Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Auto Meter 5323 OBDII Splitter 34039 1.00 Auto Meter 5323 OBDII Splitter
$ 39.95
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream. Features: OBDII Splitter Allows For Multiple OBDII Devices Compatible With Most 1996+ OBDII Vehicles
BD-Power 1081160 Cool Down Timer 2 848 1.00 BD-Power 1081160 Cool Down Timer 2
4 5 3
$ 200
The BD-Power 1081160 Cool Down Timer 2 eliminates the problems of shutting your engine down after a heavy haul when the exhaust gas temperature (EGT) is above normal. This can result in turbo bearing damage, but now you can protect your turbo with BDs Cool Down Timer (CDT). The CDT works with any K-Type EGT probe commonly found in most pyrometer gauge kits and has adjustable shut down temperature setting. Plus, five-minute timeout and quick shut down functions. The new design of the CDT adds increased troubleshooting ability and new installation features plus the ability to work with vehicle security alarms and in reducing regeneration of the DPF on 2008-up vehicles. Temperature shutoff requires the purchase of the EGT Probe (sold separately, see below). Features: Shut Down By Timer Shut Down By Temperature (Requires Probe) Avoid Turbocharger Damage Works With Any K-Type EGT Probe (Sold Separately, See Below) Application Note: Will not work on Push-Button start Ford Trucks.
Bully Dog 40400-105 Universal OBDII Block 25724 1.00 Bully Dog 40400-105 Universal OBDII Block
$ 34.84
The Bully Dog 40400-105 Universal OBDII Block fits the Bully Dog WatchDog and GT Tuner. It can also be used with the HandS Performance Mini Maxx and Black Maxx Tuners.
Diesel Turbo Lifesaver CM1E Control Module 34152 1.00 Diesel Turbo Lifesaver CM1E Control Module
$ 236.5
Protect your turbocharger and allow for proper cool-down with the Diesel Turbo Lifesaver CM1E Control Module. The Diesel Turbo Lifesaver is designed to automatically idle your engine and turn it off without needing the ignition key, thus saving the time and aggravation of waiting for the turbo to cool down.When you shut off a hot engine, the oil used to lubricate your turbocharger sits uncirculated and gets cooked into a carbon coating that builds up on your turbo shaft. Over time, this can cause your turbocharger to seize requiring you to spend thousands on repairs. The Diesel Turbo Lifesaver gives you the ability to adjust your engine run time from 1 to 250 minutes to allow for a proper cool down. It also features a built-in security feature to safeguard your vehicle and can be used as a pre-luber in some applications to maximize the life of your engine. Features:Computer Controller For Precision TimingBuilt-In Anti-Theft Security Feature 3-Year Unlimited Mileage Warranty Made In The USA!Note: Control module only, required install kit is not included. See related items for specific applications. Installation Kit Guide: 1994-2002 Dodge Diesel Pickups (Use D1K Installation Kit)2003-2005 Dodge Diesel Pickups (Use D2K Installation Kit) 2006-2008 Dodge Diesel Pickups (Use D3K Installation Kit)1994-1997 Ford Diesel Pickups (Use F1K Installation Kit)1999-2004 Ford Diesel Pickups (Use F1AK Installation Kit)2005-2007 Ford Diesel Pickups (Use F2K Installation Kit)2008 Ford Diesel Pickups (Use F3K Installation Kit)1999-2001 Ford Doorlock Interface Kit (Use F1 and F1AK Kit)1999-2002 Ford Factory Alarm Interface Kit (Use F2 and F1AK Kit)2001-2007 GM Duramax Pickups (Use G1K Installation Kit)
Diesel Turbo Lifesaver F1K Install Kit 2239 2.00 Diesel Turbo Lifesaver F1K Install Kit
$ 47.5
Use the Diesel Turbo Lifesaver F1K Install Kit to easily install the Diesel Turbo Lifesaver on your 1994-1997 Ford 7.3L Powerstroke. Diesel Turbo Lifesaver allows you to set an engine idle sequence to properly cool your turbocharger before engine shutdown. CM1E Turbo Timer Module is required for use and sold separately. Features: Installation Kit Works With CM1E Module (Sold Separately)
Edge Products 14050 Revolver Chip Burner 33669 1.00 Edge Products 14050 Revolver Chip Burner
$ 199.95
The Edge Products 14050 Revolver Chip Burner gives you the ability to tune Edge Products Revolver 6-Position Chips for your 1995-2003 Ford 7.3L Powerstroke. Simply purchase the blank Revolver Chips, attach them to the burner, and you'll be ready to program your Edge Revolver Chips in no time. Features: Great For Shops Programs Edge Revolver Chips Note: Additional software for such as software, drivers, and tuning files are not supplied by XDP and must be sourced through Edge Products.
