Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

CP3 Pumps & Upgrades

New Product Filters!
ATS 7010192272 Twin Fueler Electronic Control Box 34188 0.00 ATS 7010192272 Twin Fueler Electronic Control Box
$ 204.25
The ATS ATS7010192272 Twin Fueler Electronic Control Box for your 2003-2015 Dodge 5.9L/6.7L Cummins controls your second high pressure fuel pump, allowing precise rail pressure control with the Twin Fueler Fuel system. The Twin Fueler Electronic Control Box is a completely Plug and Play installation. Simply connect to your factory fuel control actuator (FCA), connect to the second high pressure pump FCA and supply battery power and ground. This will allow the Twin Fueler pump to control pressure, giving better drive-ability as well as the added power when desired! Features:Easy InstallationFor Use In Dual CP3 SystemsAllows Precise Rail Pressure Control
ATS 7018002326 Twin Fueler Installation Kit 18185 21.00 ATS 7018002326 Twin Fueler Installation Kit
$ 1309.75
The ATS 7018002326 Twin Fueler Installation Kit (w/o Pump) for the 2007.5-2009 6.7L Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fuel lines, and a true twin system, the ATS kit allows for huge amounts of power and reliability. When it comes to optimizing a Common Rail Injection System, rail pressure gets talked about a lot. Pressure is in fact extremely important, however, it is not the only important aspect. Equally, fuel volume is the actual additional amount of fuel you are able to add in to the cylinders during injection. This is going to to have massive impact on your final ability to create power. Ultimately, your truck needs fuel pressure to properly atomize the added fuel volume that you introduce. Not all modified CP3 kits or dual CP3 kits have this capability like the ATS Twin CP3 System does. Additionally, the billet aluminum wheel, is sized proportionally to the factory CP3, allowing better equalization of the rails. Generally, this will not matter so much as the regulators will control the amount of fuel regardless, however, it is attention to detail such as this that sets the ATS kit apart from the others. This kit does not require removal of any emissions equipment. Features: Increases Fuel Volume Maintains Stock Fuel Pressure Increases Performance Increases Reliability Note: This installation kit is sold without a pump. You must provide the 2nd pump. This kit is designed to us an LBZ/LMM Duramax CP3 Pump (GM Part# 97361351). Use of another pump can result in fuel line misalignment.
ATS 7018002356 Twin Fueler Installation Kit 20764 22.00 ATS 7018002356 Twin Fueler Installation Kit
$ 1309.75
The ATS 7018002356 Twin Fueler Installation Kit for your 10-15 Cummins allows you to easily install a Dual CP3 Setup on your truck. This kit doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fuel lines, and a true twin system, the ATS kit allows for huge amounts of power and reliability. When it comes to optimizing a Common Rail Injection System, rail pressure gets talked about a lot. Pressure is in fact extremely important, however, it is not the only important aspect. Equally, fuel volume is the actual additional amount of fuel you are able to add in to the cylinders during injection. This is going to to have massive impact on your final ability to create power. Ultimately, your truck needs fuel pressure to properly atomize the added fuel volume that you introduce. Not all modified CP3 kits or dual CP3 kits have this capability like the ATS Twin CP3 System does. Additionally, the billet aluminum wheel, is sized proportionally to the factory CP3, allowing better equalization of the rails. Generally, this will not matter so much as the regulators will control the amount of fuel regardless, however, it is attention to detail such as this that sets the ATS kit apart from the others. This kit does not require removal of any emissions equipment. Twin CP3 Injection Pump Kit, 2010-15 Dodge 6.7L. Includes: injection pump, billet pulley, all hardware, and electronics to complete the installation. Features: Increases fuel volume Maintains stock fuel pressure Increases performance Increases reliability Note: Designed for use with the stock intake manifold. This installation kit is sold without a pump. You must provide the 2nd pump. This kit is designed to us an LBZ/LMM Duramax CP3 Pump (GM Part# 97361351). Use of another pump can result in fuel line misalignment.
