Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 536.95
Part #: EP15001

Edge Products 15001 Evolution Programmer

1999-2003 Ford 7.3L Powerstroke
Part #: EP15001
★★★★★ ★★★★★ 25 Reviews
In-Stock
ADD A 1-YEAR XDP Replacement Guarantee! - *VIEW DETAILS*
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The Edge Products 15001 Evolution Programmer for your 1999-2003 Ford 7.3L Powerstroke is the industry's first standalone programmer to display EGTs. The Evolution Programmer re-tunes your truck to maximize performance, fuel economy and also features built-in monitoring capabilities. Plus, it ships with a custom-designed pod to make the Evolution look factory installed.

Advanced Tuning
The Edge Evolution Programmer is loaded with Performance Tunes to increase Horsepower, Torque and overall engine efficiency. 
Along with additional tuning parameters such as the ability to adjust shift points and pressure, and adjustable speed / rev limiter. 

Performance Testing 
The Evolution Programmer features advanced hardware that allows you to test your performance parameters. Test your skills with a 1/4 mile performance, 0-60 MPH tests and reaction times with drag strip style tree lighting. 

Diagnostics 
Also used as a diagnostic tool, the Evolution Programmer can datalog vital engine information and display alerts and records such as RPM, MPH & EGT. The Evolution Programmer will also allow you to read and clear diagnostic trouble codes. 

Parameters Monitored
The Evolution allows the user to view up to 4 PIDs at one time. There are 11 different PIDs to choose from: RPM, Miles Per Hour, Engine Coolant Temp, Boost Pressure, Exhaust Gas Temp, Engine Oil Temp, Transmission Fluid Temp (2001+ Automatics), Intake Air Temp, Barometric Pressure, Battery Voltage, Diagnostic Trouble Codes.

Power Levels
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Evolution module. Power gains may vary based on vehicle and geographical location.

Level 1: 60 HP & 100 Ft-Lbs. 
Level 2: 80 HP & 140 Ft-Lbs. 
Level 3: 100 HP & 200 Ft-lbs.
 
Features: 
Reads & Displays EGT's (Probe Included)
In-Cab Display To Monitor Vital Engine Functions 
3 Adjustable Power Levels (+100 HP & 200Ft-Lbs)
Display & Clear Diagnostic Trouble Codes
Adjustable LED Backlight Color 

Application Notes: 
Some 1999-2000 automatics will not show trans temp. 
Dash Pods may need to be painted to match interior. 

Excursion owners, you must purchase the pod (EP18501) listed below. The one that comes with this unit will not fit your dash. 

Specifications

  • MFG. Number 15001
  • Manufacturer Name Edge Products
  • Shipping Weight 2.00 lb.
  • Shipping Length 10 in.
  • Shipping Width 7 in.
  • Shipping Height 6 in.
  • Fuel Type Diesel
  • EO Number D-541-18
  • UPC 810115010074
  • Warranty Yes
  • Warranty Info 1 Year
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

★★★★★ ★★★★★
4.7/5 Stars out of 25 Reviews
5
22
4
1
3
1
2
0
1
1
New Truck
5
(Spring, TX) | May 3rd, 2009
'00 F250SD 4x4 with an AFE Progaurd 7 cold air kit and just installed a Magnaflo exhaust. But the biggest change for my truck was the Edge Programmer. Installation was a snap. Even tapping the exhaust,(which I hated doing) for the pyrometer was simple, the instruction were well layed out. I tryed it, first time, on level 3. That level lets me know I am in need of a new, heavier clutch for my manual transmission. The transmission can't stick with the engine. I have to take it easy. Well, I keep it at level 2 and it still slips if I don't watch it. It is worth the money.
DAMN!
5
(TEXAS) | June 8th, 2009
i have used superchips before and it wasnt much but with edge wow... i got a 99 f-250 auto and i got single stack, aFe intake, better wastegate, and a high pressure oil crossover line. let my bro try on his 01 f-350 and it is totally stock and he gets 23 mpg i only get 18 with my foot on it...
not for excursion!!
1
(az) | June 8th, 2009
Bought this for my 01 excursion and the truck wouldn't start after trying to program it. something about the factory security. i called XDP and they walked me through getting the truck started again. they even took the unit back and put me into something else. while i was pissed at first XDP did the right thing and took care of me.
Pages 1   2   3   4   5

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Does this tuner adjust line pressure?
View Staff Answer 
Answer

The Edge 15001 has advanced tuning settings to adjust shift points/line pressure.


