$ 681.29
Give your 2007.5-2012 Dodge Ram 6.7L Cummins a deep and throaty sound with the AFE 49-02030 ATLAS 5" Turbo-Back Race Exhaust System. Constructed from 5" aluminized steel tubing, this exhaust system features free-flowing mandrel-bent tubing for maximum flow and performance gains. Designed with ease of install in mind, each kit reinstalls on your truck using OE style bayonet hangers, and high quality band clamps for a secure, bolt-on installation. Simple Installation All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal High quality band clamps are included for a complete 360 degree sealing surface. OE Fit OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This ATLAS exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. High Flow Aluminized Muffler This aluminized steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of aluminized steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 7" Round x 24" L Body Diameter. Features: 5" Turbo-Back Race Exhaust High-Flow Aluminized Performance Muffler Mandrel-Bent Aluminized Steel Construction Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-02030NM ATLAS 5" Turbo-Back No Muffler Race Exhaust System 14613 82.00 AFE 49-02030NM ATLAS 5" Turbo-Back No Muffler Race Exhaust System
$ 595.5
The AFE 49-02030NM ATLAS 5" Turbo-Back No Muffler Race Exhaust System for your 2007.5-2012 Dodge 6.7L Cummins is engineered to perform in the most extreme environments. This race exhaust system is constructed from mandrel bent 5" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. This system is available in 5" turbo-back without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler eliminator-pipe is used for a true race-inspired sound and maximum flow. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of 5" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 5" Aluminized Steel Turbo-Back Race Exhaust System Muffler Eliminator Pipe Included Bayonet OE Style / Welded On Hangers All Hardware Included Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-02039 ATLAS 5" Filter-Back Exhaust System 23548 14.00 AFE 49-02039 ATLAS 5" Filter-Back Exhaust System
$ 393.3
AFE 49-02039 ATLAS 5" Filter-Back Exhaust System for your 2013-2018 Dodge 6.7L Cummins is designed to increase flow and performance. Featuring a durable, mandrel-bent aluminized steel construction, this exhaust system features high-quality band clamps and OE style bayonet hangers. Along with a specially formed end connection to attach directly to your DPF, this exhaust system performs better than stock but installs with factory-like fit and precision.OE Fit:OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.Specially Formed End Connection:A specially formed end connection was designed which helps the exhaust system attach directly to the DPF.Flow and Performance:This ATLAS exhaust system is constructed of 5" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs.Simple Installation:All systems use factory mounting locations providing stability and hassle-free installation.Features: Filter-Back Direct Bolt-On 5" Aluminized Steel Construction Exhaust Tip OptionsNo Tip - 49-02039Polished Tip - 49-02039-PBlack Tip - 49-02039-B
AFE 49-02047 ATLAS 5" Turbo-Back Race Exhaust System 33182 96.00 AFE 49-02047 ATLAS 5" Turbo-Back Race Exhaust System
$ 681.29
Give your 2013-2018 Dodge Ram 6.7L Cummins a deep and throaty sound with the AFE 49-02047 ATLAS 5" Turbo-Back Race Exhaust System. Constructed from 5" aluminized steel tubing, this exhaust system features free-flowing mandrel-bent tubing for maximum flow and performance gains. Designed with ease of install in mind, each kit installs on your truck using OE style bayonet hangers, and high quality band clamps for a secure, bolt-on installation. Simple Installation All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal High quality band clamps are included for a complete 360 degree sealing surface. OE Fit OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This ATLAS exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. High Flow Aluminized Muffler This aluminized steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of aluminized steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 7" Round x 24" L Body Diameter. Features: 5" Turbo-Back Race Exhaust High-Flow Aluminized Performance Muffler Mandrel-Bent Aluminized Steel Construction Fitment Note: Fits Crew Cab Short/Long Beds and Mega Cabs (140 /140.4 , 148.9 /149.3'', 168.9 /169.3, 160 /160.5 Wheel Bases) Dually and 5th Wheel Tow Packages. Fits coil and leaf spring suspensions. Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-02047NM-1 ATLAS 5" Turbo-Back No Muffler Race Exhaust System 25900 85.00 AFE 49-02047NM-1 ATLAS 5" Turbo-Back No Muffler Race Exhaust System
3 5 1
$ 595.5
The AFE 49-02047NM-1 ATLAS 5" Turbo-Back No Muffler Race Exhaust System for your 2013-2018 Dodge Ram 6.7 Cummins features a true 5" design from the turbo-back. The ATLAS exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 5" aluminized steel tubing for maximum flow, increased horsepower, increased torque and reduced EGTs. This "straight-pipe" kit comes without a muffler or exhaust tip (sold separately). ATLAS exhaust systems are the perfect combination of performance, fit and value.Installation is a Snap:ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation.Leak-Free Seal:High quality OE style flange and band clamps are used for a complete 360 degree sealing surface.Aggressive Sound:A muffler delete-pipe is used in place of the muffler for a true race-inspired sound and maximum flow.OE Fit:OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance:ATLAS exhaust systems are constructed of 5" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and reduced EGTs.Features:Constructed of 5" mandrel-bent aluminized steel tubing for maximum flowHigh quality OE style flanges are used for a complete 360 degree sealing surfaceOE style bayonet hangers are used to maintain a stable pipe locationIncludes a muffler delete-pipeUses factory mounting locations providing stability and a hassle-free installationFitment Note: Fits both Coil and Leaf Spring Suspensions - Crew Cab Short/Long Beds and Mega Cabs (excluding Cab and Chassis) (140/140.4, 148.9/149.3, 168.9/169.3, 160/160.5 Wheel Bases )Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-02051-1 ATLAS 5" DPF-Back Exhaust System 28068 37.00 AFE 49-02051-1 ATLAS 5" DPF-Back Exhaust System