ATS 7019002326 Twin Fueler Dual Pump Kit (With Pump) 12925 42.00 ATS 7019002326 Twin Fueler Dual Pump Kit (With Pump)
$ 2115
The ATS 7019002326 Twin Fueler Dual Pump Kit for your 2007.5-2009 Dodge 6.7L Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fuel lines, and a true twin system, the ATS kit allows for huge amounts of power and reliability. When it comes to optimizing a Common Rail Injection System, rail pressure gets talked about a lot. Pressure is in fact extremely important, however, it is not the only important aspect. Equally, fuel volume is the actual additional amount of fuel you are able to add in to the cylinders during injection. This is going to to have massive impact on your final ability to create power. Ultimately, your truck needs fuel pressure to properly atomize the added fuel volume that you introduce. Not all modified CP3 kits or dual CP3 kits have this capability like the ATS Twin CP3 System does. Additionally, the billet aluminum wheel, is sized proportionally to the factory CP3, allowing better equalization of the rails. Generally, this will not matter so much as the regulators will control the amount of fuel regardless, however, it is attention to detail such as this that sets the ATS kit apart from the others. This kit does not require removal of any emissions equipment. Features: Increases Fuel Volume Maintains Stock Fuel Pressure Increases Performance Increases Reliability Note: This kit is designed for use with a stock intake manifold.
ATS 7019002356 Twin Fueler Dual Pump Kit (With Pump) 18197 42.00 ATS 7019002356 Twin Fueler Dual Pump Kit (With Pump)
$ 2115
The ATS 7019002356 Twin Fueler Dual Pump Kit (With Pump) for you 2010-2015 Dodge 6.7 Cummins doubles the fueling capability when running large tunes and bigger injectors. The system is not only designed to work in conjunction with the factory CP3, but it also maximizes the system. Utilizing ported rail fitting, larger diameter high pressure fuel lines, and a true twin system, the ATS kit allows for huge amounts of power and reliability. When it comes to optimizing a Common Rail Injection System, rail pressure gets talked about a lot. Pressure is in fact extremely important, however, it is not the only important aspect. Equally, fuel volume is the actual additional amount of fuel you are able to add in to the cylinders during injection. This is going to to have massive impact on your final ability to create power. Ultimately, your truck needs fuel pressure to properly atomize the added fuel volume that you introduce. Not all modified CP3 kits or dual CP3 kits have this capability like the ATS Twin CP3 System does. Additionally, the billet aluminum wheel, is sized proportionally to the factory CP3, allowing better equalization of the rails. Generally, this will not matter so much as the regulators will control the amount of fuel regardless, however, it is attention to detail such as this that sets the ATS kit apart from the others. This kit does not require removal of any emissions equipment. Twin CP3 Injection Pump Kit, 2010-11 Dodge 6.7L. Includes: injection pump, billet pulley, all hardware, and electronics to complete the installation. Features: Increases fuel volume Maintains stock fuel pressure Increases performance Increases reliability Everything's included for easy installation Note: This kit is designed for use with the stock intake manifold.
BD-Power 1050106 Remanufactured CP3 Pump 19770 14.00 BD-Power 1050106 Remanufactured CP3 Pump
$ 659
The BD-Power 1050106 CP3 pump is remanufactured to BD-Power's stringent specifications for your 2007.5-2018 Dodge 6.7L Cummins. This pump is offered as a drop-in replacement for your factory CP3. BD Diesel is one of only a few shops with the capability, the know-how and equipment to fully test and rebuild common rail injection components including high pressure CP3 pumps. Features: Remanufactured Pre-Tested Before Shipping Stock HP Level - Factory Replacement
BD-Power 1050475 Venom Dual CP3 Kit 34668 33.00 BD-Power 1050475 Venom Dual CP3 Kit
$ 1895
Eliminate fuel system restriction with the BD-Power 1050475 Venom Dual CP3 Kit and supply your 2005-2009 Dodge 5.9L and 6.7L Cummins with enough fuel for over 1000 HP! Your modified Cummins can easily max out the capabilities of your stock fuel system. Adding an additional CP3 is a sure way to keep consistent pressure, and fuel volume in your common rail system. BD's Venom Dual CP3 Kit includes the components you need to add a Duramax CP3 pump to your existing CP3 so you can feed your engine with the fuel to make 1000HP! Each kit comes ready to install with a Duramax CP3 pump, high quality silicone radiator hose, wiring harness with factory connectors for both pumps, low profile bracket, CP3 pulley, and all other required hardware. Features: Dual CP3 Kit With Pump Supports Over 1000HP+Low Profile Mounting Design Application Note: Aftermarket tuning required.
BD-Power 1050476 Venom Dual CP3 Installation Kit 34669 19.50 BD-Power 1050476 Venom Dual CP3 Installation Kit
$ 995
The BD-Power 1050476 Venom Dual CP3 Installation Kit makes it easy to maximize the potential of the fuel system on your 2005-2009 Dodge 5.9L and 6.7L Cummins. Adding an additional CP3 pump to run in conjunction with your factory high pressure CP3 pump will allows you to support well over 1000HP, and even more if you plan to use dual modified pumps! This Installation Kit includes the hardware that you need for installation such as a high quality silicone radiator hose, wiring harness with factory connectors for both pumps, low profile bracket, CP3 pulley and other required hardware. All you need to do is supply the pump! Features:Install Kit (No Pump)Supports Over 1000HP+ Low Profile Mounting Design Application Note:Aftermarket tuning required. LBZ/LMM Duramax CP3 must be supplied by end user (not included).