Edge Products 98202 Back-Up Camera 1245 6.00 Edge Products 98202 Back-Up Camera
5 5 2
$ 179.95
Xtreme Diesel Performance is an Authorized MVP dealer. We would like you to shop with confidence knowing your purchase is covered by the manufactures warranty. The Edge Products 98202 Back-Up Camera is designed to work with the Edge Products CTS and CTS2 Monitors (not included) that have a built-in video port allowing you to connect Edge's state-of-the-art back-up camera. The CTS/CTS2's high resolution, color screen allows users to see what's going on behind them with the Edge camera connected to their existing CTS/CTS2. The camera mode automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers. Features: Elegant Design Durable Black Metal Finish Adjustable Camera Angle Parking Guide Lines Night Vision LED's Waterproof (IP67) Quick and Easy Installation Reverse/Non-Reverse Image Switch (option) Fits CTS and CTS2 Monitors (sold separately) *Camera automatically engages on most supported vehicles with automatic transmission, it will not automatically engage on manual transmission models
Edge Products 98609 EAS Power Switch w/ Starter Kit 19872 2.00 Edge Products 98609 EAS Power Switch w/ Starter Kit
$ 115.95
The Edge Products 98609 EAS Power Switch is an excellent upgrade for anyone that has or is planning to get an Edge Products CTS. This power switch wiring harness gives you the ability to install accessories such as lights or an air compressor and engage them from the CTS. Due to the easily customizable software you can name your accessory right on the screen and power your accesory right from your CTS Monitor. Features: Control Accessories From CTS Easy To Install and Operate Includes EAS Power Switch w/ Starter Kit
Edge Products 98615 EAS 12V Power Supply Starter Kit 28096 1.00 Edge Products 98615 EAS 12V Power Supply Starter Kit
$ 40.55
The Edge Products 98615 EAS 12V Power Supply Starter Kit allows the Insight CS2 and CTS2 to work on vehicles that don't have an OBDII port! By connecting to a key-switch power and ground source, an Insight becomes a digital gauge display for anything that you want to monitor! With the separate purchase of the EAS system, you can monitor EGTs, pressure readings, temperature readings, and much more. Features: 12V Harness For Non-OBDII Applications Works With Edge Products Insight CS2 and CTS2
Edge Products 98616 EAS Control Kit 28097 1.00 Edge Products 98616 EAS Control Kit
$ 208.95
The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS Power Switch is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS/CTS2 device. Install the new switch and either use Edge's MyStyle software to name your accessory or with the CTS2 rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to 6 gauges and 4 rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off. Features: For CTS and CTS2 Add Power Switch Monitor EGT's Kit Includes: EAS Starter Kit EAS EGT Probe EAS Power Switch
Edge Products 98617 EAS Competition Kit 28098 2.00 Edge Products 98617 EAS Competition Kit
$ 364.95
The Edge Products 98617 EAS Competition Kit is the perfect option for those enthusiasts that want to maximize the use of their Edge Insight. The EAS Compeition Kit gives you the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated their Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: Fits Edge CS/CS2 and CTS/CTS2 Includes Multiple Sensors For Monitoring Vitals Kit Includes: EAS Starter Kit EAS EGT Probe EAS Universal 5 Volt EAS 0-100 PSig Pressure Sensor EAS -40F To 300F Temperature Sensor
Edge Products 98618 EAS Data Logging Kit 28099 3.00 Edge Products 98618 EAS Data Logging Kit
$ 676.95
The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring. This kit is designed for truck owners who have upgraded turbo or turbo's, and other mods where the stock sensors just aren't enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge Data Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance. The EAS EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. This kit is ideal for the daily diesel driver or if you are towing then it's a must have! Towing can put a lot of strain on the truck and make it run hot. Don't be left on the side of the road with an overheated truck because you didn't watch your Exhaust Gas Temperatures with the Edge EAS EGT. The EAS 0-100 PSIg Boost Sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. Simply install this sensor, use MyStyle to set up the sensor, and have the ability to see what kind of boost you can build. Or maybe you are trying to fine tune your truck and need to install a drive pressure sensor or fuel pressure sensor the Edge 0-100 PSIg sensor is your answer. The EAS Temperature Sensor is a -40F to 300F 1/8 NPT sensor that will allow you to monitor things like Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Another great solution for those with aftermarket accessories. Additionally, Edge Products has updated our Data Logging Software to now export all data logs into a CSV (Excel) file to save and compare runs, view, graph and improve tuning. To view CSV data log files, you must use MyStyle software or export it from MyStyle software. These new releases make the Insight CS2 and CTS2 the industry leader in digital gauge/data logging for any enthusiast! Features: For Edge CS2 and CTS2 Multiple Sensors For Data Logging Kit Includes: EAS Starter Kit (2) EAS EGT Probes (2) EAS Universal 5 Volt (2) EAS 0-100 Psig Pressure Sensor (2) EAS -40 To 300F Temperature Sensor