5 5 1
$ 342
The AFE 49-02051-1 ATLAS 5" DPF-Back Exhaust System adds performance and styling to your 2013-2018 Dodge Ram 6.7L Cummins. Built from 5" mandrel-bent aluminized steel tubing, this exhaust system is designed as a bolt-on replacement and installs easily by re-using factory mounting locations. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. This kit includes an extension pipe for crew cab/long beds. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This Atlas exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility. Limited 2-year warranty. Features: 5" Mandrel-Bent Aluminized Construction Fits Both Coil and Leaf Sprung Suspensions Fits Crew Cab, Short Bed, Long Bed and Dually Your Choice Of 6" Polished Or Black Exhaust Tip High Quality Band Clamps and OE-Style Bayonet Hangers Uses Factory Mounting Locations For Hassle Free Installation
AFE 49-02054 ATLAS 4" Turbo-Back Race Exhaust System 28365 77.00 AFE 49-02054 ATLAS 4" Turbo-Back Race Exhaust System
$ 466.83
The AFE 49-02054 ATLAS 4" Turbo-Back Race Exhaust System for your 2013-2018 Dodge Ram 6.7L Cummins features a 4" mandrel-bent aluminized construction for maximum flow, increased torque, and lower EGT's. This turbo-back exhaust system includes a free-flowing aluminized muffler and uses all factory mounting locations for a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. Exhaust tip not included. Installation is a Snap: This ATLAS exhaust system includes an extension pipe to fit multiple cab configuration and uses factory mounting locations providing stability and hassle-free installation. Aluminized Muffler A free-flowing aluminized muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Flow and Performance: This ATLAS exhaust system is constructed of 4" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. OE Fitment: OE-style hangers with bayonet tip are used to maintain a stable pipe location during high vibration and high heat conditions. Features: Turbo-Back Race Exhaust 4" Mandrel-Bent Aluminized Construction Aluminized Free-Flowing Performance Muffler Uses Factory Mounting Points For Hassle-Free Installation Note: This system fits Crew Cab Short Beds/Long Beds, Crew Cab Dually and Mega Cab Standard Beds (149.5", 160.5" and 169.5" Wheel Bases). Fits both rear coil and leaf spring suspensions Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-02054NM ATLAS 4" Turbo-Back No Muffler Race Exhaust System 28364 68.00 AFE 49-02054NM ATLAS 4" Turbo-Back No Muffler Race Exhaust System
$ 412.96
The AFE 49-02054NM ATLAS 4" Turbo-Back No Muffler Race Exhaust System for your 2013-2018 Dodge Ram 6.7L Cummins features a 4" mandrel-bent aluminized construction for maximum flow, horsepower, increased torque, and lower EGT's. This "straight-pipe" turbo-back race exhaust system includes a muffler delete-pipe for true race-inspired sound and maximum flow. ATLAS exhaust systems are the perfect combination of performance, fit and value. Exhaust tip not included. Limited 2-year warranty. Installation is a Snap: This ATLAS exhaust system includes an extension pipe to fit multiple cab configuration and uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler delete-pipe is used in place of the muffler for a true race-inspired sound and maximum flow. OE Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of 4" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and reduced EGTs. Features: Turbo-Back Race Exhaust 4" Mandrel-Bent Aluminized Construction "Straight-Pipe" No-Muffler Exhaust System Uses Factory Mounting Points For Hassle-Free Installation Fitment Note: This system fits Crew Cab Short Beds/Long Beds, Crew Cab Dually and Mega Cab Standard Beds (149.5", 160.5" and 169.5" Wheel Bases). Fits rear coil and leaf spring suspensions. Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-02058 ATLAS 4" Turbo-Back Race Exhaust System 33324 74.00 AFE 49-02058 ATLAS 4" Turbo-Back Race Exhaust System
$ 466.83
The AFE 49-02058 ATLAS 4" Turbo-Back Race Exhaust System gives maximum flow in your 2004.5-2012 Dodge 5.9L and 6.7L Cummins. AFE ATLAS exhaust systems are constructed from 4" mandrel-bent aluminized steel tubing. Using high quality band clamps, and OE style bayonet hangers, this exhaust system installs easily to factory mounting locations for a hassle-free installation. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 4" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. High Flow Alumizined Muffler: This aluminized steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of brushed finished aluminized steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 7" Round x 24" L Body Diameter. Features: Turbo-Back Exhaust System 4" Mandrel-Bent Aluminized Steel Tubing OE-Style Bayonet Hangers For Secure Mounting High Quality Band Clamps For 360-Degree Sealing Surface Application Note: All Cabs and Beds applies to Dodge Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models. 2007.5-2012 6.7L engines require use of aftermarket performance programmer with off-road tuning.