BD-Power 1050477 Venom Dual CP3 Kit 34670 33.00 BD-Power 1050477 Venom Dual CP3 Kit
$ 1895
Give your 2010-2012 and 2015-2018 Dodge 6.7L Cummins the fuel to make over 1000HP with the BD-Power 1050477 Venom Dual CP3 Kit. Once you start modifying your Cummins with tuning, injectors, and other power-adders, you can quickly max out the capabilities of your stock fuel system. A dual CP3 system gives you the rail pressure, and fuel volume that you need to push your truck over the edge when it comes to making big power. Each kit comes ready to install with a Duramax CP3 pump, high quality silicone radiator hose, wiring harness with factory connectors, low profile CP3 bracket (works with most aftermarket intake elbows), CP3 pulley, and all other required hardware. Features:Dual CP3 Kit With PumpSupports Over 1000HP+ Low Profile Mounting DesignApplication Note: Aftermarket tuning required.
BD-Power 1050478 Venom Dual CP3 Installation Kit 34671 19.50 BD-Power 1050478 Venom Dual CP3 Installation Kit
$ 995
The BD-Power 1050478 Venom Dual CP3 Installation Kit gives you the hardware needed to add another CP3 on your 2010-2012 and 2015-2018 Dodge 6.7L Cummins. A dual CP3 system is a must for high horsepower trucks, adding in the Duramax CP3 (not included) in conjunction with your factory CP3 will provide you with the fuel needed to support well over 1000HP, and even more with dual modified pumps! BD's Venom Dual CP3 Installation Kit includes the necessary components for installation such as a high quality silicone radiator hose, wiring harness with factory connectors for both pumps, a low profile bracket, CP3 pulley, and the miscellaneous hardware required. All you need to do is supply the pump! Features:Install Kit (No Pump)Supports Over 1000HP+Low Profile Mounting Design Application Note: Aftermarket tuning required.LBZ/LMM Duramax CP3 must be supplied by end user (not included).
BD-Power 1050551 R900 12MM CP3 Pump 20674 14.00 BD-Power 1050551 R900 12MM CP3 Pump
$ 2059
The BD-Power 1050551 R900 12MM CP3 Pump will increase performance in your 2003-2018 Dodge 5.9L/6.7L Cummins. Featuring up to a 72% increase in capacity / displacement, this pump delivers enough fuel to support up to 750hp while maintaining 24,000psi of rail pressure. The R900 pump replaces the existing injection pump and simply bolts in place to produce up to 5.25 LPM versus the stock 3.05 LPM. That's right, all that fuel without going to a dual pump system no extra pulleys, belts or pumps to install. BDs R900 pumps are engineered with an enhanced metering unit and new design cam shaft with modified plungers and stroke. Plus, the HPCPS eliminates the off throttle fuel spikes common with stock pumps that can potentially damage injector nozzle tips when trying to produce more than 500hp. All of these modifications deliver long-term durability with consistent high fuel pressure supply on demand that provides efficient atomization resulting in more power, better combustion and lower EGTs. Designed for street, towing and race track applications, each R900 injection pump is fully tested before leaving our facility Features: Support Up To 750HP Maintains Steady Rail Pressure 12mm Stroke Cam Housing Design
Bostech Fuel Pressure Actuator DEC031241 13155 5.00 Bostech Fuel Pressure Actuator DEC031241
$ 129.95
The Bostech Fuel Pressure Actuator DEC031241 is a direct replacement for your 2007.5-2014 Dodge 6.7L Cummins. This Bostech Fuel Pressure Actuator is built to meet or exceed OE specifications. Features: Stock Replacement Meets Or Exceeds OE Specifications Replaces OE Part#'s: 68005241AA, 0 928 400 642
Bostech HPP7334 Remanufactured CP3 Pump 13146 10.00 Bostech HPP7334 Remanufactured CP3 Pump
$ 619.95
Replace the failing CP3 pump in your 2007.5-2018 Dodge 6.7L Cummins with the Bostech HPP7334 Remanufactured CP3 Pump. Bostech CP3's are remanufactured to stringent specifications. Each unit is 100% inspected and tested for quality and performance. Features: Remanufactured Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part#: R8027022AA, 68027022AA, 0-445-020-076, 0-445-020-106, 0 445 020 146, 0 986 437 334
