Eliminate the issues with leaking Oil Drain Plugs in your 2002-2019 Dodge 5.9L and 6.7L Cummins with the Dorman 090-173 Oil Drain Plug. The Dorman Oil Drain Plug features an inset, molded gasket for sealing, and a magnetic tip to pick up metallic debris. Each plug is coated for corrosion resistance. This Drain Plug comes as a pack of 10 and is perfect for the professional shop or DIY Cummins owner. Due to the built-in gasket many Cummins owners replace these plugs over the lifetime of their engine as a cheap way to ensure that they maintain a leak-free seal. Features:10-PackMagnetic TipInset, Molded GasketCorrosion Resistant Coating Head Size: 31.25 MM Thread Size: M18 x 1.50Application Notes: Chrysler Cross Reference Part#: 5080631AA, 5080631AB, 68210509AAFumoto Engine Oil Drain Valve F-104128751.00
Introducing the best way to change oil, the Engine Oil Drain Valve. Install this valve and you can drain your engine oil without tools and without mess. Just lift the lever of this solid brass ball valve and give it a quarter turn to open it. Return the lever to its original position and it locks closed, double sealed to prevent leakage. The Engine Oil Drain Valve is made of corrosion resistant forged brass and stainless steel. The ball valve design provides a straight flow for efficient drainage and a perfect seal when closed. Frozen drain plug and stripped threads are eliminated forever. Drawing samples for oil analysis is as easy as one-two-three. Sizes to fit all cars, light trucks vans heavy-duty trucks and buses. Also fits RVs, marine engines and industrial equipment.
The Engine Oil Drain Valve has been tested and granted "Genuine Parts" status by 6 major motor vehicle manufacturers in Japan, including Toyota, Nissan, Mazda, Mitsubishi, Subaru and Isuzu. These approvals were not granted easily and gaining them was a testimony to the quality and durability of Engine Oil Drain Valve. In the United States, the Engine Oil Drain Valve is being installed at the factory level on some of the vehicles/equipment made by Ford, Kohler, Freightliner, Caterpillar, JLG, GEHL, Ingersoll-Rand, Sullair, Toyota, Case, Magnetek, Timberjack, Lincoln Electric, Vermeer, Baldor, Terex, Deutz, Phaser Marine Generator and etc.
Remove original drain plug and drain oil into acceptable receptacle.
Insert Engine Oil Drain Valve with gasket* and tighten. Do not over tighten.
Make sure valve is closed and refill crankcase.
N-Series Valve: Unlike the standard Engine Oil Drain Valve which was designed for automobile and truck applications, the N-SERIES valve is equipped with a Nipple to enable the operator to attach a hose and drain the engine oil out of tight spots and away where access to the plug itself and resulting mess are often problems. Like the standard Engine Oil Drain Valve, this spring assisted ball valve replace standard oil drain plug making oil changes easier and saving valuable time. Also ideal for oil sampling analysis as a small amount of oil can be drawn without shutting off the engine. The N-SERIES Engine Oil Drain Valve takes the mess out of routine maintenance on industrial engines. "N-SERIES" valves are not recommended for cars with low ground clearance. Please make sure there is enough distance from the ground.
For users under extreme conditions:
If you are using the Engine Oil Drain Valve on off-road vehicles such as farm tractors and logging equipment under extreme environment (i.e. corn fields, brush areas), it is recommended that a hose clip as shown below be used for extra safety and security. The hose clip, which can be purchased at any hardware stores, will firmly keep the lever in the locked position at all times.
Fumoto Engineering of America offers a LIFE TIME WARRANTY on its product, against faulty workmanship and/or material to the original purchaser (with proof of purchase). For any defective product, Fumoto Engineering of America will replace the product at no charge. Fumoto Engineering of America will also indemnify any consequential damages to the engine/vehicle which are directly caused by the defective product. This warranty does not cover any damages due to misuse, abuse, negligence or accident. This warranty is valid only in the United States and Canada.
Application includes: 89-93 5.9L Dodge Cummins, 2002 and Up Dodge 5.9L/6.7L Cummins
Thread Size: 18mm-1.5
Mishimoto MMODP-1815B Magnetic Oil Drain Plug233361.00
The Mishimoto MMODP-1815B Magnetic Oil Drain Plug for your 89-93 and 02-13 Dodge 5.9L/6.7L Cummins is designed to remove metal fragments in engine oil, thus extending and protecting the life of your engine.These oil drain plugs are constructed from billet 6061 aluminum with a powerful neodymium magnet. The magnet provides the strength to seize and collect bearing or other harmful metallic fragments in engine oil, effectively removing them from circulation. This drain plug features a robust 24 mm hex head and precise, durable threads for consistent use without fear of stripping. Mishimoto Magnetic Oil Drain Plugs include a dependable dowty seal for superior protection against leaks. This M18 x 1.5 Mishimoto Magnetic Oil Drain Plug is perfect for extending the life of your vehicle and includes the Mishimoto Lifetime Warranty!
6061 Aluminum Construction
Constructed with a neodymium magnet
Reduces metal debris in your engine
Increases engine life
Dowty oil seal included
Mishimoto Lifetime Warranty
Mishimoto Performance (MP), warrants all of its products under its
'no questions asked' limited lifetime warranty policy. Regardless of
the defect in product, Mishimoto will replace the original product.
Warranty claims must be accompanied by the original sales receipt from
an authorized dealer. A trained professional should install all MP products. Any issues
with compatibility or installation should be addressed before attempting
to install the product.
The purchaser's remedy for breach of this limited warranty,
exclusive of all other remedies provided by law, is expressly limited to
repair or replacement of any part or parts. All products returned for
warranty consideration must be returned to MP with all transportation
MP shall not be responsible for damages to its products or injury
to persons using the products in any manner that would constitute
improper operation, including but not limited to: incorrect opening of
radiator pressure caps, burst hoses, unintended application or usage not
intended by MP, negligence, improper installation, or any other use
that may cause damages or injury. MP shall not be responsible for injury
or harm to persons or property when caused by persons or vehicles using