AFE 49-02058NM ATLAS 4" Turbo-Back No Muffler Race Exhaust System 33323 64.00 AFE 49-02058NM ATLAS 4" Turbo-Back No Muffler Race Exhaust System
5 5 1
$ 412.96
The AFE 49-02058NM ATLAS 4" Turbo-Back No Muffler Race Exhaust System gives maximum flow in your 2004.5-2012 Dodge 5.9L and 6.7L Cummins. AFE ATLAS exhaust systems are constructed from 4" mandrel-bent aluminized steel tubing. Using high quality band clamps, and OE style bayonet hangers, this exhaust system installs easily to factory mounting locations for a hassle-free installation. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 4" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: "Straight-Pipe" No-Muffler Turbo-Back Exhaust System 4" Mandrel-Bent Aluminized Steel Tubing OE-Style Bayonet Hangers For Secure Mounting High Quality Band Clamps For 360-Degree Sealing Surface Application Note: All Cabs and Beds applies to Dodge Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models. 2007.5-2012 6.7L engines require use of aftermarket performance programmer with off-road tuning.
AFE 49-12009-1 LARGE Bore HD 4" Turbo-Back Race Exhaust System 25826 82.00 AFE 49-12009-1 LARGE Bore HD 4" Turbo-Back Race Exhaust System
$ 605.48
The AFE 49-12009-1 LARGE Bore HD 4" Turbo-Back Race Exhaust System for your 2007.5-2012 Dodge 6.7L Cummins is engineered to perform in the most extreme competitive environments. This race exhaust system is constructed from mandrel bent 4" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. LARGE Bore HD exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: LARGE Bore HD exhaust systems are constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. This exhaust system fits standard Ram 2500/3500 pickups. It is not intended for, nor will it fit on Cab and Chassis models. Features: 4" Stainless Steel Construction Free-Flow Race Exhaust Turbo Back, With Muffler and Polished Tip Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-42006 4" Large Bore HD Filter-Back Exhaust 35873 43.00 AFE 49-42006 4" Large Bore HD Filter-Back Exhaust
$ 362.9
Purchase the AFE 49-42006-P 4" Large Bore HD Filter-Back Exhaust with Polished Tip for your 2007.5-2012 Dodge 6.7L Cummins. The Filter-Back Exhaust with Exhaust Tip is a DPF-back exhaust that is constructed from 4" 409 stainless steel tubing that is mandrel bent and is 100% hand MIG-welded for increased strength and durability. The specially engineered, nonrestrictive design provides your Cummins with 22% more exhaust flow for a better performance and sound. The exhaust system is completed with a 5” intercooled exhaust tip that comes with a sleek black or polished look that reduces EGT’s. Installation is a breeze because the Filter-Back Exhaust uses the factory mounting locations and uses the high quality hardware for a convenient installation. Features:Mandrel Bent TubingIncreased Performance 5” Intercooled Exhaust Tip22% Better Exhaust Flow Compared To OEM
AFE 49-42006 MACH Force XP 4" DPF-Back Exhaust System 2053 43.00 AFE 49-42006 MACH Force XP 4" DPF-Back Exhaust System
$ 485.45
The AFE 49-42006 MACH Force XP 4" DPF-Back Exhaust System for your 07.5-12 Dodge 6.7L Cummins is engineered to perform in the most extreme environments. This system is constructed from 4" mandrel bent 409 stainless steel tubing for 22% more flow, increased horsepower, increased torque and reduced EGT's. This system is finished off with a 6" 304 stainless steel intercooled polished tip. MACH Force XP exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler delete-pipe is used for a true race-inspired sound and maximum flow. OE Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: Mach FORCE XP exhaust systems are constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and reduced EGTs. 6" Polished Tip: Finishing off the exhaust is a high luster, 6" polished 304 stainless steel slash cut tip. This tip also features a drain port on the bottom to keep rust and corrosion away. Features: 409 Stainless Steel 4" Mandrel Bent Construction Direct Bolt-On, DPF-Back System Polished, Intercooled Tip Note: All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-42009-1 MACH Force XP 4" Turbo-Back Race Exhaust System 5593 86.00 AFE 49-42009-1 MACH Force XP 4" Turbo-Back Race Exhaust System
4 5 2
$ 691.26
The AFE 49-42009-1 MACH Force XP 4" Turbo-Back Race Exhaust System for your 2007.5-2012 Dodge 6.7L Cummins is engineered to perform in the most grueling competition environments. This race exhaust system is built from mandrel bent 4" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Muffler delete-pipe is also included for those who prefer a true race-inspired sound and maximum flow. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: MACH Force XP exhaust systems are constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" Stainless Steel Construction Includes Muffler and Muffler Delete Pipe Off-Road / Race Exhaust System Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not designed for use on Cab and Chassis models.