DDP CP3-334 Remanufactured CP3 Pump 35028 18.00 DDP CP3-334 Remanufactured CP3 Pump
$ 774.25
Restore proper operation to the fuel system in your 2007.5-2018 Dodge 6.7L Cummins with the DDP CP3-334 Remanufactured CP3 Pump. DDP’s CP3 pumps are remanufactured to the highest standards and are backed by a 1-year, unlimited mileage warranty.Features:Remanufactured Stock Replacement1-Year Unlimited Mileage Warranty
DDP NCP3-334 New CP3 Pump 35029 18.00 DDP NCP3-334 New CP3 Pump
$ 1163.75
Restore proper operation to the fuel system in your 2007.5-2018 Dodge 6.7L Cummins with the DDP NCP3-334 New CP3 Pump. DDP’s CP3 pumps are brand new and backed by a 2-year, unlimited mileage warranty.Features:Brand NewNo Core ChargeStock Replacement2-Year Unlimited Mileage Warranty
DDP NCP3-33412 12mm Stroker CP3 Pump 31188 18.00 DDP NCP3-33412 12mm Stroker CP3 Pump
$ 2422.5
Maximize the power and capability of the fuel system in your 2007.5-2018 Dodge 6.7L Cummins with the DDP NCP3-33412. Capable of supporting up to 1,000 rwhp with supporting modifications, this CP3 pump provides full fuel delivery to 6,000+ RPM. Each pump includes a new OEM unmodified FCA for improved tunability. 90-day limited warranty. Features: 12mm Stroker PumpNew, Not RemanufacturedSupports Up To 1,000 RWHP75% More Volume Than Stock Unmodified FCA For Improved Tunability 90-Day Limited Warranty Application Notes: CP3 can be used with a 150 GPH lift pump but for maximum output recommend 200+ GPH lift pump.
Dorman 904-581 Fuel Injection Pressure Regulator 80072 0.80 Dorman 904-581 Fuel Injection Pressure Regulator
$ 194.77
Replace the faulty injection pressure regulator in your 2007.5-2018 Dodge 6.7L Cummins with the Dorman 904-581 Fuel Injection Pressure Regulator. This regulator is a high-quality replacement is tested for reliability and fitment and will help you truck run like it should by regulating the fuel pressure to the injectors. Features:Easy Installation Direct Fit Replacement Quality Tested For Fitment
DTech DT670002R Remanufactured CP3 Pump 10612 20.00 DTech DT670002R Remanufactured CP3 Pump
$ 579.6
The DTech DT670002R Remanufactured CP3 Pump for your 2007.5-2018 Dodge 6.7L Cummins is remanufactured to DTech's stringent specifications to meet the latest standards and improvements. Each pump is completely dismantled and inspected prior to the sub-assembly testing and adjustment stages. Features: Remanufactured Replaces OE# R8027022AB DTech Warranty: Consumer/Non-Professional Installers - 1 Year, Unlimited Mileage Warranty. Professional Shop / Automotive Truck Installers - 2 Years, Unlimited Mileage Warranty. This warranty applies to product used under normal operating conditions and service. Repairs, modification, disassembly or any other alteration of DTech products from their original condition are not covered by this warranty. Warranty will not be extended to failures caused by incorrect installation or application, modification, contamination, negligence or abuse. The warranty does not extend to diagnostic time, incidental or consequential damages.
Fleece 6.7L CP3K Modified CP3 Pump 20141 18.00 Fleece 6.7L CP3K Modified CP3 Pump
5 5 1
$ 1179
The Fleece Performance Cummins 6.7L CP3K is a modified CP3 pump designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range. Features: Eliminates Factory Fuel Flow Restriction Maintains Rail Pressure Through Entire RPM Range
Fleece FPE-34022-PC Dual CP3 Bracket 31556 4.00 Fleece FPE-34022-PC Dual CP3 Bracket
$ 94.99
The Fleece FPE-34022-PC Dual CP3 Bracket is available separately for your 2007.5-2018 Dodge 6.7L Cummins. This bracket is intended for use as a replacement on a Fleece Dual CP3 Kit, or for those building their own kit. Features: Dual CP3 Bracket For Use In Dual CP3 Setups
TAKE 10% OFF SITEWIDE* WITH OUR PRE-BLACK FRIDAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: HOLIDAY10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 11/27/19 only.