Edge Products 98620 EAS Expandable EGT Probe With Lead 31307 1.00 Edge Products 98620 EAS Expandable EGT Probe With Lead
$ 122.95
The Edge Products 98620 EAS Expandable EGT Probe With Lead allows you to monitor exhaust gas temperatures with your Edge Product CS, CTS, CS2 and CTS2. The Expandable designed allows you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics. Features: Measures Exhaust Gas Temperatures Fits CS, CTS, CS2 and CTS2 Monitors Expandable Design - Works With Edge Product EAS System
Edge Products 98621 EAS Revolver To Insight Cable 33706 1.00 Edge Products 98621 EAS Revolver To Insight Cable
$ 81.55
The Edge Products 98621 EAS Revolver To Insight Cable gives you the ability to control your Edge Products Revolver Chip in your 1995-2003 Ford 7.3L Powerstroke with just the touch of a button through the Insight CTS2! Controlling your Revolver Chip through the Insight CTS2 not only allows you to instant access to all the settings on your Chip, it also gives you the ability to monitor vital engine parameters such as boost, EGT's, and more through Edge Products innovative touch-screen, digital gauge display (sold separately). Features: Works With Edge Revolver Chip Allows For Revolver Control Through Insight CTS2 Note: Insight CTS2 and Revolver Chip sold separately.
Edge Products 98920 EAS Replacement EGT Lead 31309 1.00 Edge Products 98920 EAS Replacement EGT Lead
$ 30.55
The Edge Products 98920 EAS Replacement EGT Lead is a replacement for the original lead that comes with the Edge Products 98620. Features: 15" Lead Replacement For 98620
Edge Products Accessory System EAS (expandable) 4399 1.00 Edge Products Accessory System EAS (expandable)
$ 30.16
The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS or CTS. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. My Style Software Add up to 16 additional sensors with the EAS universal senor input. Then setup, configure and customize those sensors through Edges My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS or CTS and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units, EGT PROBE The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise. TURBO TIMER A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed. EAS UNIVERSAL SENSOR INPUT The EAS Universal Senor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS and CTS! Using the Edge Accessory System provides the following benefits: Using My Style software, sensors can be easily configured and renamed. Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS or CTS device. Note: Sensors from the manufactures other than Edge can also be attached to a CS or CTS device through the EAS universal sensor input. Eliminates the necessity of routing multiple wires to the CS/ CTS monitor. EAS PRESSURE SENSOR Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more. Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C. EAS TEMPERATURE SENSOR The EAS Temperature Sensor is a 40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Senor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS and CTS monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today. EAS AMBIENT TEMPERATURE SENSOR If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a 40F to 230 F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now youll never wonder what outside temperature is again. * - EAS Starter Kit Cable required ** - EAS Starter Kit Cable and EAS Universal Sensor Input required The EAS Starter Kit Cable is required to connect a EAS system to any CS or CTS device. Only one EAS starter kit Cable required per CS or CTS device. The EAS Universal (5 volt) Sensor Input is also required to add any sensor. One Universal Sensor Input can connect up to 2 different sensors. Part Numbers and Applications: EAS Starter Kit Cable (required For EAS) - 98602 EAS EGT Expandable w/o Starter Kit - 98611 EAS Turbo Timer (Dodge 2006-2012 Only) - 98612 EAS Turbo Timer - 98604 EAS Universal Sensor Input (5 Volt) - 98605 EAS Pressure Sensor 0-100 psig 1/8 NPT - 98607 EAS -40F to 300F 1/8" NPT Temp Sensor - 98608 EAS Ambient Temp Sensor -40F tp 230F Waterproof 0.2" diameter sensor - 98610
Longhorn Fab 201043 OBDII Port Splitter 33713 2.00 Longhorn Fab 201043 OBDII Port Splitter
$ 54.99
The Longhorn Fab 201043 OBDII Port Splitter is the perfect solution to the common problem of multiple aftermarket electronics requiring use of the OBDII port. Instead of unplugging your digital gauges to hook up the laptop, the OBDII Port Splitter gives you the ability to have (2) connections at once. Features: Fits OBDII Vehicles Allows (2) OBDII Connections
TS Performance 1170400 6-Position Switch 34554 1.00 TS Performance 1170400 6-Position Switch
$ 50
The TS Performance 1170400 6-Position Switch is a direct replacement for your 1995-2003 Ford 7.3L Powerstroke with TS 6-Position Chip. This switch is offered as a direct replacement for those who have damaged or lost the existing switch on their TS Chip.Features: 6-PositionsReplacement Switch Works with TS 6-Position Chip