AFE 49-42010NM-1 MACH Force XP 4" Turbo-Back No Muffler Race Exhaust 25827 65.00 AFE 49-42010NM-1 MACH Force XP 4" Turbo-Back No Muffler Race Exhaust
$ 616.45
The AFE 49-42010NM-1 MACH Force XP 4" Turbo-Back No Muffler Race Exhaust System for your 2007.5-2012 Dodge 6.7L Cummins is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4" 409 stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. Systems are available in 4" turbo-back without muffler. MACH Force XP exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler delete-pipe is used for a true race-inspired sound and maximum flow. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: MACH Force XP exhaust systems are constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" Stainless Steel Construction Mandrel Bent For Maximum Flow Race Exhaust - For Off-Road Competitive Use Only Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-42016 Large Bore HD 5" DPF-Back Exhaust System 4344 45.00 AFE 49-42016 Large Bore HD 5" DPF-Back Exhaust System
1.5 5 2
$ 444.6
The AFE 49-42016 Large Bore HD 5" DPF-Back Exhaust System is built specially 2007.5-2012 Dodge 6.7L Cummins. This system is constructed from 5" mandrel-bent 409 stainless steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This Large Bore-HD exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. Features: Bolt-On Installation 5" 409 Stainless Steel DPF-Back Exhaust System
AFE 49-42030-P MACH Force XP 5" Turbo-Back Exhaust System 14614 99.00 AFE 49-42030-P MACH Force XP 5" Turbo-Back Exhaust System
4 5 1
$ 970.56
The AFE49-42030-P MACH Force XP 5" Turbo-Back Race Exhaust System for your 07.5-12 Dodge 6.7L Cummins is a true 5" from the turbo-back, the MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 5" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. This system is available in 5" turbo-back with muffler and polished tip. MACH Force XP exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: MACH Force XP exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A free-flowing 24"" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: MACH Force XP exhaust systems are constructed of 5"" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 5" Turbo-Back Stainless Steel Race Exhaust System Stainless Steel Band Clamps Bayonet OE Style / Welded-On Hangers Free-Flow Muffler Direct Bolt-On Complete w/ Polished AFE Power Badge Logo Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-42039 MACH Force XP 5" Filter-Back Exhaust System 23544 34.00 AFE 49-42039 MACH Force XP 5" Filter-Back Exhaust System
$ 444.6
The AFE 49-42039 MACH Force XP 5" Filter-Back Exhaust System for your 2013-2018 Dodge 6.7L Cummins is designed to increase flow and performance. Featuring a durable, mandrel-bent stainless steel construction, this exhaust system features high-quality band clamps and OE style bayonet hangers. Along with a specially formed end connection to attach directly to your DPF, this exhaust system performs better than stock but installs with factory-like fit and precision.OE Fit:OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.Specially Formed End Connection:A specially formed end connection was designed which helps the exhaust system attach directly to the DPF.Flow and Performance:This Mach FORCE-Xp exhaust system is constructed of 5" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs.Simple Installation:All systems use factory mounting locations providing stability and hassle-free installation.Features: Filter-Back Direct Bolt-On 5" Stainless Steel Construction Exhaust Tip OptionsNo Tip - 49-42039Polished - Tip 49-42039-PBlack Tip - 49-42039-B
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.