The EGT probe is installed in the exhaust manifold (located on the driver’s side just above the driveline).

Click Here for the Install Manual
Is the 15001 compatible with an early (8/98) 99 250 SuperDuty Exended Cab (4 door) Lariat 7.3L?
View Staff Answer 
Answer

The Edge Products 15001 Ford Evolution Programmer is compatible on both early and late 99.5 Ford applications.


The EP15001 is a great option for those looking to increase their trucks performance and economy. Whether you truck is high or low mileage it really makes no difference as long as the vehicles is being serviced properly. Electronic performance modifications are by far the most common performance part we sell, and one of the easiest to install. These products create the most noticeable difference in power gains. The EP15001 is considered a “Downloader/Programmer” which works by downloading and storing your stock computer's information, then uploading a new program to the vehicle's ECU. Benefits of these units include no physical parts actually being installed on the vehicle and the overall ease of use.

Can I add a turbo timer onto this model?
View Staff Answer 
Answer

Unfortunately, the Edge EP15001 programmers do not have the option of adding a turbo timer. (Only the CS/CTS Edge Programmers)

I have an 2001 E-350 7.3L, Will this work?
View Staff Answer 
Answer
The Edge Products 15001 Ford Evolution Programmer will only work on the F-Series applications.
What's the best setting for fuel economy?
View Staff Answer 
Answer

We recommend that you experiment with the three different stages to determine which gives you the best fuel economy.

Fuel economy can vary based on driving conditions, vehicle loads, and driving habits. Most users that tow heavy loads, 8,000 lbs or more, report that they get the best fuel mileage on Level 3. Most users that don’t’ tow, or tow light loads infrequently, report that they get the best fuel mileage on Level 1 and 2. The best way to determine the optimum fuel economy for your vehicle and driving conditions is to try each setting.

Will this work with a manuel transmission?
View Staff Answer 
Answer

The Edge Products 15001 Evolution Programmer will work with both the Automatic and Manual transmissions.

Does this programmer have a stock setting?
View Staff Answer 
Answer

The Edge Products 15001 Evolution Programmer has stock program to revert the truck back to factory tuning.

Would you recommend this programmer for a truck that driven daily?
View Staff Answer 
Answer

Absolutely! The Edge Products 15001 Evolution Programmer as well as all of the Edge Products Programmers are completely safe for use on daily driven applications.

Does this programmer come with a STOCK setting?
View Staff Answer 
Answer

Yes, the Edge Products 15001 Evolution Programmer will come with a stock setting along with all of your performance tunes.


Yes, the Edge Products 15001 Evolution Programmer will come with a stock setting along with all of your performance tunes.


Yes, the Edge Products 15001 Evolution Programmer will come with a stock setting along with all of your performance tunes.

Is this programmer VIN locked?
View Staff Answer 
Answer

All Edge Products are sold as Brand New products. (A VIN locked unit is a product that was installed on a vehicle that was never returned back to stock. All programmers lock once installed on a vehicle until that vehicle is returned back to the stock tuning.)

How would the Edge 15001 read boost on a 02 F250 7.3L?
View Staff Answer 
Answer

The Edge Products 15001 Evolution Programmer will read boost directly off of the factory sensors within the truck.

can i adjust the shift points myself my truck redlines before shifting can i adjust this in stock tune
View Staff Answer 
Answer

Yes, you can adjust many parameters within the transmission to fine tune the shifting firmness, wide open throttle shifting characteristics, and many others.

Does it come with a EGT probe? 2002 f250 7.3
View Staff Answer 
Answer
Yes an EGT probe is included with the unit.
Does the dash pod come in grey?
View Staff Answer 
Answer
Yes, the dashpod is a grey color.
can i run the truck on stock tune and still see the displayed temps and pressures
View Staff Answer 
Answer
Yes, you can use the Edge 15001 Evolution as just a monitor without loading any performance tuning.
Is there a stock setting? If not how do you get back to stock if you just want to use this for gauges
View Staff Answer 
Answer
You do not have to upload a performance tune from the 15001 Evolution Programmer if you wish not to. This will allow you to use the Evolution as a monitor. If a tune file was uploaded, you simply choose the stored stock file and upload it.
Does this tuner have the ability to tune for single shot injectors?
View Staff Answer 
Answer
The Edge Products 15001 Evolution Programmer will come with a standard set of tunes and do not offer customization for any injectors other that stock injectors.

ITEM ADDED TO CART

XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.